Search
27 articles for “cementitious replacements”
-
Influence of Cementitious and Aggregate Replacements on the Compressive Strength of Pervious Concrete
Abstract: Pervious concrete is a sustainable construction material designed to enhance stormwater management while maintaining adequate mechanical strength. This study investigates the compressive strength of pervious concrete cubes with various cementitious and coarse aggregate replacements. The research examines the effects of fly ash, silica fume, steel slag, and rubber chips on compressive strength at 7 and 28 days of curing. The results indicate that moderate fly ash replacement enhances compressive strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 9–14 Read article
-
Evaluation of Compressive Strength of Concrete Using Fly Ash, Silica Fume, and Steel Slag as Cementitious and Aggregate Replacements
Abstract: This study comprehensively investigates the influence of supplementary cementitious materials and industrial by-products—specifically fly ash, silica fume, and steel slag—on the compressive strength of concrete. The primary objective is to evaluate the impact of both individual and combined replacements of cement and aggregate components on concrete performance. The research analyzes how varying proportions of these materials affect the strength characteristics of the concrete mixtures. Experimental results demonstrate that increasing the …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Review of Research on Pozzolanic Materials for Cement Blending and Concrete Applications
Abstract: The growing environmental concerns associated with cement production, particularly its high carbon footprint, have driven research into sustainable alternatives such as supplementary cementitious materials (SCMs) derived from agricultural and industrial waste. This study synthesizes findings from recent investigations into the pozzolanic potential of basil plant ash (BPA), rice husk ash (RHA), and stockpiled fly ash (FA), evaluating their processing methods, microstructural characteristics, and performance in concrete applications. BPA, being derived …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–6 Read article
-
Microstructure Analysis and Material Properties of Weld Slag as Fine Aggregate in Concrete
Abstract: To reduce the amount of river sand used, researchers and engineers have developed their own solutions. The well-known technique of submerged-arc welding can create high-quality welds in a variety of thicknesses for ferrous, stainless, and even some non-ferrous metals. The procedure involves an electric current flowing constantly between a welding wire and the work piece, creating an arc. In submerged arc welding, the shielding flux is transformed into slag during …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 13–18 Read article
-
Service Life Prediction of Concretes Incorporated with Fly Ash and Alccofine with respect to Chloride Ion Penetration
Abstract: Chloride-induced corrosion poses a significant threat to the degradation of reinforced concrete structures, especially in extreme environments such as marine and industrial exposure conditions, where the damage can be particularly severe. This study provides an experimental investigation utilizing three distinct water-binder ratios (0.3, 0.4, and 0.5) applied to three types of concrete mixtures: conventional concrete, concrete blended with 40% fly ash, and concrete blended with 40% fly ash and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 202–213 Read article
-
A Review on Sustainable Utilization of Dimensional Stone Waste as Construction Material
Abstract: The non-biodegradable nature of stone waste enhances the worldwide problem of disposal. A lack of land for waste landfills, increased transportation costs, and other related problems have compelled industries to look for alternative solutions. Depletion of natural resources has also been brought about by the construction industry's excessive use of resources like cement, river sand, and natural aggregates. As a result, the demand for sustainable and commercially feasible alternatives is …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 76–85 Read article
-
A systematic Review on Laterite based geopolymer
Abstract: Laterite based geopolymer has been widely studied as a sustainable alternative to Portland cement in construction industry. However, its thermal performance is still a challenge due to the low thermal conductivity and low temperature resistance. In this paper, recent studies on the improvement of thermal performance of laterite based geopolymer using additives are reviewed. The additives studied include organic materials, metal oxides and natural fillers. The effect of these additives …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 172–183 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article
-
Experimental Investigation on the Impact of Graphene on Fly Ash–Based Portland Pozzolana Cement Concrete
Abstract: This study presents a detailed investigation into the influence of incorporating phase change materials (PCMs) on the mechanical properties of cement mortar, with particular emphasis on compressive and flexural strength at various curing ages. Both organic and inorganic PCMs were utilized as partial replacements for cement at proportions of 5%, 10%, and 15% to evaluate their performance. The experimental results reveal a clear distinction in behavior between the two categories …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1865–1871 Read article
-
Enhancing Concrete Performance With GGBFS: An Analysis of Strength Characteristics at Various Replacement Levels
Abstract: This study investigates the effect of ground-granulated blast furnace slag (GGBFS) as a partial replacement for cement on the mechanical properties of concrete. The primary objective was to assess the compressive, flexural, and split tensile strengths, along with the modulus of elasticity, at different replacement levels of cement with GGBFS and at distinct curing ages of 7, 28, and 56 days. Concrete mixes were prepared by replacing cement with GGBFS …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 121–138 Read article
-
Sustainable Polymer-Based Cementitious Composites with Granite Dust as Fine Aggregate: Strength and Durability Evaluation
Abstract: This study investigates the potential for creating a new kind of cementitious composites that is obtained through the different compositions of rocks and chemicals in which granite dust that is helpful in resistance of chloride penetration and heat of hydration as a substitution with sand in composite. The primary goal of this study focuses on the effect of the stone waste like polymer matrix on evidence bases of researches for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 325–339 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
From Waste to Strength: Hybrid Binder Approach for Sustainable M25 Concrete
Abstract: The growing demand for concrete in infrastructure development has led to increased cement consumption, raising serious environmental concerns due to high energy use and carbon dioxide emissions correlated with cement manufacturing. In this context, the use of industrial residues as partial substitutions for cement has achieved deep focus as a sustainable construction strategy. The current investigations experimentally explore the strength and quality performance of concrete produced using a hybrid binder …
Published in Journal of Construction Engineering, Technology & Management · Vol. 16, Issue 1, 2026 · pp. 24–32 Read article
-
Performance Evaluation of Modified Concrete Incorporating Fly Ash, Silica Fume, Rice Husk Ash, and Calcium Nitrate
Abstract: The growing demand for sustainable and high-performance concrete has led to the incorporation of supplementary cementitious materials (SCMs) and chemical admixtures to enhance mechanical and durability properties. This study investigates the effect of 15% fly ash, 10% silica fume, 10% rice husk ash, and 3% calcium nitrate as a partial replacement for cement in M25 and M30 grade concrete. Experimental results demonstrate that the modified concrete exhibited an increase in …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 35–39 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Strength Prediction and Optimization of Portland Limestone Cement Blended with Metakaolin and Rice Husk Ash
Abstract: This study explores the effects of Rice Husk Ash (RHA) and Metakaolin (MK) on the compressive strength of Portland Limestone Cement (PLC) mortar, aiming to promote sustainable construction materials. RHA and MK, derived from agricultural and industrial byproducts, serve as supplementary cementitious materials (SCMs) that offer environmental benefits and improve cement properties. Using response surface methodology (RSM) and central composite design (CCD), the research optimized the ternary blend of PLC, …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 1–14 Read article