Search
34 articles for “coefficients of friction”
-
Evaluation of Fly Ash/ZrO2 Reinforced AZ91E Hybrid Composites Based on Wear and Friction Characteristics
Abstract: In the current study the compo-casting Al alloy MMCs' wear resistance was examined under a variety of abrasive circumstances, including coefficient friction, wear rate and it’s sliding distance. The AZ91E matrix composite was made by the liquid metallurgy process and reinforced with aluminum plated zirconium dioxide (ZrO2) particles. Designers examined the characteristics of matrix alloys along with created composites. friction and wear from dry sliding experiments had been performed on …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 324–338 Read article
-
Electro Less Duplex Nickel Coating and Tribological Characterization Under Elevated Temperature
Abstract: Electroless Ni-P (EN) coatings had previously demonstrated their ability to improve the tribological properties of the underlying substantial. This is due to its high hardness, fatigue strength, and chemical resistance. Nevertheless, the EN coverings' effectiveness at high temperatures, as well as their heat resistance, have yet to be evaluated. The current work investigates the tribological properties, namely friction and wear, of EN coatings at increased temperatures (100 ºC, 200 ºC, …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 12–17 Read article
-
Fabrication and Experimental Investigation on Mechanical Properties of Quartz Particulate Reinforced Aluminium Composite
Abstract: Composites are processed by adding a reinforcement phase in a base metal. The base material is known as a matrix and the constituent that is added is called reinforcement. The matrix acts as a support while the reinforcements attach themselves in their respective positions which results in the synthesis of a material which has different mechanical and thermal properties compared to their raw materials. Since aluminium is used as a …
Published in Journal of Production Research & Management · Vol. 14, Issue 3, 2024 Read article
-
Parameter Identification of Vibrating MIMO Mass-Spring-Damper Mechanical Systems with Coulomb Friction
Abstract: This study presents a time-domain method for identifying parameters in multi-degree-of-freedom (DOF) linear mass-spring-damper systems that include Coulomb friction, where the friction coefficient varies within a limited range, using measurements of position and control force. For mass identification in single-degree-of-freedom (DOF) vibrating mechanical systems with stiffness and no damping but Coulomb friction, the friction term is eliminated by first derivative processing. In addition, the identification of the coefficient of friction …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 20–34 Read article
-
Investigating the Role of Moisture in the Physical Properties of Harra (Terminalia chebula) Fruit
Abstract: Harra (Terminalia chebula) is known as the “king of medicines” in Ayurveda. Its fruits include astringent, purgative, antibacterial, antifungal, and laxative effects. The behavior of harra fruit is mainly dependent on the moisture present. It affects the harvest, post-harvest machinery, separation, packaging, and transportation of harra fruit. This study focused on T’s physical qualities of chebula fresh fruit at 20%–25% (wb) moisture content, such as 50 fruit mass, length, width, …
Published in Emerging Trends in Metabolites · Vol. 2, Issue 1, 2025 · pp. 11–19 Read article
-
Wear Performance of Cylindrical Shaped Alumina Nanoparticles Filled Epoxy Composite
Abstract: Low cost high specific strength epoxy LY 556 and alumina nano filler is utilized in current research for developing a epoxy composite. A liquid dispersion method was adopted for fabricating epoxy alumina composite having 0.50 wt% of alumina reinforcement. For uniform and homogenous dispersion of reinforcement, ultra-sonification of 120 W is adopted. To study the effect of particle behavior, unfilled epoxy and 0.5 wt.% cylindrical alumina oxide filled epoxy composite …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 94–100 Read article
-
A Review on Predicting Wear and Friction of PTFE Composites - Fillers to Machine Learning Models
Abstract: Polytetrafluoroethylene (PTFE) composites, a self-lubricating material with low friction, became an indispensable material in engineering applications where load carrying capacity and wear are crucial. The pure PTFE has poor mechanical strength and wear resistance which can be enhanced by the addition of fillers in appropriate volume fraction. The wear performance is dependent on various factors such as fillers, operating parameters, environmental conditions as well as manufacturing attributes. This makes the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 114–128 Read article
-
Experimental Assessment and Statistical Argument of Al-Si/CSA/MoS2 Hybrid Composites for Mechanical and Tribological Characteristics
Abstract: To augment the mechanical and tribological properties of Al-Si matrix composites complement with molybdenum disulphide (MoS₂) and coconut shell ash (CSA), a mixed experimental and Face-Centered Composite (FCC)strategy was employed. A liquid metallurgical method called stir casting was used to create hybrid composites with 5–15 wt.% CSA and 1–3 wt.% MoS₂. A FCC experimental design with thirty runs was used to thoroughly evaluate the materials. This design allowed for the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 792–802 Read article
-
Fabrication and Assessment of Tribological Performance of Nickel-Graphene-MXene Hybrid Nano-composites
Abstract: As industries such as aerospace, automotive, defence, and electronics demand materials with superior wear resistance, high strength, and thermal stability, traditional metals are reaching their performance limits. Hybrid nanocomposites offer a pathway to meet these stringent requirements. In this study, novel Nickel-Graphene-MXene hybrid nanocomposites were fabricated using a powder metallurgy route, incorporating varying weight percentages (up to 2 wt.%) of MXene and 1 wt.% graphene nanosheets into a nickel matrix …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 780–798 Read article
-
Enhancement of Thermo-hydraulic Properties of a Novel Composite-Based Spiral Fin Tube Heat Exchanger: An Experimental Investigation
Abstract: It is now crucial for engineers to enhance procedures and boost heat exchanger efficiency. Heat exchanger performance can be significantly enhanced by a variety of methods. Composite-based fins or enlarged surfaces are frequently utilized to increase the air-side heat transfer rate in a variety of heat transfer applications. Because composite materials are lightweight, highly thermally conductive, and resistant to corrosion, they were used. A composite based fin's efficiency is influenced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 238–251 Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Comprehensive Study on the Mechanical And Tribological Response of Waste Tyre Rubber–Natural Fiber Hybrid Epoxy Composites
Abstract: Research into the mechanical and tribological characteristics of Prosopis juliflora-fiber reinforced epoxy-matrix composites with recycled tyre rubber particles is the focus of this investigation. Making use of old tire rubber and bio-reinforcing with fibers from the common invasive plant Prosopis juliflora are the goals of the two-reinforcement technique. The end goal is to produce long-lasting, cost-effective engineered composite materials with improved performance. A constant epoxy resin matrix was used to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Development of a Novel Analytical Framework for Investigating Non-Symmetric Deformation Behavior in Strip Rolling
Abstract: In recent years, the asymmetrical rolling process has attracted considerable research attention due to its ability to induce non-uniform deformation characteristics within metallic workpieces. In this context, the present study introduces a novel analytical framework for asymmetrical cold rolling based on an enhanced slab method, specifically designed to overcome the inherent limitations of existing analytical models when applied to a wide range of asymmetric rolling conditions. A newly developed mathematical …
Published in Journal of Experimental & Applied Mechanics · Vol. 17, Issue 1, 2026 · pp. 1–21 Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
Effectiveness of PTFE-Based Nano-coatings in Improving Corrosion and Wear Resistance of Stainless Steel
Abstract: Polytetrafluoroethylene (PTFE) has emerged as a highly effective material for enhancing the durability and performance of metal surfaces, particularly in environments requiring superior corrosion resistance and low friction. This study investigates the application of PTFE coatings on various metallic substrates, with a focus on stainless steel and carbon steel, to improve their corrosion resistance, wear protection, and tribological performance. Utilizing advanced deposition techniques such as sol-gel and plasma spray, PTFE …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 2, Issue 2, 2024 · pp. 32–38 Read article
-
Coupled Magneto–Thermal–Diffusion Transport in an Unsteady Maxwell Polymer Fluid with Activation Energy over a Porous Stretching Surface
Abstract: The present study investigates the combined effects of activation energy and diffusion-thermo (Dufour) processes on unsteady magnetohydrodynamic (MHD) flow, heat, and mass transfer of a Maxwell viscoelastic fluid past a porous exponentially stretching vertical sheet. The electrically conducting and incompressible polymeric fluid flows through a saturated porous medium under a transverse magnetic field. The governing momentum, energy, and concentration equations are transformed into nonlinear ordinary differential equations using similarity transformations …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 581–590 Read article
-
Development of a Durable Superhydrophobic EP/PDMS Coating Reinforced with Micro-CaCO₃ and Nano-ZnO for Enhanced Corrosion Protection and Multifunctional Performance on Carbon Steel
Abstract: Balancing exceptional multifunctional performance with mechanical robustness in micro-nano composite films remains a significant challenge for practical applications. In this work, a superhydrophobic coating reinforced with micro-CaCO₃ and nano-ZnO particles was fabricated through a versatile single-step brushing method. The optimized EP/PDMS@micro-CaCO₃/nano-ZnO coating achieved a water contact angle (WCA) of 173.54° ± 2.53° and a sliding angle (SA) of 1.50° ± 1.12°. Owing to its carefully engineered micro-nano hierarchical structure, the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 216–238 Read article
-
Fractional Calculus-Based Analysis of Magneto-Thermal Nanofluid Flow Over Stretching and Shrinking Surfaces
Abstract: This study presents a comprehensive investigation of magneto-thermal hybrid nanofluid flow over stretching and shrinking surfaces using a fractional calculus framework to capture the memory and hereditary characteristics of complex fluid transport phenomena. The proposed model incorporates the effects of magnetic field intensity, thermal radiation, viscous dissipation, Brownian motion, and thermophoretic diffusion on the velocity and temperature distributions within the boundary layer region. A fractional-order derivative formulation is employed to …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 Read article
-
Finite Element Modelling of Contact Stresses in Helical Gear Systems
Abstract: Helical gears are widely used in modern power‐transmission systems because of their high load‐carrying capacity, smooth meshing action, and increased overlapping of gear teeth. However, the design of helical gear pairs is constrained by contact stresses generated at the mating tooth surfaces, which can lead to surface fatigue (pitting), micro-cracking, and ultimately gear failure. Traditional analytical methods, such as those of the American Gear Manufacturers Association (AGMA) or International Organization …
Published in Trends in Machine design · Vol. 12, Issue 3, 2025 · pp. 35–39 Read article
-
Experimental Investigation of Micro-Hardness & Tribological Behavior of Composite Coating for Wear Resistance Application
Abstract: The author effectively created a composite coating with enhanced durability utilizing the HVOF technique in this investigation. The automobile business has encountered fierce worldwide rivalry, rapid technical breakthroughs, and strict regulatory regulations in recent year.. Producers of lubricants, gasoline additives, and worldwide original equipment manufacturers (OEMs) are striving to address the difficulties presented by changing consumer preferences and emerging energy conservation and environmental protection regulations. We have successfully created and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1097–1103 Read article