Search
25 articles for “Nano cement”
-
Experimental Investigation for Strengthening the Nanocomposite Cementitious Materials with a Nanoscale Modification
Abstract: For the last few decades, researchers have widely used nanopolymer to control the mechanical properties of cementitious materials as a micro reinforcement. This paper examines and compares the mechanical and microstructure property of nanofiber cementitious material. Twenty-four sets of beam/cube cast with carbon nanofibers (CNFs) cementitious material where CNFs were used from 0.1%, 0.2%, and 0.3% of cement weight. The nanoparticles were scattered using a surfactant and an ultrasonic probe …
Published in Recent Trends in Civil Engineering & Technology · Vol. 12, Issue 2, 2022 · pp. 10–24 Read article
-
Green Revolution in Cement Industry through Nanotechnology
Abstract: In the current decade, construction and infrastructure are most promising sectors for investment because of it's every green growth and cement production is the main pillar of these trades. From 2010 to 2015, China and India are the largest cement producing countries with average production capacity of 2100 and 250 million metric tons per year, respectively. But with these, production of cement creates, the several environment issues, especially related to …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 5, Issue 1, 2015 · pp. 19–22 Read article
-
Behavioral Assesment of Nanoinsertions in Cement Mortar
Abstract: In this paper is reported a comparative behavior of the 28days and long-term mechanical strength of nano additions to cement mortars w.r.t. ordinary controlled cement mortars. Nanomaterials are constantly being used to upgrade everyday products which are in constant use by us. It is seen that when these materials are singly added in optimized proportions to cement mortar they enable an enhancement of compressive strength at 28 days and also …
Published in Recent Trends in Civil Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 15–21 Read article
-
COMPARATIVE STUDY OF COMPRESSIVE AND FLEXURAL STRENGTH OF CONCRETE BY PARTIAL REPLACEMENT OF CEMENT BY NANO SILICA POWDER IN M40 GRADE CONCRETE
Abstract: Concrete, a fundamental building material, traditionally relies on cement as a primary binder. However, the environmental and economic challenges associated with cement production have driven the search for alternative materials that can partially replace cement while maintaining or enhancing concrete's performance. This study focuses on the effects of Nano Silica Powder as a partial substitute for cement in M40 grade concrete, an advanced solution aimed at reducing the carbon footprint …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 18–25 Read article
-
Study on Partial Replacement of Cement with Pinus Fiber and Nano Silica in M30 Concrete Paver Blocks: A Fiber-Reinforced Polymer-Cement Composite Approach
Abstract: This study investigates the partial replacement of cement in M30 grade concrete paver blocks using nano silica and Pinus fiber, with a primary focus on mechanical performance, sustainability, and long-term durability and promoting sustainability. Portland cement, a major contributor to global CO₂ emissions, can be partially substituted using supplementary materials to create eco-efficient construction solutions. Nano silica, due to its high pozzolanic reactivity and ultrafine size, improves the microstructure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 63–76 Read article
-
ANN Approach to Forecasting the Strength of Nano Silica Incorporated Geopolymer Composite
Abstract: Coal and steel industry by-products, such as fly ash (FA) and blast furnace slag (GGBS), have gained significant attention as precursors for geopolymer concrete (GPC) due to their high aluminosilicate content, offering a sustainable alternative to conventional cement. Nano silica (NS), recognized for its exceptional pozzolanic activity and ability to refine microstructure, has shown potential to enhance the mechanical and durability properties of GPC. This study investigates the influence of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 267–278 Read article
-
Mechanical Strength Prediction of Nano-Silica Concrete Composites Using Machine Learning Techniques
Abstract: Nano-silica, or nanosilica, refers to silicon dioxide nanoparticles, which are a kind of silica (SiO₂) with diameters that often fall below 100 nanometers. This nanomaterial has attracted considerable attention because of its distinctive characteristics and diverse array of uses, notably in augmenting the performance of materials such as concrete. The integration of nanoparticles with cementitious matrix in nano-silica concrete offers a viable approach to improving the mechanical characteristics and longevity …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 963–973 Read article
-
Study of Nano Additives in Concrete mix Proportioning Using Nano Particle
Abstract: This research literature reviews on nanomaterials in concrete. Now, the conventional concrete Properties of nanomaterial utilization have been introduced to various attentions to increase. Ultimately, as an introduction, the nanomaterial is increasing the strength and durability of the Concrete. The nanomaterial is described as the material that includes the particle size Less than 200 nm. While the investigation of Concrete in the importance of nanomaterials, the demand is at least …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 37–48 Read article
-
Qualitative and Quantitative Effects of Non-Thermal Atmospheric Pressure Plasma and ErCr: YSGG Laser Activation on Surface Remineralization and Fluoride Release of Three Different Fluoride Varnishes
Abstract: Dental caries remains a prevalent oral health concern worldwide, prompting ongoing research into innovative approaches for caries prevention and management. This experimental investigation endeavors to conduct a comparative assessment of the bioactivity, fluoride release kinetics, shear bond strength, and compressive strength of glass ionomer cement (GIC) augmented with three distinct types of inorganic bioactive nanoparticles. Bioactive nanoparticles have garnered interest in dental materials for their potential to enhance material properties …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 292–303 Read article
-
A Comprehensive Review of Geopolymer Concrete: Performance and Incorporation in RCC Beams
Abstract: This review paper provides a succinct overview of recent strides in geopolymer concrete technology, focusing on its strength, durability, and sustainable applications. Beginning with the fundamental principles of geopolymerization, the paper delves into the latest research findings, emphasizing enhancements in compressive and flexural strength. It critically analyzes the durability of geopolymer concrete against environmental factors and explores innovative strategies, such as incorporating supplementary cementitious materials and nanomaterials, to improve its …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 7–12 Read article
-
A Review of Modifications of Cement Slurry Formulations for Carbon Dioxide Storage
Abstract: Climate action, which includes activities aimed at mitigating climate change or reducing its adverse impacts, is the thirteenth goal of the 2030 SDGs (Sustainable Development Goals). Tthe successful commercial deployment of CCS technology would heavily rely on the integrity of the cement sheath used to complete the wellbores at the CO₂ storage sites. It has been established that the cement sheath made from conventional ordinary Portland cement (OPC) is not …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 1–21 Read article
-
Characteristic Studies on Self-compacting Concrete using Nano Silica with Copper Slag
Abstract: The paper examines the possibility of using copper slag as partial replacement of sand and Nano Silica as partial replacement of cement and super plasticizer and Viscosity Modifying Agent are used in self compacting concrete, in order to overcome problems associated with cast-in-place concrete. Self compacting concrete does not require skilled labours. The percentage of copper slag to be added is 10 %, 20 %, 30 % of total weight …
Published in Journal of Industrial Safety Engineering · Vol. 1, Issue 1, 2014 · pp. 1–11 Read article
-
Recent Progress in Near-Surface Mounted Fiber-Reinforced Polymer Strengthening Systems: Composite Materials, Adhesive Technologies, and Interfacial Bonding
Abstract: Fiber-reinforced polymer (FRP) composites have emerged as one of the most promising classes of advanced engineering materials for structural strengthening and rehabilitation owing to their high specific strength, excellent corrosion resistance, fatigue durability, and design flexibility. Among various strengthening approaches, near-surface mounted (NSM) systems have gained significant attention because they provide enhanced bond performance, improved protection against environmental exposure, and superior utilization of FRP reinforcement compared with conventional externally bonded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1145–1153 Read article
-
Performance of Concrete in Chemically Aggressive Environment by Using Cementitious Materials in Concrete
Abstract: This study investigates the performance and durability of sustainable concrete incorporating industrial and agricultural waste materials specifically Fly Ash, nano silica and Graphene Oxide when subjected to chemically aggressive environments. Traditional Ordinary Portland Cement (OPC) concrete often suffers from micro-structural degradation, sulfate attack, and acid penetration in harsh conditions. However, the integration of pozzolanic wastes creates a synergistic effect that densifies the concrete matrix through secondary C-S-H (Calcium Silicate Hydrate) …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 2, 2026 · pp. 45–51 Read article
-
Evaluation of Hardness, Toughness and Oblique Compression Characteristics of Cement Reinforced Polymeric Composite as Gear Material
Abstract: A distinct type composite material, viz. cement reinforced polymeric composite material has been designed and developed and is successfully implemented for fabrication of a low cost, durable, non-metallic group spur gear. This work addresses the experimental evaluation of toughness, hardness and failure characteristics under oblique compressive load and in turn determines the performance effectiveness of the composite as gear material. Few compositions of cement fillers are chosen along with the …
Published in Journal of Mechatronics and Automation · Vol. 3, Issue 2, 2016 · pp. 10–24 Read article
-
Nano-additives in Concrete: Present Scenario and Challenges
Abstract: This research work reviews on nanomaterials in concrete. Now, the conventional concrete properties of nanomaterial utilization have been introduced various attentions to increase. Ultimately, as an introduction, nanomaterial is increasing the strength and durability of the concrete. The nanomaterial is defined as the material that includes the particle size which smaller than 200 nm. Nanomaterials must be at least 500 nm in size. During the research of concrete in the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 9, Issue 3, 2019 · pp. 11–20 Read article
-
Utilisation of Rice Husk: A Review
Abstract: Rice hulls, the largest milling by-product of rice, constitute one fifth of the paddy by weight. The hulls which can be obtained at relatively low cost are in abundant supply in most developing countries, particularly in the Asian region. This paper investigates the use of rice husk, which is considered a waste, in various fields such as water purification, rubber vulcanization, polymer industry, cement and construction industries, synthesis of silica …
Published in Research and Reviews : Journal of Crop science and Technology · Vol. 7, Issue 3, 2018 · pp. 27–35 Read article
-
Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice Husks Silica Blend
Abstract: AbstractThe accumulation of agricultural and industrial manufacturing waste is an important environmental problem of the most countries in which the means of recycling these waste are not available. Therefore, it is important to find sustainable green engineering applications for the integration of these wastes in the industry and be an environmental, economic and industrial competitor and alternative to materials existing now. Cement waste and rice husks silica were added as …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 29–31 Read article
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Nanocomposites for Building Construction Material
Abstract: Nanocompositesis one of the most active research areas with both novelscience and useful applications that has gradually established it in the past two decades. The recent researches on nanomaterials and nanotechnologies have highlighted the expected utilization of these materials in different fields like medication, development, vehicle industry, energy, broadcast communications and informatics. This is because of the unique qualities of materials at the nano scale. It has been shown that …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 11, Issue 3, 2021 · pp. 26–31 Read article