Search
56 articles for “aqueous solutions”
-
Adsorption of Congo Red Dye in Aqueous Solution using Moringa oleifera Seed Powder
Abstract: The feasibility of using Moringa oleifera seed for the Congo red adsorption from aqueous solution has been investigated as a low cost and an eco-friendly adsorbent. Adsorption studies were conducted on a batch process, to study the effects of contact time, initial dye concentration and adsorbent dosage. Maximum colour removal was observed at higher adsorbent dosage. The present dye removal decreased from 95% to 81% as the dye concentration has …
Published in Journal of Catalyst & Catalysis · Vol. 8, Issue 1, 2021 · pp. 8–18 Read article
-
Using of the sea grasses for the removal of some industrial organic dyes; bromo cresol purple from aqueous solutions
Abstract: Abstract: The objectives of this study are evaluating the efficiency of low cost adsorbents of activated carbon obtained from sea grasses. Using the sea grasses for the removal of some industrial organic dye; bromo cresol purple indicators from aqueous solutions and studying the impact of some of the factors including different dosages , pH, different concentrations, different temperature and effect of time of adsorbed materials. Adsorption efficiency of dye onto …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 3, 2019 · pp. 29–36 Read article
-
Effect of the U.V. Irradiation on the Aqueous Solution of Dye (i.e. Cresol Purple)
Abstract: This study aimed to estimate the effect of the U.V. irradiation on the aqueous solution of cresol purple. Then study the effect of the activation energy of each electron transfere on the absorbance and λmax values. The absorbance and λmax values of the selective λmax solutions were chanced in most solutions, where the U.V radiation gave different values at different irradiation periods, most of solution gave low values of absorbance …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 1, 2021 · pp. 30–35 Read article
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Facile Fabrication and Characterization of Novel Sterculia Gum–graft-poly(n-isopropylacrylamide-co-acrylamide) Hydrogel for Efficient Removal of Cationic Dyes from Aqueous Solution
Abstract: Water is indispensable component of life. Contamination of water is a severe problem that affects human health, aquatic vegetation, and fauna. Aside from various effluents, a variety of cationic dyes generated by industrial effluents contributes significantly to water contamination. In this study, a sterculia gum graft-poly(n-isopropylacrylamide-co-acrylamide) hydrogel was made using a graft copolymerization technique with N,N′-methylene-bis-acrylamide as a crosslinker, ammonium persulphate as an initiator, and tetramethylethylenediamine as an accelerator to …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 29–59 Read article
-
Utilization of Sugarcane Bagasse as Biopolymer Adsorbent for Arsenic (III) Removal from Aqueous Solutions
Abstract: The present study focuses on the removal of the heavy metal As(III) from aqueous solutions using the low cost adsorbent, sugarcane bagasse. The effect of contact time (10, 20, 30, 40, 50, 60, 70, 80, 90 min), adsorbent dosage (0, 0.25, 0.5, 0.75, 1 gm) and metal concentrations (0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10 ppm) on the adsorption were studied and the optimum conditions were …
Published in Journal of Polymer & Composites · Vol. 9, Issue 2, 2021 · pp. 30–44 Read article
-
Adsorption of Methylene Blue Dye from Aqueous Solution Using Polyaniline/Xanthan Gum Nanocomposite: Kinetic and Isotherm Studies
Abstract: ABSTRACTIn the present study, adsorptive properties of polyaniline/xanthan gum nanocomposite were investigated for methylene blue (MB) dye in aqueous solution. The effects of different parameters, namely adsorption time, adsorbent dose, pH and initial dye concentration were on dye adsorption were investigated. The results revealed that a rise se in pH lead to a significant increase in adsorption efficiency. Optimum adsorption time and nanocomposite dose were obtained 60 min and 0.075 …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 17–26 Read article
-
Improved Photocatalytic Activity for Removal of Methylene Blue Dye from Aqueous Solutions with La2O3-Modified Ceria Heterostructured Binary Oxide Nanocomposite Particles
Abstract: The current study aimed to examine the photocatalytic efficacy of a bimetallic CeO2-La2O3 hetero-NC in comparison to monometallic CeO2 and La2O3 nanoparticles (NPs), utilizing Methylene Blue (MB)as pollutant sample under natural solar and UV irradiation. The coprecipitation method was utilized to produce a bimetallic CeO2-La2O3 hetero-NC. Following this, the nanostructures underwent characterization through various techniques including FT-IR, FE-SEM, XRD, UV Vis- DRS, Raman, and Photoluminescence spectroscopy. The catalytic activity of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 514–532 Read article
-
Biosorption of Fluoride from Aqueous Solution Using Ulva fasciata sp.: A Marine Green Algae
Abstract: Water is a useful and vital natural resource for sustaining life and environment that we have always thought to be available in abundance and free gift of nature. Enhanced industrial activity during recent decades has led to the discharge of unprecedented volumes of industrial waste water, which is a serious cause of environmental degradation. Excessive fluoride concentrations have been reported in ground waters of more than 20 developed and developing …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 45–53 Read article
-
Removal of Cadmium from Aqueous Solution by Modified Sawdust as Adsorbent
Abstract: The study was carried out to determine the percentage removal efficiency of heavy metal like cadmium by using the modified form of sawdust as an adsorbent. Cadmium is highly toxic to human, plant and all living organism present in the environment. It was found that the chemically treated sawdust is a better adsorbent as compare to the untreated form of sawdust. After treating the sawdust with sodium hydroxide (NaOH), it …
Published in Emerging Trends in Chemical Engineering · Vol. 2, Issue 2, 2015 · pp. 22–24 Read article
-
Polymer Based Optoelectronics in Clinical Application Treated with Sodium Fluoride and Aqueous Dimethyl Sulfoxide Solutions
Abstract: In polymer science, dimethyl sulfoxide (DMSO) and sodium fluoride (NaF) are frequently combined to dissolve, modify, or treat particular polymers, most notably in the processing of cellulose and the creation of polyvinylidene fluoride (PVDF) membranes. The viscosities, ultrasonic velocities, and sodium fluoride densities of aqueous solutions of dimethyl sulfoxide (DMSO) have been measured at T=303.15, 308.15, 313.15, and 318.15 K. Fluorides (such as NaF or TBAF) help break inter-chain hydrogen …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 20–29 Read article
-
The Developed System of Continuous Utilization of Carbon Dioxide, Enrichment of the Atmosphere with Oxygen and Production of Biofuel Using the Resulting Concentrate of Rapidly Multiplying Microalgae
Abstract: It is known that microorganisms, such as microalgae, during photosynthesis utilize carbon dioxide and enrich the atmosphere with oxygen. Microalgae, on the other hand, can be converted into biofuels by extracting fatty acids from macromolecules known as lipids. Recovery of this fatty acid traditionally requires the removal of most of the water from the microalgae resulting in biomass slurry. The method developed earlier permitted to obtain a high-quality concentrate of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 13, Issue 2, 2022 · pp. 10–20 Read article
-
Hydrogen and oxygen generation by Photoelectrolysis and Special Constructed Photoelectrolyzer Powered by Light Energy for Hydrogen Electric Vehicle Charging
Abstract: Today, pure hydrogen is produced by various industrial methods, including: steam reforming of methane and natural gas; coal gasification; biotechnology; electrolysis of water, etc. The most effective method for obtaining pure hydrogen is the use of photoelectrolysis of an aqueous solution of an electrolyte, flowing in a photoelectrochemical cell. In this method, the hydrogen in the photoelectrochemical cell is produced directly from solar energy. In a photoelectrochemical cell, a silicon …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 38–46 Read article
-
Optimization Study on Cr (VI) Removal by Response Surface Methodology using Artemia franciscana
Abstract: Response Surface Methodology was employed in the present investigation to obtain the optimized physical condition for the removal of Cr (VI) from the aqueous solution. The pH was varied from 8–12 and the salinity from 30–50‰. The pH of 10 and salinity 40‰ was found to be optimized physical condition for the 95% of Cr (VI) removal from the aqueous solution using Artemia franciscana by the process of bioaccumulation. Keywords: …
Published in Research and Reviews : Journal of Computational Biology · Vol. 7, Issue 1, 2018 · pp. 15–21 Read article
-
A new method of phytoplankton concentration as a cycle of solving environmental problems and obtaining energy from high-quality biofuel (lipid oil)
Abstract: The stagnant zones of fresh lakes, formed due to increased reproduction of phytoplankton in stagnant water under the influence of the sun, pose a serious threat to the environment, leading to the death of phytoplankton and fish, releasing hydrogen sulfide and making the water unsuitable even for agricultural use. In this regard, the development of a method for concentrating phytoplankton from "green water" becomes an urgent task associated not only …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 12, Issue 2, 2022 · pp. 55–61 Read article
-
Chlorella lipid oil for biofuel production obtained by a new method of high quality concentration of Chlorella
Abstract: Chlorella concentrates are unique due to the large amount of high-quality lipid oil produced from them, which is a high-quality biofuel. The production of high quality lipid oil requires the production of Chlorella concentrates with low water content (as a foam product). Existing methods of centrifugation or microfiltration for the concentration of chlorella are expensive andineffective. The article presents a new developed method for obtaining high-quality lipid oil, in which …
Published in Journal of Petroleum Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–14 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
A New Developed Photoelectrochemical Cell for Hydrogen Generation
Abstract: There are many methods for the industrial production of hydrogen, including: steam reforming of methane and natural gas; coal gasification; biotechnology; electrolysis of water, etc. The most effective method of obtaining of pure hydrogen is the use of photoelectrochemical cell. Photoelectrochemical cells produces hydrogen directly from solar energy. In a photoelectrochemical cell, a silicon semiconductor with an anode attached to it, immersed in an aqueous electrolyte solution and excited by …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 1, 2023 · pp. 01–10 Read article
-
HYDROTROPES IN SOAP FLOTATION: A CRITICAL REVIEW
Abstract: In this study efficiency of soap flotation when the hydrotrope was used along with the flotation reagents especially collectors for different type of minerals is reviewed. It is known that for flotation of salt type minerals soaps are used as collectors. The soap collectors when used along with hydrotropes as promoters in flotation yielded better flotation efficiency along with the reduced usage of collectors (soaps). Hydrotropes the compounds that soulibilises …
Published in Emerging Trends in Chemical Engineering · Vol. 5, Issue 2, 2018 · pp. 5–10 Read article
-
Diaminoglyoxime Palladium (II) Chloride As An Efficient Catalyst for the Suzuki-Miyaura Cross-Coupling Reaction under Aerobic Conditions in H2O/EtOH Solution
Abstract: The preparation of diaminoglyoxime palladium (II) chloride (PdCl2/DAG complex) and the use of this catalytic system in Suzuki-Miyaura cross-coupling reactions under aerobic and phosphine-free conditions in aqueous solutions is studied. Aryl halides, coupled with phenylboronic acids smoothly afford the corresponding cross-coupling products with excellent yields (80–98%). The catalytic system showed excellent performance for the Suzuki-Miyaura cross-coupling reaction of less reactive aryl chlorides with aryl boronic acids. The reaction conditions have …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 2, 2014 · pp. 35–43 Read article