Search
35 articles for “crack initiation”
-
Modeling and Analysis of Crack Initiation in a Cylindrical Specimen
Abstract: In an engineering component subjected to variable loading/cyclic stressing, the stress and stress state, particularly the plastic strain and the triaxiality, play an important role in determining its life. Ductile materials predominantly fail by void growth, and crack initiation in ductile material can be associated with a specified volume of voids. Estimation of this crack initiation life and the remaining life through analytical modeling and comparing it through experimental testing …
Published in Trends in Mechanical Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 20–28 Read article
-
The Influence of The Oxide Layer on The Stress Corrosion Cracking Initiation in The Case of Incoloy 800 in The Alkaline Environment
Abstract: Oxidized and non-oxidized C-rings cuts from Incoloy 800 tubes were tested with the purpose to study the influence of the oxide layer in the first step of the stress corrosion cracking (SCC) mechanism. A mechanical pre-crack of 100mm depth was executed on the external side of the C-rings in order to create some stress concentrations. The oxidized C-rings were obtained by autoclaving for 20 days in demineralised water adjusted with …
Published in Journal of Nuclear Engineering & Technology · Vol. 2, Issue 2-3, 2012 · pp. 11–19 Read article
-
Crack Initiation, Propagation and Stress Intensity Factor of Rectangular Plate with Circular Hole by FEA Approach
Abstract: The study of crack behavior in a plate with hole is a considerable importance in the design to avoid the failure. This situation has a look at offers with investigation of stress intensity factor, von-mises stress (ϭ von-mises) at the finite center cracked plate subjected to uniform tensile loading depends at the assumptions of linear elastic fracture mechanics (LEFM) and plane strain problem. The stress intensity factors mode I (KI) …
Published in Journal of Experimental & Applied Mechanics · Vol. 11, Issue 3, 2020 · pp. 13–36 Read article
-
Phase – Field Modeling of Brittle and Ductile Fracture Under Complex Loading Conditions
Abstract: Phase-field modeling has emerged as a powerful computational framework for predicting fracture behavior in engineering materials, offering a unified description of crack initiation, propagation, branching, and coalescence without the need for explicit crack tracking. This study presents an in-depth examination of phase-field modeling applied to both brittle and ductile fracture under complex loading conditions, including multiaxial stress states, cyclic loading, thermal gradients, and dynamic impact. The phase-field approach regularizes the …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 13–18 Read article
-
Damage Evolution and Delamination Resistance in Polymer Matrix Functionally Graded Laminates
Abstract: Functionally graded laminates (FGLs) in polymer-matrix systems represent a promising pathway to enhance damage tolerance and delay delamination in advanced structural composites. In this study, we explore the mechanisms of damage initiation, propagation, and delamination resistance in polymer matrix functionally graded laminates (PM-FGLs) through a combined experimental–computational approach. Laminates with linear, exponential, and bio-inspired gradation profiles were fabricated using vacuum-assisted resin transfer molding (VARTM) and additive manufacturing techniques. Comprehensive mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 321–337 Read article
-
Evaluation of Critical Crack Position on the Curved Surface under Mechanical Load: FEA Approach
Abstract: Abstract: Influence of initial crack position on the stress distribution around the crack tip is always taken into account for the failure analysis of metallic structures. Evaluation of Stress Intensity Factor for cracks of various orientations was carried out using Finite Element Analysis technique. These Stress Intensity Factors were used to calculate energy release rate for the various orientations. Next, thus obtained energy values have been compared with energy values …
Published in Journal of Instrumentation Technology & Innovations · Vol. 9, Issue 1, 2019 · pp. 1–6 Read article
-
Numerical Simulation of Crack Growth in Dynamic Loading Conditions
Abstract: Because it is crucial for forecasting structural failures in engineering applications, crack formation in materials under dynamic loading circumstances has become a crucial study topic. In this work, finite element methods (FEM) are used to numerically simulate fracture propagation in dynamic stress situations. The impact of loading rates, material characteristics, and crack geometries on crack growth patterns are assessed in a thorough parametric research. The work uses sophisticated computational methods …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 30–34 Read article
-
Fracture Analysis of Functionally Graded Material (FGM) Plates Using Extended Finite Element Method: A Review.
Abstract: Functionally Graded Materials (FGMs), have drawn a lot of interest in various engineering applications due to their superior mechanical properties and ability to withstand extreme conditions. Fracture analysis in FGMs focuses on understanding how cracks initiate and propagate within these complex materials. The stress distribution becomes irregular due to spatial property variations which produces different crack paths than what occurs in homogeneous materials. The examination of FGM plates under fracture …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 4, Issue 1, 2026 · pp. 9–15 Read article
-
Evaluation of J-Integral and Fatigue Crack Growth Rate of Semi-elliptical Crack in Compressor Blade
Abstract: Gas turbine compressor blades are subjected to centrifugal, gas bending and vibratory loads. This repeated loading and unloading can reduce the life of compressor blades. This research aims at the estimation of fatigue crack growth rate of various three-dimensional cracks in a compressor blade considering the J-integral calculations for a semi-elliptical crack, subjected to centrifugal loading. Static stress analysis was carried out to ascertain the critical region or crack zone …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 39–46 Read article
-
Evaluation of J-Integral and Fatigue Crack Growth Rate of Semi-elliptical Crack in Compressor Blade
Abstract: Gas turbine compressor blades are subjected to centrifugal, gas bending and vibratory loads. This repeated loading and unloading can reduce the life of compressor blades. This research aims at the estimation of fatigue crack growth rate of various three-dimensional cracks in a compressor blade considering the J-integral calculations for a semi-elliptical crack, subjected to centrifugal loading. Static stress analysis was carried out to ascertain the critical region or crack zone …
Published in Trends in Mechanical Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 39–46 Read article
-
Role of Fatigue and Creep in Structural Damage: A Comprehensive Review
Abstract: Fatigue and creep are two critical degradation mechanisms that significantly influence the structural integrity and longevity of engineering materials. These phenomena arise due to different loading and environmental conditions but often coexist in various industrial applications, leading to severe material degradation over time. Fatigue primarily results from cyclic loading, where repeated stress variations induce microstructural damage and crack initiation, ultimately causing catastrophic failure. Conversely, creep occurs under sustained stress at …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 22–26 Read article
-
Synthesis and formability of Al/(Fe-Mn) particulate compositeusing stir casting
Abstract: Demand for lightweight and fuel economy by automotive and aircraft industries focuses to explore different materials. Alloys and composites developed with same objective to obtain superior desired mechanical properties compatible for such intended applications. However, alloy consider as solid solutions with metallic properties and cannot mix with primary major element in random proportions. This forced researcher community to develop composites, which are heterogeneous solid solutions or multi-phase materials comprising matrix …
Published in Journal of Polymer & Composites · Vol. 10, Issue 1, 2022 · pp. 80–88 Read article
-
Reduction of Hydrogen Embrittlement of HSLA Steel by Ion Implantation Surface Modification Technique
Abstract: There are many techniques available for the surface modification of the substrate. One of the important ion implantation techniques is plasma source ion implantation (PSII). Ion implantation is a vacuum process in which a beam of ions is directed to the surface and introduced into it. This technique produces minimum invasion of the bulk properties of the substrate. Nitrogen plasma ion implantation treatments were done on the substrate, Cu-strengthened HSLA …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 1, Issue 1, 2014 · pp. 20–33 Read article
-
Modeling the Influence of Microcrack Healing on Deformation of Asphalt Concrete Using NDT
Abstract: Asphalt concrete pavement practices heavy loading and environmental impacts through its service life. Micro cracks usually initiate and accumulate to form various types of distresses. However, asphalt concrete has the ability of self-healing with rest periods and hot environment conditions. The mechanical properties of Asphalt concrete is complex due to its dependency of temperature, loading frequency, and strain level. In this investigation, asphalt concrete specimens of wearing, binder and base …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 37–47 Read article
-
Study of Strength of Composite Laminates with Ply- Discontinuities Using FEM
Abstract: Present research work attempts to understand the effect of ply-discontinuities on the strength of the FRP Composite. Finite Element Analyses have been performed for specimen undergoing four-point bend loading condition using ABAQUS software. Three specimens consisting of different ply sequences, same resin pocket size and location have been considered for the present analysis. Cohesive zone modelling technique is implemented to simulate and predict crack propagation pattern during failure of composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 89–98 Read article
-
Life Assessment of a Pre Cracked Cricket Bat
Abstract: Cricket is an interesting game played in many countries wherein a bat made of willow wood is used to strike a leather ball to score runs. This bat fails at a much faster rate in the presence of a crack when compared to a normal bat. In this study, an attempt is made to assess the life of a pre-cracked cricket bat. A crack is initiated in the weak spot …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 3, 2019 · pp. 22–29 Read article
-
Integrated Dam Automation: Real-Time Monitoring and Controlling Using IoT
Abstract: Dam automation is a critical area in water resource management, especially given the rising demand for sustainable and safe water control systems. An integrated approach to dam automation involves implementing advanced sensors and monitoring systems to improve structural safety, water quality, and resource management. This paper presents a comprehensive automation model that combines crack detection, convolutional neural networks (CNNs), water level monitoring, turbidity sensing, and rainfall data to ensure real-time …
Published in Journal of Microcontroller Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 31–38 Read article
-
Nonlinear Finite Element Analysis of Reinforced Concrete Exterior Beam Column Joint Subjected to Monotonic Loading
Abstract: A numerical analysis of exterior beam-column joint subjected to constant axial load on the column top and monotonic load applied at the beam tip is presented in this work. A strain-based nonlinear finite element program is developed in MATLAB R2009a. The nonlinear analysis of reinforced concrete structural member is carried out considering it as a two-phase system. The concrete in nonlinear range is considered as orthotropic material having different stress-strain …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 2, 2014 · pp. 12–21 Read article
-
Fatigue Assessment for Pump Tower Tubular Joints under Partial Penetration Welds
Abstract: ABSTRACT In this paper the fatigue capacity of the tubular joints of the tripod pump tower structure installed in the cargo tanks of membrane type LNG vessels is studied using fatigue assessment methodology specified in Class Code such as DNVGL-RP-0005 [1]. The stress concentration factors and the S-N curve used in this methodology are normally valid for the weld toe location where fully penetration weld is applied. The current study …
Published in Journal of Offshore Structure and Technology · Vol. 4, Issue 2, 2017 · pp. 1–27 Read article
-
Assessment of Matrix Cracking and Fiber Breakage in Hybrid Composite Materials.
Abstract: Hybrid composite materials, combining two or more distinct fiber or matrix constituents, have emerged as advanced structural solutions for aerospace, automotive, marine, and civil engineering applications. However, their complex microstructure makes them susceptible to multiple interacting damage mechanisms, particularly matrix cracking and fiber breakage. This study provides a comprehensive assessment of these damage modes, emphasizing their initiation, evolution, and combined effects on the mechanical integrity of hybrid composites. Matrix cracking …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article