Search
108 articles for “SEM-EDS”
-
Dielectric Studies of 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 Nanoceramic Fabricated by Chemo-mechanical Process
Abstract: The present investigation is aimed toward investigate a straightforward, inexpensive, and environmentally friendly chemo-mechanical method for preparing high-dielectric materials, specifically 0.5Ba0.8Ca0.2TiO3.0.5CaCu3Ti4O12 (BCT-CCTO), by combining metal nitrate combustion with solid TiO2 powder and titanium isopropoxide, Ti (OR)4. The composite was prepared by the mixing of individual materials of Ba0.8Ca0.2TiO3 and CaCu3Ti4O12 through the chemo-mechanical method. Initially, 99% pure Ba (NO3)3, Cu (NO3)2∙3H2O, TiO2 and glycine were taken in their stoichiometry ratios. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–21 Read article
-
Microbially Modified Sustainable Cementitious Composites Using Industrial Ash Fillers
Abstract: The growing demand for sustainable, durable construction materials has driven the development of bio-engineered cementitious composites incorporating industrial by-products and self-healing mechanisms. This study investigates a microbially modified cementitious composite that integrates industrial ash fillers with bacteria-based self-healing technology to enhance mechanical performance and microstructural integrity while reducing cement consumption. Cement was partially replaced with industrial ash at 20%, 30%, and 40% replacement levels, and a uratolytic bacterial strain (Bacillus …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 331–350 Read article
-
Revolutionizing Petrology and Mineralogy: The Study of AI and Advanced Sensor Technologies
Abstract: Petrology and mineralogy are fundamental to understanding Earth's intricate processes, from crustal evolution to economic resource formation. However, traditional methods, while precise, are often laborious, time-consuming, and occasionally subject to interpretive bias. This abstract explores the transformative potential of integrating cutting-edge Artificial Intelligence (AI) and advanced sensor technologies to revolutionize data acquisition, analysis, and interpretation in these critical geosciences. Advanced sensor technologies, including high-resolution spectral imaging (hyperspectral, Raman), automated X-ray …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 1–11 Read article
-
Effect of Bismuth doping on Thiourea crystals : A NLO Material
Abstract: Single crystals of pure and thiourea-substituted bismuth were successfully grown using the slow evaporation solution growth technique at ambient temperature. The impact of thiourea doping on the crystal properties was thoroughly investigated. Solubility tests for the grown samples were conducted at various temperatures, providing crucial data on the dissolution characteristics. Structural characterization of these crystals was performed using single crystal X-ray diffraction (XRD), confirming their crystalline nature. Energy-dispersive X-ray spectroscopy …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 10–16 Read article
-
Parametric optimization of COF of fabricated AA6082/Si3N4/C/Al2O3 composite
Abstract: In the present experimental investigation AA6082/Si3N4/C/Al2O3 composite was successfully fabri-cated using stir casting technique combined with electromagnetic stirrer for wear resistance applica-tions. The produced AA6082/Si3N4/C/Al2O3 composite exhibits improved tribological and me-chanical and properties, according to the experimental results. The generated composite has a micro-hardness range of 60 to 110 HV and an average UTS of 150 to 200 MPa. The tribological perfor-mance was evaluated using a pin on disc tribometer. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 2, 2024 · pp. 144–152 Read article
-
Catalyst-Driven Degradation and Failure Analysis of Intergranular Cracking in 316H Studded Pipes under Refinery Heat Recovery Conditions
Abstract: A failure analysis investigation was carried out on a high-temperature studded pipe used in a convection module for heat recovery in an oil and gas refinery application after leakage was detected during pre-commissioning hydrotesting. The investigated pipe was manufactured from AISI 316H austenitic stainless steel, and carbon steel studs had been joined to its outer surface by high-frequency resistance welding. Two leaks were reported in the pipe under investigation, and …
Published in Journal of Catalyst & Catalysis · Vol. 13, Issue 1, 2026 Read article
-
Synthesis and Applications of Copper- Doped Pyridine Precipitate
Abstract: A metal organic nonlinear optical single crystal, copper doped pyridine material, was created at room temperature using the slow evaporation solution growth technique (SEST). The developed material's crystalline nature was revealed by a powder X-ray diffraction (XRD) analysis. Single crystal XRD study shows that the material synthesized possesses monoclinic system of cell parameters, a = 11.44 Å, b = 7.92 Å, C = 11.74 Å and alpha and gamma is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 51–60 Read article
-
Natural Language Processing in Education: A Review of Applications, Challenges, and Future Directions
Abstract: Natural Language Processing (NLP) has increasingly become a transformative force within the field of education, offering innovative solutions and reshaping traditional methods of teaching, learning, assessment, and educational research. This review explores the evolving landscape of NLP applications in education, shedding light on significant advancements, ongoing challenges, and emerging opportunities. The integration of NLP into intelligent tutoring systems has enabled more personalized learning experiences, while automated assessment tools have enhanced …
Published in International Journal of Computer Science Languages · Vol. 3, Issue 2, 2025 · pp. 11–18 Read article
-
Effect of Different Quantities of MnO Nanoparticles on Growth of Ladies Finger Abelmoschus Esculentus
Abstract: The present study deal with the effect of different quantities of Manganese Oxide Nanoparticles on the growth of Ladies finger Abelmoschus esculentus. Manganese oxide nanoparticles were synthesized by the co-precipitation method and characterized by using UV-V is spectroscopy, SEM, EDAX, FTIR, and XRD. Pot culture studies on different quantities of manganese oxide nanoparticles such as 100, 200,300, 400 and 500 mg for treatments T₀ (control) T₁, T₂, T₃, T₄, T₅ …
Published in Research and Reviews: A Journal of Toxicology · Vol. 12, Issue 2, 2022 · pp. 8–15 Read article
-
Gelatin-EiO2 (Ei = Si/Ti/Zr) Based Mesoporous Nano-hybrids: Synthesis and Characterization
Abstract: The hybrid materials are mostly prepared by combining the organic or bio-organic part to the inorganic building blocks and are used in many applications. Gelatin as one of the main component of hybrid materials is an attractive option. It is biodegradable; biocompatible; non-toxic; bio-adhesive and contains many active groups such as –NH2, –COOH, in the biopolymer backbone makes these hybrid materials important in various technological applications. The synthesis of a …
Published in Journal of Materials & Metallurgical Engineering · Vol. 14, Issue 3, 2024 · pp. 30–58 Read article
-
Unravelling the Influence of Dimensions on the Thermoelectric Properties of AHEGNR
Abstract: The thermoelectric properties of hydrogenated edge semiconductor graphene nanoribbons (GNRs) have thus far been explored in detail. The effects of varying the sizes of zigzag hydrogenated edge graphene nanoribbons (ZHEGNRs) and armchair hydrogenated edge graphene nanoribbons (AHEGNRs) in terms of their properties were investigated in this study. This was achieved via the control of the graphene nanoribbon dimensions i.e., width and length by utilizing density functional theory in Quantum Espresso, …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 14, Issue 3, 2024 · pp. 45–51 Read article
-
Preparation and Characterization of PVA-MgO Nanocomposite Films
Abstract: In this work, Magnesium Oxide Nanoparticles (MgO NPs) doped with 3 g of polyvinyl alcohol (PVA) at different weight percentages (0, 2, 4, 6, and 8 wt.%) using the solvent casting method, to fabricate thin PVA-MgO nanocomposite (NC) films. These films were characterized by (i) XRD, SEM, EDX, DLS, and Zeta Potential for morphological studies, (ii) FTIR spectra and UV-Visible techniques for spectroscopic studies and (iii) DSC for thermal studies. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 27, Issue 2, 2025 · pp. 40–62 Read article
-
Mechanical & Tribological Characterization of Al2024-Alumina-Graphite Reinforced Monolithic and Hybrid Composites
Abstract: This work investigates the mechanical characteristics of Al2024-Al2O3-Graphite reinforced monolithic and hybrid composites fabricated by the stir casting method. Exploratory work involved the fabrication of monolithic composites with varying Al2O3 contents (5-8 wt%) and hybrid composites with the ratios of Al2O3 (2-6 wt%) and Graphite (1-3 wt%) in matrix Al2024. For improving their dispersion, preheated reinforcement particles were introduced in matrix alloy at controlled stirring rates. A homogeneous particle distribution …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 823–836 Read article
-
Enhancing Machinability in the Heat Treatment of Inconel 718: A Comprehensive Review
Abstract: The increasing need for materials with high strength and heat resistance, particularly in aerospace applications, creates machining issues. These materials are generally difficult to machine because to their strong wear resistance, abrasion resistance, and low heat conductivity. This produces strong cutting forces and temperatures, resulting in a limited tool life. variances in the microstructures of various materials can induce variations in machinability due to variances in chemical composition, casting, forging …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 · pp. 9–20 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Valorization of shrimp processing waste by green methodology and its application in Chitosan-PEG composite film
Abstract: Shrimp processing waste is mostly unidentified marine by product, presents considerable environmental pollution which also offers a rich but not fully exploited sources of biopolymers. The current work presents a sustainable method to convert shrimp processing waste into chitosan a biopolymer by green methodology. Isolation of chitin to chitosan from shrimp processing waste was carried through four green methodology steps i. Demineralization using citric acid ii. Deproteinization using papain iii. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article
-
Fracture behavior of 2124Al- 10vol% SiCp composite tensile specimens for different heat treatment conditions
Abstract: This article presents experimental details on 2124Al-10vol% SiCp composite tensile specimens, which were made by squeeze casting process. Cast metal composites are generally very brittle and have poor mechanical properties. To strengthen the matrix and improve ductility, the specimens were heat-treated by solutionizing and aging. Experiments were carried out at 3 different solutionizing temperatures, solutionizing time, aging temperature and aging time to examine the influence of heat treatment process parameters …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 279–291 Read article
-
Experimental Study on the Wear Mechanisms of Cutting Tools in High-Performance Machining
Abstract: Because high-performance machining (HPM) may increase output and improve product quality, it is essential for modern production. The quick wear of cutting tools under high-stress circumstances, however, presents serious difficulties that affect surface smoothness, tool life, and cost-effectiveness. Through an analysis of the impacts of cutting speed, feed rate, tool material, and cooling techniques, this work explores the wear processes impacting cutting tools in HPM. Advanced spectroscopy and microscopy procedures …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 1, 2024 · pp. 9–14 Read article
-
Considerations on Fractured Edge Dislocations of Mechanical Tested Hand Laid Hemp Flax GFRP Hybrid Polymer Composites with SEM Verifications
Abstract: In this research study, three types of composite samples are made. Hemp-Glass Fiber (C1), Flax- Glass Fiber (C2), and Hemp-Flax-Glass Fiber Hybrid Composite (C3). For proper fibre-to-fiber adhesion and bonding, a 10:1 mixture of glue (LY556) and brace (HY951) was used. Tensile, flexural, impact, double shear, and hardness research is conducted among all the specimen samples. According to ASTM standards, the comparison is made among C1, C2 and C2 respectively; …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 1–19 Read article