Search
46 articles for “Young’s modulus”
-
California Bearing Ratio and Young’s Modulus Behavior of Clinker Stabilized Fly Ash-Mine Overburden Mixes
Abstract: Fly ash is a major byproduct of coal combustion. Fly ash often causes disposal problems and environmental pollution. This paper presents detailed laboratory investigation carried out on clinker stabilized fly ash-mine overburden mixes to find out its suitability for sub-base of mine haul road pavements. Proctor compaction test, Unconfined Compressive Strength (UCS) test, California Bearing Ratio (CBR) Test, Scanning Electron Microscopy (SEM) and Energy Dispersive X-ray Spectroscopy (EDX) were conducted …
Published in Recent Trends in Civil Engineering & Technology · Vol. 3, Issue 3, 2013 · pp. 1–10 Read article
-
The Mechanical Properties of Manganese Chloride Salt Reinforced [PVA: PVP] Blend Films
Abstract: In this study, pure [PVA: PVP] polymer blend film and MnCl2·4H2O salt reinforced polymer blend films at different weight ratios (10–50) wt%) were prepared by using the casting method. The effect of salt weight ratio on the mechanical properties of the [PVA: PVP] polymer blend films reinforced by MnCl2·4H2O salt was also studied. The experimental results obtained from the tensile test of the [PVA: PVP] polymer blend films reinforced by …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 8, Issue 2, 2021 · pp. 16–23 Read article
-
Design and Evaluation of Nano-cantilever Beam for Sensing Application
Abstract: Sensor array offers several advantages such as selectivity enhancement towards analytes,multiple component analysis etc. In case of an array system, we see that one cantilever beamcan be set as a reference, while the other beams are subjected to varying loads. As a result,even a very small deflection would be detected with the help of adjacent beams, henceenhancing the sensitivity of the cantilever. By using an array of beams with differentfunctionalization …
Published in Recent Trends in Sensor Research & Technology · Vol. 7, Issue 3, 2020 · pp. 1–7 Read article
-
Nano-mechanical and viscoelastic behavior of advance ultrafine graphite reinforced unsaturated polyester based prosthesis layup resin
Abstract: A new durable biomedical composite for prosthesis was designed to obtain enhance mechanical and viscoelastic properties, in particular nanohardness and young’s modulus. The nanoindentation technique was employed to investigate nano-scale mechanical properties of unsaturated polyester resin and its advance prosthesis lay-up nanocomposite resin with different amount of exfoliated graphite fillers loading. It has been observed that the young’s modulus of the nanocomposites gradually increase with increasing amount of reinforcement content. …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 7–15 Read article
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Tensile and Impact Properties of Jute/Glass and Jute/Carbon Fiber Reinforced Polypropylene
Abstract: AbstractComposites have created a niche in the world market today as they provide a stiff, strong and lightweight material. Two types of composites polypropylene/jute/glass fiber and polypropylene/jute/carbon fibers were prepared by varying the percentages of jute, glass and carbon fibers, respectively. A proportion of 35:5, 30:10, 25:15 and 20:20 were maintained between jute and other reinforcing fiber (glass or carbon) in polypropylene matrix. Tensile and impact test specimens were prepared …
Published in Journal of Polymer & Composites · Vol. 4, Issue 3, 2016 · pp. 35–39 Read article
-
Experimental Investigation on Mechanical Properties of Concrete Replacing of Steel Slag as Coarse Aggregate
Abstract: The basic objective of this study was to identify alternative source of good quality aggregate which is depleting very fast due to the fast pace of construction activities. This paper describes the optimum level of replacement of Energy Optimized Furnace (EOF) steel slag by weight of coarse aggregate for a mix proportion of M20 grade concrete to find out the optimum ratio of steel slag. Civil Engineers have been challenged …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 44–49 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Investigate an Implementation Study of TI-6AL-4V Lattice-based Scaffold Design Using Finite Element Analysis
Abstract: Implementation studies are advised to determine the effectiveness and performance of bone scaffolding in morphology, which has been demonstrated scientifically. The rehabilitation of bone defects, which is still a complex problem in orthopedic surgery, was the subject of an implementation study we provided. Biomaterial scaffolding porosity and pore size are essential in both in vivo and in vitro bone development. However, it has been linked to various drawbacks, including poor …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 1, Issue 1, 2023 · pp. 28–35 Read article
-
An experimental investigation on nano concrete mixed with graphene oxide for bubble deck void slab
Abstract: Concrete is one of the material widely used in construction. Cement based concrete has great properties with high performance, its intrinsic brittleness is a weakness which needs further investigation. Several researchers in the past have used different materials to overcome this brittleness and over the past few years research has proven that addition of Graphene has improved mechanical properties like higher flexibility, Tensile strength, and Young’s Modulus. The experimental study …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 2, 2020 · pp. 36–47 Read article
-
Experimental Study on Mechanical and Tribological Characterization of Arecanut Shell Fibre Reinforced Composites with MWCNT Nanofillers
Abstract: Natural fiber-reinforced composites (NFRCs) are emerging as sustainable alternatives to conventional synthetic composites due to their eco-friendliness, cost-effectiveness, and favorable mechanical properties. This study evaluates the mechanical and tribological performance of Areca Nutshell Fiber (ANSF)-reinforced epoxy composites with multi-walled carbon nanotubes (MWCNTs) as nanofillers. The composites were fabricated using the vacuum bag molding technique. Tensile tests assessed strength, modulus, and elongation, while flexural tests evaluated bending resistance. Pin-on-disc tests examined …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 47–64 Read article
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Sustainable Epoxy Composites Enhanced by Cellulose Nanocrystals for Structural and Thermal Applications
Abstract: This study presents the advancement and behaviour analysis of sustainable nanocomposites reinforced with cellulose nanocrystals (CNCs), a biodegradable and high-aspect-ratio nanofiller derived from microcrystalline cellulose. CNCs were incorporated into a bisphenol-A-based epoxy matrix at varying concentrations (0, 1, 3, 5, and 7 wt%) to assess their influence on mechanical, thermal, and viscoelastic properties. The tensile strength of the composites increased significantly, from 45 MPa for neat epoxy to 65 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 126–134 Read article
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Harnessing Marine and Agro-Waste Resources: Bioengineered Seaweed Polysaccharide–Coconut Films for Next-Generation Sustainable Packaging
Abstract: The increasing demand for biodegradable alternatives to petroleum-based plastics has led to significant interest in marine biopolymer-based packaging materials. This study focuses on the development of eco-friendly biocomposite films by reinforcing carrageenan, extracted from Kappaphycus alvarezii, with alkali-treated coconut at varying loadings (5%, 10%, and 15% w/w). The films were fabricated via solvent casting and subjected to comprehensive characterization. Mechanical analysis revealed substantial enhancement in tensile strength from 21.3 MPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 217–227 Read article
-
Polymer Chemistry in Flexible Dental Assemblies: Designing a Polymer-Based Composite Arm for Bio-Fluid Extraction Tube Support
Abstract: Polymer chemistry offers innovative solutions for designing flexible, durable assemblies in medical applications. This study explores an assembly for holding a bio-fluid extraction tube, featuring a flexible arm interpreted as a polymer composite, aimed at enhancing dental procedures. The assembly comprises a gooseneck-style arm—hypothesized as a rubber or fiber-reinforced polymer—connecting a first clamp (for anchoring to an object, e.g., dental chair) and a second clamp (securing the extraction tube). The …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 285–292 Read article
-
Effect of Carbonyl Iron Particle Concentration on The Printability and Stiffness of Magnetorheological Elastomer Filaments
Abstract: Magnetorheological elastomer (MRE) are increasingly valued for their field-responsive mechanical properties, making them ideal for adaptive components in automotive, aerospace, and vibration control systems. However, conventional mould-based fabrication methods limit design flexibility, produce excess material waste, and are unsuitable for complex or customized geometries caused challenges that have hindered broader industrial adoption. Although 3D printing offers a compelling alternative, research on printable MRE filaments remains limited, particularly regarding how carbonyl …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 310–317 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article