Search
21 articles for “and GGBS”
-
Development and Performance Evaluation of Polymer-Modified Geopolymer Composites Incorporating GGBS
Abstract: This research investigates the development and performance of geopolymer-based composite materials formulated using Ground Granulated Blast Furnace Slag (GGBS) as a reactive mineral component within an aluminosilicate polymer matrix. The study aims to create an eco-efficient and structurally sound inorganic polymer composite comparable to M35-grade concrete, produced entirely under ambient curing conditions. A series of mixes with varying GGBS replacement ratios (0–100%) was prepared, maintaining a constant binder content of …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1145–1165 Read article
-
Investigation of Sulphate, Alkali and Carbonation Chemical attack in GGBS-Based Geopolymer Concrete and OPC Concrete
Abstract: This study presents a comparative evaluation of the durability of GGBFS-based Geopolymer Concrete (GPC) and OPC concrete in rapid carbonation, sulphate, and alkali environments. All samples were subjected to three severe conditions are carbonation at 4% CO₂, 25°C and 60% relative humidity, exposure to a 10% sodium sulphate (Na₂SO₄) solution, and immersion in a 10% sodium hydroxide (NaOH) solution for alkali resistance. The durability characteristics were evaluated by the compressive …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 13–35 Read article
-
Physical and Mechanical Properties of GGBS Based Geopolymer Concrete with the Inclusion of Metakaolin
Abstract: The use of ecologically friendly materials in the production of concrete is a significant and pertinent development in the global movement for sustainable construction. Geopolymer concrete (GPC) has gained popularity as an alternative to conventional Portland cement (OPC)-based concrete due to its utilisation of ground granulated blast furnace slag (GGBS), fly ash, and metakaolin, among other industrial by-products. The production of geopolymer concrete addresses serious environmental problems and contributes to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 261–266 Read article
-
Hybrid Polymer Composites Containing GGBS and Copper Slag: A Review of Mechanical Behavior and Interfacial Mechanisms
Abstract: Over the past few years, there has been a push to seek sustainable solutions through material science in the field of industrial by-products that can be used in polymer composite systems. Two such substances are ground granulated blast furnace slag (GGBS) and copper slag that have demonstrated a promising potential because of their abundance and useful physical and chemical properties.This review is dedicated to the application of GGBS and copper …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
A Study on Improving CBR Value by using EPE foam in Addition to GGBS Slag for Subgrade Soil
Abstract: This paper identifies the use of industrial by-product Ground Granulated Blast Furnace Slag (GGBS) as a stabilizing agent in expansive soil with high swelling property causing severe damage to buildings built on it, and this study identifies the optimal percentage of GGBS for increasing the strength of clayey soil. Using GGBS slag to improve the CBR value of subgrade soil can have potential benefits. Ground Granulated Blast Furnace Slag (GGBS) …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 3, 2024 · pp. 1–23 Read article
-
Investigation on the mechanical characteristics and productivity of GGBS based geopolymer mortars
Abstract: It has been known for decades that geopolymer will significantly replace cement's function in construction industry. Geopolymer has low creep and shrinkage and a peak compressive strength. That is as per a recent study, geopolymer mortar is made by Fly ash and GGBS. The composition includes (100-60%) GGBS with a 10% substitution of fly ash. Alkali activators used in the research are sodium hydroxide (NaOH) and sodium silicate (Na2SiO3). In …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 253–264 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Experimental Study and Comparative Analysis of Fly Ash, GGBS, and Silica Fume in Nominal Concrete and Ternary Blended M25 Concrete
Abstract: This study examines the effects of partially substituting 30% of cement by weight with ternary supplemental cementitious materials (TSCMs) with mix proportions of M1, M2, and M3. These materials include fly ash (10%,15%,15% in M1, M2, and M3), ground granulated blast furnace slag (GGBS) (10%,8%,10% in M1, M2, and M3), and silica fume SF (15%,10%,5% in M1, M2, and M3) on the mechanical and durability properties of M25 grade concrete …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 43–50 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
Service Life Prediction of Concretes Incorporated with Ground Granulated Blast Furnace Slag and Icrete with respect to Chloride Ion Penetration
Abstract: The reduced service life of concrete structures in coastal or de-icing salt conditions is commonly attributed to corrosion generated by chloride. Therefore, extensive research is being conducted to estimate the time taken for threshold chloride ions to reach the reinforcement and break the protective layer, initiating the corrosive process. This study conducted an experimental investigation on controlled concrete, concrete incorporating 50% GGBS, and concrete incorporating both 50% GGBS and 2% …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 214–226 Read article
-
Mix Proportioning of Biochar as a Partial Replacement of Cement Using Alkaline Activators in Concrete Composite
Abstract: The growth of the world population has led to a heightened need for housing, making construction a crucial sector. Cement, a critical element in concrete mixtures, is indispensable in construction activities. Yet, the diminishing reserves of natural resources such as limestone and rocks, essential for cement manufacturing, necessitate sustainable options. This research investigates the creation of sustainable concrete blends by incorporating biochar and ground granulated blast furnace slag (GGBS), activated …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 628–639 Read article
-
Sustainability and Mechanical Performance Evaluation of Cementitious Composites Reinforced with Waste Rubber Aggregates and Ground Granulated Blast Furnace Slag
Abstract: The development of environmentally responsible composite materials has gained global momentum with the shift toward circular and sustainable construction practices. In this work, the performance of cementitious composites that partially substitute natural fine and coarse aggregates with recycled rubber aggregates from end-of-life tires and Ground Granulated Blast Furnace Slag (GGBS) as an additional cementitious material is examined. A total of thirty composite mixes were formulated by varying GGBS (10–30%) and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1164–1180 Read article
-
Exploring High-Strength Self-Compacting Concrete: An Investigative Study
Abstract: Presently, Self-Compacting Concrete (SCC) emerges as a cutting-edge variant within the concrete landscape. This type of concrete opens a new horizon in construction industries, as the concrete may flow on its own weight and does not require external vibration for compaction. For this reason, it reduces the labor costs, energy, and time required for placement It has the capability to smoothly spread into the intricate spaces of the formwork and …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 20–28 Read article
-
Influence of Supplementary Cementitious Materials on Chemical Shrinkage in Cement
Abstract: Chemical shrinkage is the volume reduction observed in cement during early hydration due to chemical reactions, which critically influences the internal stresses, cracking tendencies, and durability of cementitious system. Present study is focused on effect of supplementary cementitious material (SCM) on chemical shrinkage. Dilatometry method is used to assess the impacts of SCMs on chemical shrinkage, in this this study. The research incorporates experiments with laboratory-synthesized cement and three SCMs—fly …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 98–107 Read article
-
Revolutionizing Geopolymer Composites: Unveiling Intelligent Wall Facades and Precision PZT Sensors for Vibration Analysis
Abstract: Evaluating the mechanical performance and environmental benefits of geopolymer composites is imperative for sustainable alternatives in construction. This study presents an innovative circular PZT-based sensor that effectively captures transient vibrations within concrete structures, demonstrating its validity in comparison to standard surface-mounted accelerometers. The research also elucidates the influence of sensor orientation on capturing various vibrational modes of concrete. Furthermore, the embedded PZT sensors provide valuable insights into the evolving mechanical …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 59–73 Read article
-
Geopolymer Concrete Composites and its Properties- A Clean and Sustainable Development
Abstract: Production of geopolymer composites, an inventive and environmentally friendly substitute for regular Portland cement concrete, involves the polymerization of several industrial waste materials, including fly ash, powdered granulated blast furnace slag, silica fume, and rice husk ash, using solutions that are very alkaline. Because this technique removes the requirement for calcination, which is a significant contributor of CO2 emissions during the manufacturing of OPC, GPC is more ecologically friendly. Alkaline …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 284–300 Read article
-
Experimental Investigation on Strength and Durability Properties of Slag Based Alkali Activated Concrete Incorporating Fly Ash
Abstract: To minimize carbon emissions during cement production and to resolve landfill issues arising from industrial waste, the adoption of alkali-activated concrete (AAC) incorporating various by-products from industry has become increasingly popular as environmentally friendly option to conventional concrete in the construction sector. This study focused on strength and durability of AAC by utilizing waste industrial by-products such as ground granulated blast furnace slag (GGBS) and fly ash (FA) at ambient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 393–400 Read article
-
Development and Characterization of Bottom Ash–Fly Ash–GGBS-Based Geopolymer Composites for Sustainable Applications
Abstract: The growing demand for sustainable construction materials has spotlighted geopolymer concrete (GPC) as an environmentally viable substitute for conventional cement-based systems. This study presents an innovative dual-waste valorization approach, integrating pulverized bottom ash (BA) and ground granulated blast furnace slag (GGBS) as binders while replacing sodium silicate (Na₂SiO₃) in the alkaline activator with treated textile effluent. Unlike prior works that focus solely on solid waste incorporation, this research pioneers the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 32–42 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Experimental Research on the Strength Properties of Concrete with Recycled Aggregate, Pond Ash, and Rubber Powder Replaced in Part for Concrete Materials in Standard Grades
Abstract: Concrete, a fundamental material in modern construction, poses environmental concerns due to its significant carbon footprint. To mitigate this impact, researchers explore alternative materials like fly ash, GGBS, alcofine, and rubber powder as cement replacements. This study examines the durability and strength of concrete that contains recycled aggregate, pond ash, and waste rubber powder. Waste rubber, abundant from industrial and automotive sources, poses disposal challenges. Pond ash, a byproduct of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 11–21 Read article