Search
17 articles for “band notch”
-
AI-Assisted Design of a Compact UWB Antenna with Tunable Band-Notch Characteristics
Abstract: Ultra-wideband antennas require wide impedance bandwidth while maintaining stable radiation characteristics and suppressing interference from coexisting narrowband wireless services. Conventional optimization of UWB antenna geometries generally requires repeated full-wave electromagnetic simulations, making parameter exploration computationally expensive. This paper proposes an artificial-intelligence-assisted methodology for designing a compact UWB monopole antenna with a tunable band-notch characteristic. The proposed antenna uses a microstrip-fed planar monopole printed on an FR-4 substrate, while a tunable …
Published in Journal of Microwave Engineering and Technologies · Vol. 13, Issue 2, 2026 Read article
-
Quad-Band Notched Small Monopole Antenna with U-shaped Slots and SRRs for UWB Applications
Abstract: A quad-band notched small monopole antenna with U-shaped slots and SRRs for UWB applications is presented in this study. The quadruple band-notched characteristics can be achieved by embedding three U-shaped slots on the radiation patch and two split ring resonators (SRRs) near feed line, respectively. It has a tiny size, only 17 mm23 mm0.508 mm. The experimental and measured results demonstrate that the proposed antenna offers an impedance bandwidth across …
Published in Journal of Communication Engineering & Systems · Vol. 15, Issue 1, 2025 · pp. 21–31 Read article
-
A Compact CPW-fed Quadruple-band-notched Antenna with Concentric Annular-rings for UWB Applications
Abstract: In this paper, a compact coplanar waveguide (CPW)-fed quadruple-band-notched antenna with concentric annular-rings for ultra-wideband (UWB) applications is presented. The proposed antenna consists of four concentric annular-ring resonators, a circular shape radiating element and a CPW feed line. The quadruple band rejection is easily achieved by controlling the widths and radii of four concentric annular-ring resonators. Through the exception of four stop-bands at 3.29 to 3.7 GHz, 5.07 to 5.92 …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 38–47 Read article
-
A Strip Feed Compact UWB Antenna with Triple Band Notched
Abstract: In this paper, a microstrip feed Ultrawide Band (UWB) antenna with triple notch band characteristic has been proposed. The proposed antenna has U-shaped stub on the radiating patch. The proposed antenna reduces the interference between UWB and WiMAX/WLAN/ITU. The propose antenna has a compact size of 26 x 27 mm2. The proposed antenna achieved an operating bandwidth (VSWR<2) from 2.68 to 12 GHz except notch band 3-3.85 GHz (WiMAX), 5-5.9 …
Published in Current Trends in Signal Processing · Vol. 7, Issue 1, 2017 · pp. 1–7 Read article
-
A CPW Feed Compact UWB Antenna with Five Band Notches
Abstract: AbstractA novel small CPW feed UWB antenna with five notch bands is projected to suppress the potential interferences in ultra-wideband systems. This projected antenna has a small dimension of 30x32x1.6 mm3 and an operating bandwidth (VSWR<2) from 2.8 to 11.6 GHz. By introducing five U-shaped slots, five notches are achieved in WiMAX (3.1–4 GHz), WLAN (5–5.4 GHz and 5.7–5.9 GHz), X-band downlink (7.2–7.75 GHz), and ITU service band (8–8.4 GHz). …
Published in Journal of Communication Engineering & Systems · Vol. 7, Issue 2, 2017 · pp. 27–33 Read article
-
A Quad-Element UWB-MIMO Triangular Monopole Antenna with Triple Band -Notch and High Isolation
Abstract: A quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation is proposed in this paper. The presented antenna consists of four triangular -shaped antenna elements, which are arranged in orthogonal orientation. This antenna is printed on low-cost FR-4 substrate with dielectric constant of 4.4 and its overall size is 50 × 50 × 1.6 mm3. Its operating frequency band is 2.97~11GHz. High isolation of 22dB between four …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 2, 2023 · pp. 30–37 Read article
-
Eye Shaped MIMO Antenna for Ultrawideband Applications
Abstract: AbstractA totally distinctive MIMO sharp band-notched antenna with high isolation for UWB applications is given. The antenna consists of two antenna elements with an overall space. A shaped stub is extruded among the bottom plane to enhance isolation associated with a shaped stub to introduce band-notched. The designed antenna possesses an occasional mutual coupling over the operative band. The performance of this antenna is studied in terms of isolation between …
Published in Journal of Telecommunication, Switching Systems and Networks · Vol. 5, Issue 2, 2018 · pp. 25–29 Read article
-
Analysis of a Dual Band Stacked Patch Antenna with Multiple Notches
Abstract: This paper presents the design and analysis of compact dual band stacked microstrip patch antenna for various applications. The designed antenna structure represents the dual frequency band operation and it covers the S band, frequency applications such as Wi-Fi, surface ship radar, weather radar, broadcasting in the range from 2.31GHz to 3.77GHz frequency band, radar, satellite based digital audio radio service (DARS) communication and some communication satellites. The parameters of …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 23–28 Read article
-
Design and Implementation of UWB-MIMO Triangular Antenna with Notch Technology
Abstract: The paper proposes a quad-element UWB-MIMO triangular monopole antenna with triple notched bands and high isolation. The antenna comprises four triangular-shaped elements arranged orthogonally, printed on a low-cost FR-4 substrate with a dielectric constant of 4.4. Its dimensions are 50 × 50 × 1.6 mm³, and it operates within the frequency band of 2.97 to 11 GHz. To achieve high isolation of 22 dB between the four radiatingelements, a square …
Published in Journal of Microwave Engineering and Technologies · Vol. 10, Issue 3, 2023 · pp. 8–15 Read article
-
Voltage Mode Second Order Multifunction Inverse Filter Using Single OTRA
Abstract: In this paper, a single operational transresistance amplifier (OTRA) based voltage mode single input single output (SISO) second order multifunction inverse filter configuration is proposed. The configuration offers an electronically tunable pole frequency and a quality factor of 1 which remains constant for any value of pole frequency. All the five inverse filters viz. inverse low-pass, inverse high-pass, inverse bandpass, inverse notch and inverse all-pass are realized from the same …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 2, 2017 · pp. 7–12 Read article
-
An Extended Semi-circular Microstrip Patch Antenna with DGS for UWB Applications
Abstract: This paper presents the design of a semicircular patch with an extended length for UWB applications. The proposed antenna is fabricated on FR4 substrate with relative permittivity of =4.4 and dimensions of 29.5x38x1.57 . The feed used in proposed design is 50 Ω microstrip feed line. The partial ground structure with a T-shaped slot and dual right angled isosceles triangular notches of side 3 mm each has been introduced to …
Published in Journal of Microwave Engineering and Technologies · Vol. 4, Issue 1, 2017 · pp. 13–18 Read article
-
Review Paper of Designing of CPW Fed Micro-strip Patch Antenna for UWB and Bluetooth Application
Abstract: A compact size coplanar waveguide (CPW)-fed micro strip antenna is proposed for radiation of the frequency spectrums 2.36 to 2.49 GHz (Bluetooth) and 3.1 to 10.6 GHz (UWB-Ultra wideband) covers. Both are unlicensed bands but in UWB band there are two licensed bands i.e. WLAN and Wi-MAX present in the frequency range of 5.12 to 5.825 GHz and 3.4 to 3.7 GHz respectively. In this design we have single CPW-fed …
Published in Journal of Microwave Engineering and Technologies · Vol. 3, Issue 1, 2016 · pp. 35–40 Read article
-
Realization of Fourth Order Multifunction Filters Using Operational Transresistance Amplifier
Abstract: Design of analog filters, using single Operational Transresistance Amplifier (OTRA) as the active current mode building block, is presented. Five types of filters have been designed namely Low Pass, High Pass, Band Pass, All pass, and Notch. The order of the proposed filters is four. The theoretical results are verified with PSPICE simulation using 0.5m CMOS process parameters provided by MOSIS (AGILENT). Frequency responses for the presented filters are shown …
Published in Journal of Electronic Design Technology · Vol. 3, Issue 1-3, 2012 · pp. 65–71 Read article
-
Effect of Notching on the Return loss of T-shaped Microstrip Patch Antenna for Wireless Communication System
Abstract: AbstractWith the loading of a pair of notches, a T-shaped slot and a pair of rectangular slots, novel bandwidth enhancement of microstrip antenna is demonstrated. The design is fed through a single coaxial probe. The proposed antenna is a modification of a simple T-shaped antenna which provides good radiating characteristics with enhanced bandwidth. The proposed antenna covers the S band and is used for many wireless applications. The proposed antenna …
Published in Trends in Opto-electro & Optical Communication · Vol. 7, Issue 2, 2017 · pp. 7–11 Read article
-
Design and Performance Analysis of a Compact Ultra-Wide Band Textile Antenna on Jeans Material and Bending Consequences
Abstract: This paper presents a novel design of a compact Ultra-wide band textile antenna which operates from the frequency range of 2.8–14 GHz, covering the entire ultra-wide band frequency range of 3.1–10.6 GHz, as approved by FCC. Hybrid design technique is applied to a simplified circular patch design and finally an octagonal shape is achieved that exhibits ultra-wide band characteristics. The substrate of the designed antenna is made of jeans fabric …
Published in Recent Trends in Electronics Communication Systems · Vol. 1, Issue 2, 2014 · pp. 1–8 Read article
-
Understanding the Delamination and Its Effect on Charpy Impact Energy in Thick Wall Linepipe Steel
Abstract: The thick wall linepipes produced from thermo-mechanical-controlled hot-rolled high-strength low-alloy steel (HSLA) plates are characterized by heterogeneity of microstructures through thickness. This microstructural heterogeneity results delamination and is responsible for substantial differences in the toughness behavior of the linepipe steel. The objective of this research work was to investigate these differences in impact energy using Charpy V-notch impact test in correlation with microscopic observations on fractured surfaces of the selected …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 1, 2014 · pp. 31–39 Read article
-
Enhancement of gain of multiband patch antenna
Abstract: In this paper we discuss about the multi notch multi polarization antenna for wireless communication, form some previous time there are various researches are to be performed in the field of multi notch and multi polarization, there are various application are being developed on the basis of this which are notch antenna, multiple polarization and the circular polarization antenna which is being widely used in the satellite communication, in this …
Published in Journal of Advances in Shell Programming · Vol. 5, Issue 2, 2018 · pp. 7–11 Read article