Search
24 articles for “Shear modulus”
-
Numerical Prediction of Shear Modulus of Multi-Layer PUF Cored Sandwich Composites
Abstract: The present numerical investigation was mainly concerned with the evaluation of apparent shear modulus (Gc) of multi-layered polyurethane foam cored sandwich beams using a novel approach through the medium of general purpose program i.e. FEM/ANSYS. Aiming to the goal, three-point bending analysis was performed on sandwich beam models made up of composite face sheets and multi-layer polyurethane foam cores of different layer densities. Finite element models of sandwich beams were …
Published in Journal of Polymer & Composites · Vol. 5, Issue 3, 2017 · pp. 53–61 Read article
-
Integrative Machine Learning Approaches for Predicting the Rheological Behaviour of Soft Magnetorheological Elastomers
Abstract: Magnetorheological Elastomers (MREs) are advanced composite materials known for their ability to alter mechanical properties under external magnetic fields, making them highly valuable in adaptive damping systems, vibration control, and smart devices. The accurate prediction of rheological behavior in soft MREs remains a significant challenge due to the complex interplay between material composition and magnetic fields. To address this challenge, this study employs a multi-pronged approach that integrates traditional material …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1083–1096 Read article
-
Comparative Study of Clamped-Clamped and Clamped-Free Elastic Beams Resting on Bi-Parametric Subgrades and Subjected to Concentrated Moving Loads
Abstract: In this paper, a comparative study of clamped-clamped and clamped-free elastic beams resting on bi-parametric subgrades subjected to concentrated moving load has been investigated. This work takes into account the viscous effects of the moving load. The findings are shown graphically. The methods of solution incorporate integral transformation in combination with convolution theory, a version of Struble's asymptotic approaches, and Fourier integral translate with the series representation of the Dirac-delta …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 17–33 Read article
-
Flexural Vibration of Non-Uniform Beam on Bi-Parametric Foundation Under Harmonic Moving Load with Non-Classical Boundary Conditions
Abstract: The dynamic response to harmonically varying moving loads of non-uniform elastic beam resting on bi-parametric foundation with non-classical boundary condition, time dependent in particular is examined in this paper. Here, the beam is considered non-uniform, with the moment of inertia and the distributed mass varying continuously along the span L as functions of the position 𝑥. In order to guarantee a more stable structure and a reduce risk of resonance, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
Comparative Study of Uniform and Non-Uniform Beams Resting on Bi-Parametric Foundation Under Harmonic Load with Time Dependent Boundary Conditions
Abstract: In this study, we investigated uniform and non-uniform damped and time-dependent elastic beams resting on bi-parametric foundation subjected to harmonically varying moving load. The beam properties, including moment of inertia and mass per unit length, were assumed to be either constant or varying with position along the beam span in this study. The solution methods were based on Mindlin-Goodman method, Fourier sine transformation, weighted residual method, integral transformation, and theory …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 4, Issue 1, 2026 · pp. 33–50 Read article
-
Analysis of Simply Supported and Clamped-Clamped Beam Resting on a Pasternak Foundation Subjected to Moving Load with a Damping Term
Abstract: A comparative analysis of simply supported and clamped-clamped Bernoulli-Euler beams resting on a Pasternak foundation under the action of a concentrated moving load with a damping term, when the inertia effect of the moving load is considered in its analysis, was investigated in this study. The governing equation was solved by representing the Dirac delta function through a Fourier cosine series and applying a combination of analytical techniques, including the …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 3, 2025 · pp. 42–59 Read article
-
Harmonically Varying Moving Load on Time-Dependent Uniform Beam Resting on Pasternak Foundation
Abstract: In this paper, we investigated elastic beam whose properties does not varies with spatial coordinate but constant along the span L of the beam. The moving load considered in this work is harmonically varying moving load with non-classical boundary conditions, time dependent boundary conditions in particular. Also, considered in this work is two parameters foundation which are Winkler and Pasternak foundations. Closed form solutions in plotted form are obtained using …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 3, Issue 2, 2025 · pp. 38–47 Read article
-
Integrated DIPlib and OpenCV Framework for Precise Geometric Characterisation of Woven Fibre-Reinforced Polymer Composites
Abstract: The mechanical properties of woven fibre-reinforced polymer (FRP) composites stem entirely from the geometrical regularity inherent in their reinforcement structure. Changes in the size of the unit cell, fibre tow separation, weave angle, and fibre tow spacing will have an immediate effect on the stiffness and shear modulus of the material. In this paper, a combined machine vision system that incorporates both the OpenCV and DIPlib libraries is proposed for …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 158–171 Read article
-
Mechanical Performance Degradation of Naturally Aged Nitrile Butadiene Rubber in Low Frequency Range...
Abstract: For good mechanical design, damping is often still an invisible requirement. Nitrile Butadiene Rubber (NBR) has a wide range of applications as a damping and sealing material. To offer the long-term service of NBR, it is important to estimate the degradation of modal properties under complex mechanical and environmental loading. The present work aims to correlate the experimental data with generalized higher-order Maxwell models and curve fitting techniques to find …
Published in Journal of Polymer & Composites Read article
-
Effects of Rice Husk Waste on Mechanical Properties of Rubber-Based Speed Bumps
Abstract: In this work, rice husk used as filler has been added to a rubber batch which is used in the manufacturing of rubber speed bumps. The prepared batch was consisted of the reclaim as by-product or as undesirable material. The work completed in one of Iraqi manufacturing of tires. The mechanical properties of the new compositions have been measured for different loadings in the matrix in order to prove the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 3, 2020 · pp. 1–8 Read article
-
Hydrothermal modification of carbon fiber fabrics by ZnO nanorods for mechanical strengthening of CFRP laminates
Abstract: Hexagonal ZnO nanorods were produced on plain woven carbon fiber using a two-step seed-assisted hydrothermal procedure. By varying the process parameters such as molar concentrations, number of seeding cycles, and growth duration at a controlled growth temperature of 90 °C, it is feasible to produce ZnO nanostructures with a range of morphologies, including nanowires, hexagonal nanorods, and nanoflowers. The developed morphologies were examined using field emission scanning electron microscopy and …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 127–139 Read article
-
Influence of Healing Cycles and Asphalt Content on Resilient Modulus of Asphalt Concrete
Abstract: Asphalt concrete pavement is known to exhibit self-healing ability of micro-cracks under repeated loading with rest period and controlled environment. In this work, an attempt has been made to investigate the influence of healing cycles and asphalt content on resilient modulus of asphalt concrete. Asphalt concrete specimens of 100 mm diameter and 63 mm height have been prepared with optimum asphalt requirement and with additional 0.5% asphalt above and below …
Published in Trends in Transport Engineering and Applications · Vol. 4, Issue 1, 2017 · pp. 23–30 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Glass Fiber Layer Effect on Chemico-mechanical Properties of Light Cure Adhesive Systems
Abstract: Introduction: Orthodontic adhesives should have clinically acceptable shear and tensile bond strength to withstand masticatory forces and those generated by treatment mechanics. Mechanical properties of the adhesive, such as flexural modulus of elasticity, tensile strength, and compressive strength, are more heavily influenced by the resin matrix's Degree of cure (DC). Aim: The study compares the effect of the Glass fiber layer on Chemico-mechanical properties using three different light cure adhesive …
Published in Journal of Polymer & Composites · Vol. 11, Issue 1, 2023 · pp. 1–9 Read article
-
Hygrothermal Analysis of Functionally Graded Material Plates
Abstract: This study introduces a novel higher-order shear deformation theory, tailored to accommodate various loading conditions experienced by laminated plates. The theory is specifically designed for the hygrothermal analysis of functionally graded plates. Three homogenization methods are used to calculate the Young's Modulus that is Power law distribution, The exponential distribution and The Mori-Tanaka scheme. Navier's solution scheme is used for flexural analysis of Functionally graded plates simply supported at all …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 44–62 Read article
-
Effects of Sub-Zero Temperatures on the Viscoelastic Properties of Magnetorheological Elastomer
Abstract: Magnetorheological elastomers (MREs) are smart materials capable of tuneable stiffness and damping under applied magnetic fields. This renders the material as a promising candidate for adaptive vibration control and semi-active engineering applications. While their behaviour at elevated temperatures has been widely explored, limited attention has been given to their performance under sub-zero conditions, which are critical for cold-environment applications. As this has become an important concern, the study investigates the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Mechanical and Functional Performance of PET–Kenaf Fiber Hybrid Composites for Domestic Household Applications
Abstract: This research presents a hybrid composite of recycled polyethylene terephthalate (PET) and Kenaf fibers for sustainable household applications. Polyethylene terephthalate from consumer bottles was reinforced with Kenaf fibers at volume fractions of 10–30% and composites were created through compression molding. Mechanical characterization involved tensile, flexural, impact, and hardness testing where appropriate and was standardized according to ASTM standards, while their interfacial interactions were characterized by imaging through SEM. Linear and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1482–1498 Read article
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
Investigation of Mechanical and Thermal Behavior of Glass Fiber–Enhanced PEEK Parts Produced via Fused Filament Fabrication
Abstract: This study investigates the thermal and mechanical properties of Polyetheretherketone (PEEK) polymer and Glass Fiber (GF) reinforced PEEK polymer fabricated using the Fused Filament Fabrication (FFF) process. Specimens were printed in three building orientations—X, Y, and 45°—to evaluate the influence of layer deposition on polymer material performance. Tensile and flexural tests revealed that GF-PEEK polymer exhibited significantly higher Ultimate Tensile Strength (110 MPa in X-orientation), Young's Modulus (4.5 GPa), and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 65–78 Read article