Search
40 articles for “anodic)”
-
Enhancement of Electrical Conductivity of Laterite Derived Ferric Oxide to Facilitate As Anode Materials
Abstract: Laterite is a mineral abundant in ferric oxide and various impurities, including aluminum oxide and silicon dioxide. The extraction of ferric oxide from laterite is accomplished through a cost-effective leaching process employing HCl, NaOH, and Sodium dodecyl sulfate (SDS). Characterization using Xray diffraction (XRD) confirmed the synthesized particles to be α-Hematite nano particles, with an average particle size of 94.21 nm, predominantly falling within the range of 90 nm to …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 3, 2023 · pp. 1–11 Read article
-
Pore Distributions in Porous Anodic Aluminum Oxide (PAAO) Surfaces of Pure and Commercial Aluminum Substrates
Abstract: Porous anodic aluminum oxide (PAAO) surfaces were developed on pure aluminum (PA) and commercial aluminum (CA) substrates by anodization as a function of voltage in phosphoric acid bath at 278 K and were analyzed by scanning electron microscopy. The interpore distances were plotted in the form of frequency histograms to examine pore-ordering characteristics. Self-ordered porous structures have been obtained at 200 and 160 V for PA and CA substrates respectively …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 143–153 Read article
-
Investigating the effect of Anodes workfunction on the Opto-electronics Performance of Organic Light Emitting Diode
Abstract: The research aims to assess the performance of organic light-emitting diodes (OLEDs) by exploring how various anode materials affect their optoelectronic properties. OLEDs are crucial for modern displays and lighting, and their efficiency and functionality are heavily influenced by the materials used in their design.This study examines four different anode materials: Indium Tin Oxide (ITO), Zinc Oxide (ZnO), Aluminum-doped Zinc Oxide (AZO), and Poly(3,4-ethylenedioxythiophene) Polystyrene Sulfonate (PEDOT: PSS). These materials …
Published in Research & Reviews : Journal of Physics · Vol. 13, Issue 2, 2024 · pp. 27–37 Read article
-
Power Generation from Kitchen and Industrial Waste Water using Microbial Fuel Cells (MFCs) with Graphite Cathode and Anode
Abstract: Degradation of fossil fuels and increased accumulation of waste water has become the major issue in the world over decades. Microbial fuel cells are one such advancement that makes use of renewable waste sources like dhobi ghats, pond water, domestic kitchen waste water and industrial waste water; and directly convert it into electricity. Microbial fuel cells are electrochemical cells that directly convert chemical energy into electrical energy using microorganisms as …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 7, Issue 1, 2016 · pp. 14–22 Read article
-
Carbon-Coated Te-Doped Bi₂Se₃ as a Topological Quantum Anode Material for Sodium-Ion Batteries
Abstract: Sodium-ion batteries (SIBs) are increasingly investigated as cost-effective alternatives to lithium-ion systems for large-scale energy storage; however, the development of stable and conductive anode materials remains a major challenge. In this work, tellurium-doped bismuth selenide (Te-doped Bi₂Se₃) was synthesized and further modified with Super P conductive carbon to improve its sodium-storage behavior. The phase formation and structural retention of the active material were examined using X-ray diffraction, while elemental mapping …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 57–63 Read article
-
H2 Production by Methanol Steam Reforming over Copper Impregnated Anodized Aluminum Oxide (AAO)
Abstract: Hydrogen production by methanol steam reforming (MSR) is easy and simple as compared to other reforming methods using fossil fuels such as methane steam reforming. The catalysts for MSR are well developed and available commercially. When constructing a small or micro reformer, the catalyst often needs to be coated on the wall of the metal substrate. In this case, the bonding between the metal surface and the catalyst layer must …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 1, 2014 · pp. 23–28 Read article
-
Anodic Polarization Study on Steel Bar in Concrete Powder Solution Extracts Contaminated with Chloride and Sulfate Salts
Abstract: In present work, anodic polarization tests are conducted on different steel specimens to find out corrosion zone potentials of various corrosion zones. The tests are done in the concrete powder solution extracts contaminated with the varying levels of admixed chloride and sulfate salts, at varying w/c ratios and cement types. The admixed chloride content is fixed at 3.5% and the sulfate content is used as 0, 2.5 and 5%, by …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 22–28 Read article
-
Purification of industrial wastewater using a photoelectroflotation process powered by solar energy
Abstract: The main problem of all existing electroflotation methods of wastewater treatment is salinization of the near-anode space during electroflotation, which leads to the formation of salt deposits on the anode, which strongly cover the anode surface, which can lead to a complete stop of the electroflotation process. The anode, used by electroflotation devices has a dense grid of small cells, which, on the one hand, increases the current density, but, …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 1, 2023 · pp. 36–53 Read article
-
Assessment of Carbon Fibre (CF) and Carbon Nanotube (CNT) as Supercapacitor Electrode on Surface Activated Nickel Foam
Abstract: In present paper, an attempt has been made to compare the potential of two different carbon-based materials, Carbon Fibre (CF) and Carbon Nanotubes (CNT), as electrode materials. These two materials are compared against each other in terms of their dimensions, volume of deposition on Nickel foam and their performance under Cyclic Voltammetry (CV). It was observed that owing to the dimensions of the depositing material, CNT (nano-sized carbon) electrode reflected …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 2, 2023 · pp. 10–14 Read article
-
Review of Nitrite Inhibitor for Protection of Rebar Corrosion
Abstract: Load bearing concrete structures need steel reinforcement (rebar) strips or rods, which are prone to attack by the corrosive environment inside the concrete due to constant ingress of moisture, pollutant gases and anions (mainly Cl-, SO4- -). One of the means of reducing such type of corrosion is the use of inhibitors. Inhibitors are water soluble but film forming on metals by their selective adsorption on the metal surface. These …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 42–56 Read article
-
A New Developed Photoelectrochemical Cell for Hydrogen Generation
Abstract: There are many methods for the industrial production of hydrogen, including: steam reforming of methane and natural gas; coal gasification; biotechnology; electrolysis of water, etc. The most effective method of obtaining of pure hydrogen is the use of photoelectrochemical cell. Photoelectrochemical cells produces hydrogen directly from solar energy. In a photoelectrochemical cell, a silicon semiconductor with an anode attached to it, immersed in an aqueous electrolyte solution and excited by …
Published in International Journal of Photochemistry and Photochemical Research · Vol. 1, Issue 1, 2023 · pp. 01–10 Read article
-
Hydrogen and oxygen generation by Photoelectrolysis and Special Constructed Photoelectrolyzer Powered by Light Energy for Hydrogen Electric Vehicle Charging
Abstract: Today, pure hydrogen is produced by various industrial methods, including: steam reforming of methane and natural gas; coal gasification; biotechnology; electrolysis of water, etc. The most effective method for obtaining pure hydrogen is the use of photoelectrolysis of an aqueous solution of an electrolyte, flowing in a photoelectrochemical cell. In this method, the hydrogen in the photoelectrochemical cell is produced directly from solar energy. In a photoelectrochemical cell, a silicon …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 14, Issue 1, 2024 · pp. 38–46 Read article
-
Acetoxylation of o, m Cresol by Electrochemical Process at Graphite Electrode
Abstract: Electrochemical processes remain unique because of the nature of specific products formed and their mode of formation in which current is a reactive input in place of redox reagents. The high yields of the products can be obtained by designing and optimizing the electrolysis. The ordinary chemical procedures are multi-staged and may result poor yields. Therefore the best way for minimizing the pollution is transformation of conventional chemical processes to …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 3, 2021 · pp. 13–21 Read article
-
Electrooxidation of Methylene Blue over nanoparticle coated DSA synthesized by sol-gel method
Abstract: The current study uses the sol-gel approach to synthesize a new Dimensionally Stable Anode (DSA) covered with nanoparticles. The objective is to enhance the electrocatalytic activity and overall performance of the anodes in treating synthetic industrial wastewater containing reactive dyes. CuO and TiO2 nanoparticles are coated using a thermal decomposition technique on a titanium electrode. The DSA surface gains more surface area and better catalytic capabilities when nanoparticles are coated …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 34–43 Read article
-
Na-Air Battery: The Battery of the Future—A Review
Abstract: Metal-ion batteries came into the limelight with the invention of Zn-ion battery as early as 1878, but its commercial viability came into picture in 1990 and lithium-ion cell in 1977. Since then, a number of metals have been experimented upon and similar rechargeable secondary storage batteries like Al-ion, Na-ion, Sn-ion, Mg-ion, K-ion have been developed. In this type of battery, electrochemical dynamics involves the movement of only one kind of …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 15, Issue 3, 2024 · pp. 1–19 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Simple Gain Model of Group III-V Semiconductor-based Laser Diode
Abstract: In these days, a layer of low bandgap material is sandwiched between two high bandgap layers.Most commonly-used pair of materials is gallium arsenide (GaAs) with aluminium galliumarsenide (AlGaAs) and Indium Phosphide (InP) with Indium gallium arsenide phosphide(InGaAsP) laser. A heterostructure is the junctions between different bandgap materials. Here,two such junctions are present, hence it is called the name "double heterostructure laser" orDH laser. The kind of laser diode may be …
Published in Recent Trends in Electronics Communication Systems · Vol. 7, Issue 3, 2020 · pp. 9–27 Read article
-
Two-chamber Medical Electroflotator for Cleaning of the Lymph of Cancer Patients from Toxic Substances and for the Destruction and Removal of Cancer Cells Contained in It
Abstract: Existing devices for cleaning of the lymph of patients with liver cirrhosis or hepatitis from a high concentration of toxic substances, contained in it, do not allow cleaning the body of patients from these toxic substances. In addition, these devices require the patient's lymph to be purified in a discrete mode, i.e., all the patient's lymph, without which the patient remains, is purified for a sufficiently long time, and after …
Published in Research and Reviews: Journal of Oncology and Hematology · Vol. 11, Issue 1, 2022 · pp. 21–27 Read article
-
Aluminum based types of hydrophobic coatings for Engineering Materials: A Review
Abstract: Today's coating applications allow for the employment of a wide range of techniques and substances to safeguard products and structures from chemical and chemical harm. Coatings are now widely utilized in manufacturing across the globe to boost productivity and cut costs, both of which are crucial for maintaining the industry's profitability. Materials with coatings are stronger than those without coatings. Strong and hard metals, ceramics, bioglass, polymers, and plastic materials …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 113–133 Read article
-
Utilizing Chemical Machining Methods in the Metalworking Sector
Abstract: Chemical machining is a kind of material removal technique used to produce desired shapes and dimensions by selectively or completely removing material through carefully regulated chemical attack using etchant solutions, which are solutions of acids or alkalis. One type of chemical machining is chemical milling, also known as contour machining, etching, or chemiluminescence. The aerospace industry uses chemical milling to remove thin layers of material from extruded parts for aircraft …
Published in International Journal of Manufacturing and Production Engineering · Vol. 2, Issue 1, 2024 · pp. 17–23 Read article