Search
34 articles for “cooling time”
-
The effect of cooling time and colorant pigment on the dimensional accuracy of plastic injection molded closure
Abstract: Dimensional accuracy is a critical aspect of precision injection molding, with the products generally required to conform to set tolerances. Major causes of these deviations are reported to be related to the polymer material, part geometry, injection mold design, and process parameters. This study investigated the effects of material color pigment and its interaction with process cooling time on product dimensional accuracy. This study was conducted experimentally, where three levels …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 93–100 Read article
-
Design of Evaporator and Condenser for Solar Adsorption Refrigeration System
Abstract: Solar adsorption refrigeration systems provide a promising alternative for sustainable cooling in regions with limited grid access and high solar availability because they can convert low-grade thermal energy into refrigeration without mechanical compression. The performance of such systems depends strongly on the thermal behavior of the evaporator and condenser, since these components govern the refrigerant evaporation rate, condensation effectiveness, and overall cycle stability. This paper presents focus on the design …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 13, Issue 2, 2026 · pp. 1–10 Read article
-
Dynamic Simulation of Load-Responsive Vapor Compression Refrigeration Systems
Abstract: Because of their dependable operation and effectiveness, vapor compression refrigeration systems, or vapor compression refrigeration (VCRS), have become popular in commercial, industrial, and residential settings. However, under different thermal loads, classic vapor compression refrigeration (VCR) systems may perform less well in that they are usually built for steady-state conditions and run at consistent speeds. In order to improve a load-responsive VCR system’s flexibility, energy efficiency, and response to changing cooling …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 12, Issue 2, 2025 · pp. 32–37 Read article
-
Fabrication and Characterization of Hybrid Composites Using Natural Fibers Reinforced in HDPE and Optimization of Injection Moulding Process Parameters to Minimize Shrinkage
Abstract: Materials are crucial for advancing human living standards. Over the past 20 years, composite materials have garnered significant attention owing to their unique properties and applications across various sectors. This study outlines the creation and analysis of a novel series of natural fiber-based composites, which incorporate jute, sisal, and hemp as reinforcements, with high-density polyethylene (HDPE) serving as the matrix, and produced through injection moulding. This study examines the effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 556–585 Read article
-
Nuclear Reactor Safety Using Seismic and Natural Disaster Protection: A Study
Abstract: Nuclear energy has enormous power and is essential to the global effort to provide clean, sustainable electricity, but it also carries a huge responsibility: guaranteeing its complete safety. Nuclear energy is at a turning point. Nuclear power provides a potent, carbon-free answer as the globe struggles with climate change and the pressing need to decarbonize energy grids. However, public fear, primarily from past mishaps like Chernobyl and Fukushima, continues to …
Published in Journal of Nuclear Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 25–34 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Thermal Comfort Analysis Thermostat Valve
Abstract: Recent analysis that has given performance on the basis of thermal analysis of thermostat valve. Play an important role in automobile Cooling system. And its performance can change according to its different temperature conditions. Thermostat valve has been extensively study with the primary direction it's Bring Down engine temperature and upgrade performance of engine. Thermostat valve play an important role in automobile cooling system for durable the engine temperature in …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation Read article
-
Effect of Calcination Condition and Cooling Method on Reactivity of Lime Sludge
Abstract: In this Experimental Study, Raw Lime sludge from the Paper industry was characterized by XRD and TGA techniques. Lime Sludge was calcined for a temperature range of 550–7500C for 2 h and cooled by air cooling. The effect of calcination temperature on the reactivity of resultant Sludge was investigated by various indirect and direct methods of pozzolanic activity assessment such as the Strength Activity Test(SAI), Lime reactivity test, XRD, TGA, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 36–48 Read article
-
Critical Review on Multifunctional Polymer Composites for Weight Reduction and AI Based Battery Thermal Management in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for advanced materials and intelligent control systems capable of improving energy efficiency, driving range, thermal safety, and overall vehicle sustainability. This paper presents a critical review of multifunctional polymer composites and artificial intelligence-based battery thermal management systems (AI-BTMS) for next-generation EV applications. Polymer composites reinforced with carbon fibers, graphene, boron nitride, nanoclays, and carbon nanotubes offer significant advantages over …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 603–619 Read article
-
Design of a Water-Cooling System for the Inside Roof of 20t Electric Arc Furnace for Oxygen Blow Decarburization Using CFD Analysis
Abstract: An electric arc furnace (EAF) roof usually works at high temperature for a long time, undergoes not only heat radiations from electric arc, molten metal, and lining of high temperature, but also is washed and affected by chemical erosion due to high temperature and gas flow. In addition, it might be eroded by slag with high temperature. In， inside roof of EAF is more severely affected by heat load than …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 3, 2024 · pp. 11–17 Read article
-
Development and Performance Evaluation of GO–ZnO/PU Hybrid Nanocomposite Coatings for Improved Optical Transmission, Cooling, and Self-Cleaning in PV Systems
Abstract: The performance of solar photovoltaic (PV) modules with time is affected by thermal heating, dust buildup, and exposure to ultraviolet (UV) light; as a result, the power loss increases rapidly during the use condition. In this study, a polyurethane (PU) nanocomposite, fabricated with graphene oxide and zinc oxide (GO–ZnO), is invented and examined. Improvements in heat management, light transmission, and dirt resistance are planned for PV glass surfaces. The nanocomposite …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 243–249 Read article
-
Sustainable Construction: A Case Study of Passive Cooling Using Various Insulation Materials in an Educational Institution
Abstract: This case study is about insulating an education building where steel sheets are used on the rooftop. Steel roof sheets are good conductors of heat and due to which the classrooms below become heated up especially in the summer season from January to May every year. This educational building was constructed in 2014 and the heat build-up is intense and hence the top floor i.e. second floor was mostly unutilised …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 2, 2024 · pp. 23–31 Read article
-
Evaluating the Performance of a Smart VCR System Using Python for Data Analysis Based on IoT
Abstract: Commercial buildings use a significant amount of electricity, with around 60% to 80% being attributed to the HVAC system. Implementing IoT and smart sensors can help reduce this consumption by 10% to 30%. To lower the electricity usage of air conditioners, a study has proposed an IoT-based smart VCR system with sensors, meters, gateway, and cloud computing modules. This system is designed to collect data and regulate the VCR system …
Published in Journal of Control & Instrumentation · Vol. 15, Issue 2, 2024 · pp. 7–23 Read article
-
Stretchable Elastomer–PCM Composites with Bluetooth-Enabled Temperature Monitoring for Wearable Healthcare IoT Devices
Abstract: The rapid advancement of wearable healthcare technologies has created a growing demand for multifunctional polymer composites capable of simultaneously providing mechanical flexibility, thermal energy management, electrical conductivity, sensing capability, and wireless communication. In this study, a stretchable elastomer-based polymer composite integrated with a phase-change material and a Bluetooth Low Energy temperature monitoring system was developed for wearable healthcare Internet-of-Things applications. The polymer composite was fabricated using an Ecoflex silicone elastomer …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 241–257 Read article
-
Experimental Analysis Of Thermal Behaviour Of Phase Change Materials In Cooling Applications Of Roof Top Building Slabs
Abstract: In this research article, different phase change materials are incorporated inside the slabs to reduce the heat transfer from the roof. Experiments are conducted during summer season March 2021 to the time lag decrement factor and heat flux to that of results are compared with RCC slab to that of Green material I (CaCl26H2O) and Green Roof with Green material II (48%CaCl2+4.3%NaCl+0.4%KCl+47.3%H2O). On comparison Green Slab II is having better …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 102–114 Read article
-
Overheating Prevention System to Improve the Solar Effcicency: Simulation in Logosoft
Abstract: This project aims to improve the efficiency and longevity of solar panels by preventing overheating through an automated cooling system. The system guarantees solar panels operate efficiently, reliably, and sustainably. The proposed system also includes a feedback-based control mechanism that assesses temperature changes on an ongoing basis to enhance cooling cycles and reduce superfluous water consumption. Using LOGO!Soft Comfort software for simulation, the system integrates a temperature sensor to monitor …
Published in Trends in Electrical Engineering · Vol. 16, Issue 1, 2025 Read article
-
Investigation of Mechanical Properties in Ductile Iron with Alloyed and Unalloyed at Time and Temperature on Austempering
Abstract: Due to the combination of its numerous excellent mechanical qualities, the flexible iron has been used more and more since its invention in 1948. To develop significantly improved characteristics, the unnecessary investigation is being done. The most recent development in the field of flexible iron, or SG iron, is Austempererd malleable iron. At four different temperatures, two different types of spheroidal graphite (SG) cast iron samples with varying copper weight …
Published in Journal of Polymer & Composites · Vol. 11, Issue 9, 2023 · pp. 1–9 Read article
-
Choosing the Right Machine: A Comparative Analysis of Desktops and Laptops
Abstract: This study provides a comparative analysis of desktop and laptop computers, focusing on factors such as performance, portability, cost, and user requirements. Desktops are highlighted as the preferred option for resource-intensive tasks like gaming, video editing, and handling large-scale data because of their powerful processors, efficient cooling mechanisms, and expandability. These systems are well suited for users who prioritize high performance and the ability to upgrade components over time. On …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 3, 2025 · pp. 41–49 Read article
-
Enhancing Power Conversion Efficiency in Tandem Solar Cells with Temporal Dynamic Graph Neural Network
Abstract: In modern homes, people want good comfort and also less electricity bill, so managing heating load and cooling load become very important. Heating Load (HL) and Cooling Load (CL) depend on many things like wall material, window size, sunlight, ventilation, and weather. Because of this many factors, calculation and optimization of HL and CL is little difficult and many time normal formulas give wrong or not perfect results. So in …
Published in Journal of Semiconductor Devices and Circuits · Vol. 13, Issue 2, 2026 Read article
-
Modeling Galaxy Formation in a Hierarchical Universe: A Fiducial Approach and Comparison with Observational Data
Abstract: We have developed a detailed model to understand how galaxies form in the framework of hierarchical theories of structure formation. Our model accounts for key processes like the formation and merging of dark matter halos, the heating and cooling of gas inside these halos, the regulation of star formation driven by energy from evolving stars and supernovae, galaxy mergers, and the changes in star populations over time. This approach is …
Published in International Journal of Universe · Vol. 1, Issue 1, 2025 · pp. 30–36 Read article