Search
20 articles for “Langmuir model”
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Removal of AB 10B from Water by Copper Oxide Nano- Particles through Adsorption: A Kinetics and Thermodynamic Study
Abstract: Copper oxide nanoparticle was synthesized by a simple method. Consequently, adsorbent was characterized by using FTIR, XRD, and SEM techniques. The study of optimized parameter contains pH, initial dye concentration, adsorbent dose and contact time. Langmuir, Freundlich and Tempkin models were pragmatic for evaluating adsorption equilibrium data of AB 10B as the adsorbent but experiment show the Langmuir model is best for it. The adsorption kinetic model study was done …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 37–48 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Biosorption of Fluoride from Aqueous Solution Using Ulva fasciata sp.: A Marine Green Algae
Abstract: Water is a useful and vital natural resource for sustaining life and environment that we have always thought to be available in abundance and free gift of nature. Enhanced industrial activity during recent decades has led to the discharge of unprecedented volumes of industrial waste water, which is a serious cause of environmental degradation. Excessive fluoride concentrations have been reported in ground waters of more than 20 developed and developing …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 45–53 Read article
-
Studies on Removal of Coomassie Brilliant Blue R250(CBB) dye Usingligninas Adsorbent
Abstract: Coomassie brilliant blue R-250 (CBB), an organic dye present in wastewater effluent, affects environment by reducing the photosynthetic activity in aquatic ecosystems. CBB must be eliminated from effluent as a result. In the present study, lignin was utilized as a low-cost bio adsorbent for the removal of CBB dye employing an adsorption technique in order to minimize pollution caused by CBB dye. By studying the effect of several parameters includes …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 9–19 Read article
-
Evaluation of Agro-based Adsorbents for Oil Spill Remediation in Freshwater and Saltwater Environments: Kinetic and Adsorption Model Analysis
Abstract: Environmental pollution caused by oil spills poses significant risks to both human health and ecosystems, particularly in regions like Nigeria’s Niger Delta, where oil spills are frequent. Conventional methods for oil spill cleanup have limitations, which has prompted research into alternative, more effective techniques. This study investigates the use of agro-based materials, specifically plantain and banana species, combined with clay soil as adsorbents for oil removal in freshwater and saltwater …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 22–32 Read article
-
Colour Removal from Effluents Using Micromaterials
Abstract: In this study, the ability of Micromaterials to adsorb color from an aqueous solution was investigated by using flocculants and activated carbon prepared from Rice Bran, an agricultural by-product, and batch mode adsorption experiments were conducted. The influence of various factors such as initial concentration (20, 40, 60, 80 mg/L), contact time, pH (4.0-9.0), and dosage on the adsorption capacity was investigated and optimal experimental conditions were ascertained. Adsorption data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 2, Issue 1-3, 2012 · pp. 1–8 Read article
-
A Parametric Study of Methylene Blue Adsorption Using Low-cost Adsorbent
Abstract: This research focused on the adsorptive capacity of activated carbonaceous substance made from the peel of Spanish cherries to remove methylene blue dye from wastewater. Through batch adsorption tests, the impact of several variables on the percentage of dye removal was examined. These variables included adsorbent preparation temperature, adsorbent dosages, initial concentration of dye solution, process time, pH of dye solution, and operation temperature. It was found that using 1 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 10–16 Read article
-
Evaluation of AGO Adsorption Rate Isotherms Using Adsorbent Formulation of Plantain Agbagba1 and Clay of Different Mix Ratio in Pollutant Remediation in Salt Water
Abstract: The application of some agro-based materials in combination with day soil, for the production of adsorbents were investigated in relationship to their performance in AGO (Diesel) treatment in a batch process unit. The research allows the model concept of Langmuir isotherm, Frundlich isotherm and Temkin Isotherm for the determination of the adsorption rate of the various isotherms with respect to the effect of the particle size and the mixed ratios …
Published in International Journal of Pollution: Prevention & Control · Vol. 2, Issue 2, 2024 · pp. 31–42 Read article
-
Photo-Catalytic Degradation of Rhodamine-B by using UV/TiO2 and Nb2O5 Process: A Kinetic Study
Abstract: The photo-catalytic degradation of Rhodamine-B (RB) in aqueous solution with titanium dioxide (TiO2) and niobium pentaoxide (Nb2O5) as photocatalyst in slurry form has been carried out using UV-A light (254 nm). The effect of various parameters such as catalyst loading, pH and initial concentration of the RB dye on degradation have been determined. An attempt has been made to study the effect of process parameters through concentration of dye, amount …
Published in Journal of Catalyst & Catalysis · Vol. 1, Issue 3, 2014 · pp. 12–24 Read article
-
Effective Removal of Widely Applicable Pesticides Using Iron Pillared Clay (Fe/Bt): Adsorption Behaviour and Kinetics
Abstract: The vast application of pesticides for agricultural purpose to enhance adequate plant growth is quite alarming, with its negative environmental influence increasing every day. The current study investigates the potential of iron pillared bentonite (Fe/Bt) for effective removal of three different widely applicable pesticides (Glyphosate, Bentazon and Diazinon) in aqueous solution. This adsorbent has been characterized ab initio by FT-IR spectroscopy. Adsorption parameters such as contact time, initial pesticide concentration …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 1, 2023 · pp. 10–20 Read article
-
Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel
Abstract: Adsorption isotherm study of Activated Carbon produced from cassava peel was carried out using phenol solution as the adsorbate. Langmuir and Freundlich isotherm models were employed for the study. Varying ratios of 1:1, 0.75:1, 0.5:1, and 0.25:1 activating agent to cassava peel were used for the formulation of the Activated Carbon. The Freundlich R2 value for the 1:1, 0.75:1, 0.5:1, and 0.25:1 formulations was 0.822, 0.979, 0.971 and 0.974, respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 8–12 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Exploring Gelatin Film an Eco-Friendly Biomaterial: Synthesis, Characterization, and Environmental Applications
Abstract: This study explores the synthesis, characterization, and application of eco-friendly gelatin films, a sustainable and biodegradable biopolymer alternative to synthetic plastics. Synthesized via solution casting and characterized by UV-Vis spectroscopy, FTIR, and TGA, these films demonstrated excellent molecular integrity and thickness-dependent properties, with higher gelatin concentrations leading to thicker films and delayed solubility. The research highlights their significant potential in removing diverse environmental pollutants, including dyes (methylene blue, methyl orange), …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 1–16 Read article
-
Adsorption of Methylene Blue Dye from Aqueous Solution Using Polyaniline/Xanthan Gum Nanocomposite: Kinetic and Isotherm Studies
Abstract: ABSTRACTIn the present study, adsorptive properties of polyaniline/xanthan gum nanocomposite were investigated for methylene blue (MB) dye in aqueous solution. The effects of different parameters, namely adsorption time, adsorbent dose, pH and initial dye concentration were on dye adsorption were investigated. The results revealed that a rise se in pH lead to a significant increase in adsorption efficiency. Optimum adsorption time and nanocomposite dose were obtained 60 min and 0.075 …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 17–26 Read article