Search
76 articles for “deposition time”
-
Flower-like ZnO Thin Film Deposited by Chemical Bath Deposition
Abstract: The ZnO flowers were prepared by chemical bath deposition (CBD), low transmittance in the ultraviolet region was observed, the band gap decreases with increase in deposition time. The SEM images of the deposited ZnO revealed that the films are flower-like with well-developed petals. The XRD of the film are crystal with several peaks. Prominent among them are the peaks at 2θ values of around 32.5°, 35.9° and 38.5° corresponding to …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 3, Issue 1, 2013 Read article
-
Selection and Preparation of Solvent for Wax Dissolution in Heavy Crude Oil Wells
Abstract: Remedial measures for wax deposition problems in production wells are very hectic due to production down time and expenditure required for removal of heavy and waxy crude oil. Chemical treatment techniques with solvent formulation derived from many laboratory experiments were carried out with the waxy crude oil sample to recover the solidified wax inside the pipelines and wellbores. A list of chemical solvents including three dispersants was mixed in different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 7, Issue 1, 2016 · pp. 50–57 Read article
-
Study of Electrochemical and Mechanical Properties of Graphene/HAp Composite Coating on Ti-13Nb-13Zr Alloy via Electrophoretic Deposition for Biomedical Application
Abstract: Titanium-13niobium-13zirconium alloy has widespread potential in biomedical applications due to its high degree of biocompatibility, favourable mechanical properties, high corrosion resistance, and high possibility of osseointegration. The surface was improved by electrophoretic deposition method using hydroxyapatite and graphene (5 g nanoHAp) (5 g nanoHAp+0.06 nanoGr) and suspended in ethanol solution at different conditions of time (1, 3, and 7 minutes) and voltage (50, 70, and 100 V). The effect of …
Published in Journal of Polymer & Composites · Vol. 11, Issue 2, 2023 · pp. 91–106 Read article
-
IoT-Based Smart Waste Tracking & System for Monitoring
Abstract: In an era of rapid urban growth—driven by continued population growth and greater waste dispersion due to unregulated disposal practices by all citizens—a major challenge is emerging in the effective management of solid waste in urban environments. This project proposes a solution to this challenge: a Smart Waste Tracking & System for Monitoring. In this system, every household is provided with an RFID card, which they must use each time …
Published in International Journal of Environmental Noise and Pollution Control · Vol. 4, Issue 2, 2026 · pp. 12–23 Read article
-
Angiography
Abstract: The heart is a beating muscular organ that continually pumps blood to the rest of the body. The coronary arteries supply the heart with the necessary oxygen and nutrients it needs to function effectively. Over time, fatty deposits called plaque can build up inside the arteries, clogging the passages and blood flow to the heart can be compromised. Coronary artery disease has reached epidemic proportions in South East Asia especially …
Published in Research and Reviews : Journal of Surgery · Vol. 4, Issue 3, 2015 · pp. 14–17 Read article
-
Digital Entry of Bank Related Slips Using Character Recognition
Abstract: Standing in long queues in bank for small work like depositing the money is very frustrating and also wastes a lot of time. The bank employee handles all the work such as making the entry of money deposited or credit from the account manually by typing information such as account number, amount, etc. and due this creates long queues in banks for such small tasks. Thus, we have come up …
Published in Trends in Opto-electro & Optical Communication · Vol. 11, Issue 3, 2021 · pp. 30–35 Read article
-
Application of Atomic Force Microscopy for the Study of Lithium-Ion Batteries
Abstract: Development of advanced Lithium Ion Batteries (LIBs) represents a fast growing field of science and technology. However, many fundamental problems remained unresolved due to lack of understanding of surface/interface phenomenon of LIB on nanometer scale. Here, we review recent applications of atomic force microscopy to study three key aspects of lithium ion batteries namely solid electrolyte interface, ion transportation and dendrite growth. In situ AFM is an ideal tool for …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 3, 2015 · pp. 35–47 Read article
-
Study of Anti-Cancer Activity of Leaves Extract of Murraya Koenigii in Human Lung’s Cells
Abstract: The extract of Murraya Koenigii commonly known as curry leaves in India was carried out to investigate the anti-cancer activity on human lung’s cells. The result shows positive indication of extract against lungs cancer cells efficiently with GI 50 value >80. The human lung’s cells were fixed in situ by the gentle addition of 50 μl of cold 30 % (w/v) TCA (final concentration, 10 % TCA) and incubated for …
Published in Research & Reviews : Journal of Herbal Science · Vol. 9, Issue 1, 2020 Read article
-
Utilizing Machine Learning to Predict the Dimensional Variation of Shafts Printed using Fused Deposition Modeling
Abstract: With the onset of the fourth industrial paradigm, additive manufacturing techniques are coming to the forefront in mechanical engineering domain. The technological burgeoning of additive manufacturing, particularly 3-D printing, has observed substantial growth in rapid prototyping, functional part manufacturing, and tooling because it has significantly reduced the manufacturing costs and processing time. One of the most commonly used techniques of additive manufacturing is Fused Deposition Modelling (FDM), examining and controlling …
Published in Trends in Mechanical Engineering & Technology · Vol. 11, Issue 2, 2021 · pp. 41–46 Read article
-
Sedimentation Yield Analysis of Hatnur Dam using SWAT and GIS
Abstract: Sedimentation in reservoirs throughout the world are leading to loss of reservoir storage capacitythereby reduces the useful lifetime of dams. Storage reservoirs built across rivers or streams tend tolose their water storage capacity progressively with the passage of time due to sedimentation. After thedesigned sediment deposition capacity of the reservoir, further addition in sediment deposits affectsthe reservoir regulation operations. It’s therefore necessary to assess reservoir sediment depositioncapacity and plan for …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 3, 2021 · pp. 30–39 Read article
-
Deep Learning for Real-Time Monitoring and Defect Detection in Additive Manufactured Polymer Composites
Abstract: Additives Fiber-reinforced polymer composite ADDs have high utility in making lightweight structural components, but due to process-related defects (interlayer delamination and reinforcement stacking) the integrity of consolidation during extrusion-based deposition is frequently compromised. This paper has presented a physics-informed deep learning framework that is applicable to real-time measurements of reinforced thermoplastic composite fabrication. Multimodal sensing was provided with thermal gradient, optical morphology, and acoustics emission signals being used to assess …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 974–999 Read article
-
Analysis of Sedimentation Deposition in Morbe Reservoir by Using RS and GIS
Abstract: The reduce in the storage volume due to sediment deposits in the reservoir at different level over a period of time can be related with the decrease in water diffusion zone at different elevation. This study shows the use of RS and GIS to estimate reservoir sediment deposits. The 2007 original capacity curve of water storage is now used as base for the 2017–18 sediment assessment. The digital processing was …
Published in Journal of Remote Sensing & GIS · Vol. 11, Issue 1, 2020 · pp. 16–26 Read article
-
Assessment of Reservoir Storage Capacity and Silt Deposition Using Advanced Instruments: A Case Study
Abstract: Reservoirs on the upstream side of sediment-laden river dams fill with sediment over time, lowering their storage capacity. This research focuses on advanced instrumentation techniques used to analyse storage capacity and estimate the quantity of sedimentation deposited in the reservoir at Kadana Dam, Kadana Village, Mahisagar District, Gujarat, India. During the research investigations, a multi-frequency acoustic system with frequencies of around 33 KHz and 210 KHz was employed to assess …
Published in Journal of Control & Instrumentation Read article
-
Assessment of Reservoir Storage Capacity and Silt Deposition Using Advanced Instruments: A Case Study
Abstract: Reservoirs on the upstream side of sediment-laden river dams fill with sediment over time, lowering their storage capacity. This research focuses on advanced instrumentation techniques used to analyse storage capacity and estimate the quantity of sedimentation deposited in the reservoir at Kadana Dam, Kadana Village, Mahisagar District, Gujarat, India. During the research investigations, a multi-frequency acoustic system with frequencies of around 33 KHz and 210 KHz was employed to assess …
Published in Journal of Control & Instrumentation · Vol. 12, Issue 3, 2021 · pp. 27–37 Read article
-
Smart Drainage Cleaning System: A Technological Intervention for Occupational Health and Urban Sanitation
Abstract: Manual drainage maintenance in urban environments remains a hazardous task, exposing sanitation workers to toxic gases, infections, and life-threatening accidents. This paper presents the development of an automated 12V Smart Drainage Cleaning System designed to eliminate manual scavenging and enhance cleaning efficiency. The robotic model operates on a 12V DC power supply, integrating an ultrasonic sensor for real time obstacle detection and automated navigation within narrow drainage pathways. The core …
Published in Journal of Industrial Safety Engineering · Vol. 13, Issue 2, 2026 · pp. 16–27 Read article
-
Sedimentation Analysis of Pench Dam using SWAT and SWAT-CUP Algorithm
Abstract: The Soil and Water assessment tool (SWAT) can be a very important tool to analyze the sediment as the determining the actual sediment deposit requires the very extensive observations of the sediment and it can be very much expensive and time consuming. The SWAT model along with little input of observe data can be used with proper calibration technique as the actual data for sedimentation and studying the changes in …
Published in Journal of Water Resource Engineering and Management · Vol. 8, Issue 2, 2021 · pp. 19–61 Read article
-
Effect of Local Application of Phenytoin on Wound Healing in Surgical Wounds: A Scientific Review
Abstract: Surgical wound healing is a dynamic biological process influenced by local tissue response, vascularity, infection control, and systemic patient factors. Delayed wound healing contributes significantly to postoperative morbidity and healthcare costs. Phenytoin, a hydantoin derivative traditionally used as an antiepileptic agent, has demonstrated unexpected wound-healing properties when applied topically. This review critically evaluates experimental and clinical evidence regarding the role of locally applied phenytoin in enhancing wound healing in surgical …
Published in Research and Reviews : Journal of Surgery · Vol. 15, Issue 1, 2026 · pp. 15–19 Read article
-
Estimation of Dose Distribution in Patient Undergoing Hysterosalpingography Fluoroscopy-Guided Medical Procedure
Abstract: Real time imaging allows a wide range of exposure than the conventional radiography for producing diagnostic images. Hysterosalpingography (HSG) is an effective method of evaluating abnormalities of the uterus and fallopian tube using real-time fluoroscopic procedure. The main purpose of this study was to assess the possible radiation dose deposited into different organs of female patients undergoing HSG during the reproductive period. The study was conducted at radiology department of …
Published in Research & Reviews : Journal of Physics · Vol. 9, Issue 3, 2020 · pp. 1–7 Read article
-
A Review on Thin Film Production by Convectional and 3-D Printing Methods
Abstract: Thin film production and manufacturing has gained importance in digital world mainly due to its usage in PCBs , Energy storage cells, solar panels etc. This paper reviews various techniques implemented for thin film applications such as PVD, CVD, Roll To Roll (RTR, extrusion based on casting) and 3-D printing techniques. It also gives a comparative study of both convection methods and 3-D printing techniques thereby inferring that printing method …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 10–15 Read article
-
Enhanced Iron Removal in Experimental Iron Overload by Nanoniosomes of Desferrioxamine
Abstract: This preliminary study explores the feasibility of employing nanocapsules prepared from nonionic surfactant vesicles (niosomes) as a carrier for an iron-chelating agent, Desferrioxamine (DFO, Desferal), to enhance iron excretion from the body. The methodology consisted of creating an iron overload model in an experimental animal followed by measurement of iron excretion pattern in the urine by atomic absorption spectrophotometry. Niosomes were prepared with span 60: cholesterol:dicetyl phosphate by the lipid …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 5, Issue 1, 2014 · pp. 14–20 Read article