Search
237 articles for “Tensile Testing”
-
Optimization of Process Parameters for FDM Printed Tensile Test Specimens to Reduce Energy Consumption and CO2 Emission for Sustainable Manufacturing
Abstract: Three-Dimensional Printing (3D Printing) is one of the advanced manufacturing technologies which is being tremendously used in many fields because of its innovative applications. The concept of making a three-dimensional product by adding the material layer upon layer through Computer Aided Design (CAD) file data as input source is known as 3D Printing. Fused Deposition Modelling (FDM) is one of the leading technologies from all the available 3D Printing technologies, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 63–71 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites
Abstract: The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–11 Read article
-
Mechanical Testing Under Tensile-load
Abstract: Mechanical testing is a technique used to establish a material's mechanical qualities by examining its strength, toughness, hardness, and other characteristics. Specimens produced of various materials whose qualities need to be examined are used to verify this property. In which a static load is applied and a dynamic load is applied, and the test is completed. Understating loads in mechanical testing is the topic of this research article. Any manufacturing …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 1, 2025 · pp. 1–10 Read article
-
Functionally Graded Natural Fibre and SiC-reinforced Polymer Composite: Mechanical Properties
Abstract: Multifunctional materials, also called functionally graded materials (FGMs), are based on natural fibres or fillers and vary in composition and/or microstructure to control functional, structural, or thermal, properties. Functionally graded materials (FGMs) have been created for use in spacecraft, aircraft, and other engineering applications because they can withstand extremely high temperatures. Particle-reinforced FGMs, which make up the majority of FGMs, are made differently depending on their position. The mechanical and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 1–14 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Fabrication of Natural Fibre Reinforced Polymer Composite by Hand Lay-Up Process
Abstract: The recent development in technologies has increased the usage of non-renewable resources during pro- duction due to remarkable properties. However, it has been a threat and unable to be replenished once used. In addition to this, natural fibre strengthens in a more significant way and it’s widely applicable in polymer composites materials. Furthermore, the use of plant fibres in polymer composites is due to its low cost and significant properties. …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 1, 2025 · pp. 13–19 Read article
-
Mechanical Characterization of Adhesive in Lap Joint Under Tensile Load
Abstract: The present work gives details of adhesive characterization in lap joints under quasi static tensile failure load. Rivets are major threat for an aircraft structure because of high stress concentration at lesser area ease to failure and also causes drag in aerodynamic perspective. Researchers are searching for a different method to avoid the stress concentrations in lesser area. The use of adhesives instead of rivets is most feasible solution for …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 96–103 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Impact of Tool rotating speeds on the Mechanical characteristics of dissimilar friction stir-welded AZ80A-Mg – AA6061-Al joints
Abstract: In this investigation, separate AA6061-Al and AZ80A-Mg alloy plates were effectively joined through stir welding with friction. We looked closely at the weld joints' characteristics, especially their mechanical aspects. In the experiment, here were multiple tool rotating rates (rpm) of 800, 1000, 1200, 1400, and 1600 used. A cylindrical pin-equipped tool featuring a tapered profile was utilized, inserted into the AA6061 alloy plate is offset by 0.5 mm, while maintaining …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 161–168 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
Interfacial Engineering of Carbon Fiber/Epoxy Laminates Using Functionalized Graphene Nanoplatelets: Experimental and Numerical Study
Abstract: Current research work studies the influence of amines(–NH₂) and carboxyl(–COOH) functionalized graphene nanoplatelets on the mechanical and thermomechanical behavior of unidirectional hybrid composite. Composites having different graphene concentration from 0 to 0.7 wt% were fabricated, characterized and analyzed for multiple testing - tensile testing, dynamic mechanical analysis (DMA) and Fourier transform infrared spectroscopy (FTIR). Tensile testing indicates better elastic modulus and tensile strength due to efficient load transfer between nanoparticles …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 61–77 Read article
-
Development and Characterization of Pseudo-Elastic Ternary Cu-Al-Be Shape Memory Alloy and Its Scope as Shape Memory Hybrid Composites
Abstract: This research investigated the potential of the Cu-11.95Al-0.51Be shape memory alloy (SMA) for vibration damping applications. This specific composition of the alloy was selected to ensure the presence of the austenite phase (ß-phase) and to evaluate the pseudo-elastic (SE) behavior. This research explores the design, fabrication, and characterization of a pseudo-elastic ternary alloy. The key parameters examined in this study were the alloy phase and pseudo-elastic behavior. Other important factors, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 370–385 Read article
-
Experimental and Numerical Studies on Radial Tensile Strength of Composite Rotor
Abstract: This paper describes the experimental and numerical studies on the radial tensile strength (RTS) of composite rotor. Carbon/epoxy composite rotors were fabricated using a filament winding process and their radial tensile strength was determined by diametric tensile testing of composite C-rings. The radial tensile strength of the composite rotor was measured as ~ 22 MPa and the failure was found to occur circumferentially symmetric about the horizontal plane of the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 985–996 Read article
-
Evaluation on the Mechanical Strength of TIG Welded 6061Aluminium Alloy Joints
Abstract: Aluminum alloy Al-6061 is extensively used in aerospace, automotive, and marine industries due to its excellent mechanical properties, lightweight nature, and corrosion resistance. However, welding this alloy presents challenges such as porosity, hot cracking, and strength reduction in the heat-affected zone (HAZ). Tungsten Inert Gas (TIG) welding, known for its precision and quality, is commonly employed for joining Al-6061. This study investigates the tensile strength of TIG-welded butt joints of …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 34–39 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
New Design Formulae for Safety and Precision in the Fatigue Engineering of Mechanical Components and Structures
Abstract: This paper introduces two new formulae, termed the Nori Fatigue Formulae, for determining the maximum allowable fatigue stress in mechanical components and structures with significant stress concentrations. These formulae will eliminate the usage of code-sensitive safety factors along with other factored values from the entire mechanical design engineering work, ranging from a safety pin to spacecraft. The first formula gives the maximum allowable fatigue stress in tension, and the second …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 6–24 Read article
-
Development And Examination of a Composite Material Reinforced with Natural Bamboo Fiber
Abstract: This work provides a novel replacement for fiber-reinforced polymers (FRP) by integrating bamboo fibers into an epoxy matrix. Numerous studies are being conducted in this area to reach the intended standard. This composite exhibits a strong resemblance to synthetic fiber-based composites. This is mainly because to the benefits, which include low cost, biodegradable qualities, easy availability, non-toxicity, non-abrasiveness, and light weight. The representation used for the BFRP was a single …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 417–425 Read article
-
Numerical Studies on Deep Drawability of the Aluminium Alloy, AA6082 and Parameters Affecting It
Abstract: Deep drawing is a metal forming operation used for manufacturing sheet-metal components for application in the automobile, aerospace, and packaging industries. The objective of the present work was to study the various parameters influencing the drawability of AA6082. The deep-drawing process was modeled and simulated in Ls-Dyna Pre-Post(R) V4.6.17 software. The tensile test was performed according to the ASTM-E8M standard on AA6082-T6 material and subsequently annealed to attain higher ductility. …
Published in Journal of Polymer & Composites Read article
-
Optimization of Process Parameter in 3D Printing to Minimize Wear Loss and increase Tensile Strength
Abstract: Additive Manufacturing (AM) and especially Fused Deposition Modeling (FDM) has emerged as a very versatile process of manufacturing polymer components with complex and highly-integrated geometries. Polylactic Acid (PLA) is a favorite of the many thermoplastic FDM materials because of its biodegradability, easy processing and predictable mechanical properties. The study aimed at maximizing critical parameters in FDM process in order to reduce wear loss and also increase tensile strength of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 849–858 Read article