Search
23 articles for “boundary layer”
-
Atmospheric Boundary Layer Processes: Impacts on Weather Patterns and Climate Change
Abstract: The atmospheric boundary layer (ABL) is a vital component of the Earth's climate system, acting as the interface between the terrestrial surface and the overlying atmosphere. This layer, typically extending from the surface to a height of a few hundred meters, is characterized by strong gradients in meteorological variables such as temperature, humidity, wind speed, and atmospheric pressure. Understanding the dynamics of the ABL is essential for comprehending weather phenomena, …
Published in International Journal of Atmosphere · Vol. 1, Issue 2, 2024 · pp. 22–25 Read article
-
Integrating Atmospheric Science: Understanding Greenhouse Gases, Aerosols, and Air Quality Dynamics
Abstract: Atmospheric science investigates the Earth’s atmospheric systems to understand their composition, dynamics, and the implications for climate, weather, and air quality. This review explores five primary areas within the field: atmospheric composition, atmospheric modeling, remote sensing, air pollution, and boundary layer dynamics, highlighting critical challenges and advancements. Rising levels of greenhouse gases (GHGs), including carbon dioxide and methane, continue to drive global warming, while feedback mechanisms—like cloud interactions and surface …
Published in International Journal of Atmosphere · Vol. 1, Issue 1, 2024 · pp. 32–35 Read article
-
Aerodynamic Flow Separation Control Using Active Flow Devices
Abstract: Flow separation remains a significant challenge in aerodynamic applications, often leading to increased drag, loss of lift, and reduced efficiency in air and ground vehicles. This study investigates the use of active flow control (AFC) devices to mitigate flow separation and enhance aerodynamic performance. Active methods such as synthetic jets, plasma actuators, and pulsed blowing are examined for their ability to dynamically manipulate boundary layer behavior and delay or suppress …
Published in Journal of Aerospace Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 1–7 Read article
-
Effect of Leading-Edge Roughness on the Aerodynamic Characteristics of the Wind Turbine blade
Abstract: Leading-Edge Roughness (LER) strongly dictates boundary layer transition and performance degradation on an airfoil operating at transitional Reynolds numbers, an aerodynamic regime where shear-layer stability mechanisms remain highly complex. The wind tunnel experiments were conducted to investigate the aerodynamic impacts of surface roughness applied over 25% of the chord of a NACA 0018 airfoil using two discrete roughness gradations. Surface roughness induces an early boundary layer trip, causing elevated section …
Published in Journal of Aerospace Engineering & Technology · Vol. 16, Issue 2, 2026 Read article
-
Fractional Calculus-Based Analysis of Magneto-Thermal Nanofluid Flow Over Stretching and Shrinking Surfaces
Abstract: This study presents a comprehensive investigation of magneto-thermal hybrid nanofluid flow over stretching and shrinking surfaces using a fractional calculus framework to capture the memory and hereditary characteristics of complex fluid transport phenomena. The proposed model incorporates the effects of magnetic field intensity, thermal radiation, viscous dissipation, Brownian motion, and thermophoretic diffusion on the velocity and temperature distributions within the boundary layer region. A fractional-order derivative formulation is employed to …
Published in Recent Trends in Fluid Mechanics · Vol. 13, Issue 2, 2026 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Aerodynamic Analysis of Foliage Stimulated Airfoil Design for Enhanced Strength with Carbon Fibre-reinforced Polymer
Abstract: Ever since the beginning of aviation, there has been an unwavering desire to improve airfoil design in order to improve aircraft performance. This insatiable desire for improvement has driven innumerable aerodynamicists to create a diverse range of revolutionary airfoils. This research investigates a revolutionary method to airfoil design, inspired by the complicated structures and aerodynamic qualities of natural leaves. Using biomimicry, the project seeks to increase the performance and efficiency …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 560–616 Read article
-
Modeling and Simulation of Radiative MHD Casson-Type Polymer Composite Flow over a Porous Wedge with Variable Thermal Source and Sink
Abstract: This study presents a numerical investigation of the radiative magnetohydrodynamic (MHD) flow and heat transfer characteristics of a Casson-type polymer fluid over a moving and extending porous wedge under the influence of a spatially varying heat source and sink. The Casson fluid model, representing a class of viscoplastic polymeric materials, is analyzed within the MHD framework to explore the combined effects of magnetic field intensity, rheological behavior, and porous medium …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 837–850 Read article
-
Hybrid Numerical–Artificial Neural Network Study of Chemically Reactive MHD Nanofluid Flow Incorporating Thompson–Troian Slip and Stefan Blowing
Abstract: Boundary layer behaviour in chemically reactive nanoliquid is significantly affected by surface conditions, magnetic fields, heat and mas transfer mechanisms. However, the combined impact of Stefan blowing and nonlinear Thompson–Troian slip under inclined magnetic fields remains mostly unexplored, particularly in mixed convection flows. In this research work, the flow of a chemically reactive nanoliquid over a permeable surface is investigated by considering the Troian slip, inclined magnetic fields, Stefan blowing, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 409–425 Read article
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
The Onset of Rayleigh-Bénard-Marangoni Convection in a Ferromagnetic Fluid Layer
Abstract: This study examined the implications of magnetic boundary conditions, which are vertical in nature, on buoyancy and surface tension–driven ferrothermal convection (FTC) in a ferrofluid layer. While the upper surface is stress-free and susceptible to general thermal boundary issues, the bottom surface is stiff and insulating against temperature changes. The eigenvalue issue is solved analytically using the regular perturbation method and numerically using the Galerkin technique. According to analysis, raising …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 1–9 Read article
-
Refining Retinal Layer Segmentation in OCT Imaging with Advanced Techniques and Clinical Applications
Abstract: Segmenting retinal layers from Optical Coherence Tomography (OCT) pictures entails locating and separating different retinal layers to offer comprehensive anatomical and pathological information. Age-related macular degeneration, diabetic retinopathy, and glaucoma are among the retinal illnesses for which this procedure is crucial for diagnosis and follow-up. By utilizing preprocessing techniques to improve image quality and applying advanced algorithms—such as intensity-based, gradient-based, and texture-based methods—alongside deep learning approaches, clinicians can accurately measure …
Published in Trends in Opto-electro & Optical Communication · Vol. 14, Issue 2, 2024 · pp. 01–06 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Direct Synthetic Routes of MXenes and Their Application in Carbon Fiber Reinforced Plastics (CFRPs) As Supplementary Sizing Layer†
Abstract: Sized carbon fibers with a supplementary sizing layer of MXenes (synthesized via traditional MAX phases), bonded to carbon fibers (CFs) as well as the resin matrix via different kinds of physicochemical (van der Waals force, hydrogen bonding, covalent bonding) interactions enhanced the performance of the resulting carbon fiber reinforced plastic (CFRP) materials. This is because of the strong interface generated due to the appearance of MXene at the interface of …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 1, 2024 · pp. 07–13 Read article
-
Electrical Measurements on La-modified Four-Layered Aurivillius Ceramics
Abstract: Bismuth layered structure ferroelectric (BLSF) of Aurivillius family is found to be attractive owing to its scientific and technological point of view. These materials have potential ferroelectric applications owing to the fact of its high Curie temperature, high temperature piezo-devise and ferroelectric random access memory (FRAM), applications. In addition, Bi-modified compounds have shown improved ferroelectric properties. However, the plausible reason for improving ferroelectric properties in Bi-modified is still unclear. The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 157–170 Read article
-
Nanostructure-Induced Thermoelectric Enhancement in Bi₂Te₃ Nanorods Design, Analysis, and Performance Evaluation
Abstract: Thermoelectric materials capable of efficient energy conversion near room temperature are critical for waste heat recovery applications. In this work, solution-grown Bi₂Te₃ nanorods were synthesized via a trioctylphosphine-assisted thermal decomposition route, and the influence of surfactant-induced nanostructuring on their thermoelectric properties was systematically investigated. Structural analysis using X-ray diffraction and Rietveld refinement confirmed the formation of rhombohedral Bi₂Te₃ with the emergence of Bi₂Te₃–BiTe nanocomposites at higher surfactant concentrations. Electron microscopy …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 34–44 Read article
-
Influence of Horizontal Crossflow on the Rayleigh-Taylor Instability: A Numerical Approach
Abstract: Rayleigh-Taylor Instability (RTI) is a typical occurrence in natural events, engineering, and industrial applications. When the lighter fluid (bottom medium) is forcing the heavier fluid (top medium) on top of the lighter fluid because of a gravitational field, then that phenomenon is called Rayleigh-Taylor instability (RTI). Despite extensive records of investigating this common phenomenon i.e., RTI with several unique boundary conditions, apparently, there are no prior investigations for the RTI …
Published in Research & Reviews : Journal of Physics · Vol. 14, Issue 1, 2025 · pp. 1–11 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article