Search
145 articles for “Interface condition”
-
Bearing Capacity of Double Box Shaped Skirted Footings on Sand
Abstract: The double-box-shaped footing with and without skirt and sand-resting pressure settlement behavior was discussed in this paper. Different parameters are normalised skirt depth (0.25 to 1.5), relative sand density (30 to 60 percent) and sand footing interface state (partially rough and rough). Results of this study showed that a general and local shear failure was observed at a relative density of 50 percent and 60 percent, and 30 percent and …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 10–19 Read article
-
Image-Based Evaluation of Implant Tissue Interface Integrity in Polymer Orthopaedic Devices
Abstract: Polymer orthopedic implants offer radiolucency and mechanical compatibility with bone, but long-term success depends on maintaining a stable implant–tissue interface. Routine imaging is widely available for follow-up, yet interface integrity is commonly judged qualitatively, limiting early detection of fixation compromise and reducing comparability across devices and time points. This work presents an image-based methodology to quantify interface integrity by extracting interpretable interface descriptors from a standardized interface belt around the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 170–179 Read article
-
Fuel Cell Power Conditioning for Low Power Applications
Abstract: Fuel Cells are the important building blocks of hydrogen-based applications. Proton Exchange Membrane Fuel Cell (PEMFCs) are useful for ambient temperature operating conditions. Fuel Cells cannot be interfaced to loads directly owing to many sources of power losses. Power Conditioning and Interface are equally important for driving loads using Fuel Cell generated power. Paper discusses the requirements of power conditioning, types of DC–DC converters, Experimental work performed on DC–DC converter …
Published in Journal of Electronic Design Technology · Vol. 7, Issue 3, 2016 · pp. 13–23 Read article
-
Interfacial and Tribo-Mechanical Performance of a TiO₂–Castor Oil Polymeric Nanofluid During Sustainable Machining of AISI 316L Stainless Steel Under MQL Conditions
Abstract: This research examines the tribo-mechanical performance and interfacial film characteristics of a TiO₂-reinforced castor-oil polymeric nanofluid during the turning of AISI 316L stainless steel under minimum-quantity lubrication (MQL). A Taguchi L9 orthogonal array was utilized to assess the synergistic effects of cutting speed, depth of cut, and coolant composition on surface integrity, while machining experiments were performed under dry, conventional, and TiO₂-nanofluid lubrication techniques. ANOVA and multiple-regression modeling were used …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 901–914 Read article
-
A Hybrid Multi-Physics Ensemble Deep Learning Framework for Simultaneous Prediction of Thermal and Electrical Conductivity in Functional Polymer-Based Nanocomposites
Abstract: Polymer-based nanocomposites have become promising materials for applications in energy storage, flexible electronics, biomedical devices, aerospace components, and advanced engineering because of their tunable thermal and electrical properties. Reliable prediction of these properties is essential for accelerating material design; however, existing analytical models and conventional machine learning techniques often fail to represent the complex interactions among filler characteristics, polymer matrices, processing conditions, and interfacial transport phenomena. This work presents HMEP-Net, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1062–1082 Read article
-
Solidification of Brass Casting in Green Sand Mould: A Numerical and Experimental Study
Abstract: Casting which is also known as founding, is one of the earliest metal shaping methods. It means the pouring of molten metal into the refractory mould then allowing it to solidify. After solidification removing of part from the mould either by breaking the mould or ejecting the mould part. Present study has been focused on solidification of brass in green sand mould formulation. Two-dimensional heat conduction equation in cartesian co-ordinate …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 3, 2015 · pp. 24–30 Read article
-
Artificial Intelligence for Polymer and Nanocomposite Materials: Performance Prediction, Manufacturing Optimization, and Future Perspectives
Abstract: The exceptional mechanical properties, design flexibility, and lightweight nature of polymer composite and nanocomposite materials make them indispensable in a wide range of applications, including aerospace, automotive, construction, biomedical, and energy sectors. The optimization of the strength, durability, and manufacturing efficiency of polymer composite and nanocomposite materials is highly challenging because their performance depends on matrix composition, reinforcement type, fiber or nanoparticle distribution, interfacial interactions, processing conditions, and environmental factors. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Interfacial Bonding and Performance of Polymer-Based CFRP Composites in Externally Applied Configurations
Abstract: Polymer-based carbon fiber reinforced polymer (CFRP) composites are widely used for externally bonded strengthening and retrofitting applications due to their high strength-to-weight ratio and adaptability to existing structures. In such systems, overall performance is governed not only by the fiber–matrix interaction within the laminate, but more critically by the polymer adhesive layer and its interaction with the substrate. Polymer chemistry, interfacial bonding mechanisms, processing conditions, and environmental exposure collectively influence …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 952–966 Read article
-
Implement Explainable Machine Learning to Improve Conductivity in Polymer-CNT Nanocomposites: Supporting Adaptive, Flexible, and Long-Lasting IoT Wrap-Around Electronics Applications
Abstract: The rapid growth of Internet of Things (IoT) technologies requires electronic components that are adaptable, lightweight, and durable, and that can continue to function well in diverse contexts and circumstances. Polymer–carbon nanotube (CNT) nanocomposites have become interesting choices for these kinds of uses because they are more flexible, conduct electricity better, and can be made to fit specific needs. However, improving conductivity in these heterogeneous systems remains a major challenge …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 238–254 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Implement Artificial Intelligence and Machine Learning for Engineering Design, Predictive Modeling, and Optimizing Polymer Nanocomposites
Abstract: Polymer nanocomposites are high performance engineered materials obtained by inclusion of nano-sized fillers into the polymer matrix to enhance mechanical, thermal, electrical, barrier and functional properties. However, the complex and non-linear interactions among polymer chemistry, nanofiller characteristics, filler concentration, dispersion, interfacial bonding and processing conditions make it challenging to anticipate and maximize their properties. Artificial intelligence (AI) and machine learning (ML) offer powerful data-driven solutions to these difficulties by establishing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Virtual Method to Predict Dental Disease
Abstract: The integration of technology and medicine in the healthcare domain has led to the emergence of inventive strategies to improve patient care and diagnostics. One such groundbreaking methodology is the utilization of Convolutional Neural Networks (CNNs) within the domain of deep learning, particularly for image recognition and processing tasks. In this paper, we propose a novel approach to image recognition that employs state-of-the-art deep learning algorithms to create a user-friendly …
Published in Journal of Artificial Intelligence Research & Advances · Vol. 11, Issue 1, 2024 · pp. 8–15 Read article
-
Effect of Particle Size of Sand on the Interface Shear Behavior of Sand and Non-Woven Geotextile
Abstract: Soil-geosynthetic interface is the weakest zone for shear failure. It is influenced by size, shape, density and water content of sand. It is also influenced by the properties of geosynthetic such as texture and structure. This paper explores the influence of the size of sand on the behavior of sand-geotextile interface. Three types of sands namely coarse, medium and fine sand and non-woven geotextile were used in this study. Several …
Published in Journal of Geotechnical Engineering · Vol. 8, Issue 3, 2021 · pp. 44–54 Read article
-
Smart Aquaculture: Enhancing Productivity and Welfare Through Advanced Monitoring Systems
Abstract: This paper introduces a sophisticated aquaculture-based fish tank monitoring system aimed at optimizing productivity and ensuring fish welfare. Water level adjustment to maintain ideal circumstances, turbidity detection to identify suspended particles, and continuous pH monitoring for water quality are the three critical activities that its core component, an Arduino Uno microcontroller, oversees coordinating. This improves real-time monitoring and management by setting off automated notifications via SMS and IoT website data …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 2, 2024 · pp. 32–40 Read article
-
Automated Healthcare Support System with AI
Abstract: The Automated Healthcare Support System with Artificial Intelligence (AI) presents a smart and scalable digital solution aimed at improving the accessibility and efficiency of healthcare services. The system is designed to provide preliminary medical guidance, perform symptom-based analysis, and deliver health-related insights through an intuitive user interface. By enabling early identification of potential health conditions, it assists users in determining the necessity of professional medical consultation. The proposed platform utilizes …
Published in Research and Reviews : A Journal of Medical Science and Technology · Vol. 15, Issue 1, 2026 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Vibration Mechanics of Hybrid Al 5083/SiCp/Fly Ash Composite Plates for its Use in Dynamic Structures
Abstract: Metal Matrix composites are a unique class of materials, with specific characteristics. The selection of reinforcement phase for reinforcing the metal matrix depends on many parameters and is a major concern, Silicon carbide particulates (SiCp) enhances the hardness of specimens but on the other hand it induces brittleness in the specimen which is of major concern, henceforth fly ash particulates are thought of as an alternative reinforcement for improving the …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 1, 2017 · pp. 11–18 Read article
-
Polymer Matrix Characterization and Interfacial Engineering in Bamboo/Sisal/Chopped Mat Hybrid Fiber Composites
Abstract: The present investigation focuses on the characterization of polymer matrices and the interfacial behavior of bamboo, sisal, and chopped strand mat (CSM) fiber-reinforced epoxy composites. The work aims to understand how natural fibers influence the curing, thermal, and adhesion properties of hybrid composite systems. Experimental analyses were carried out using differential scanning calorimetry (DSC), dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and Fourier transform infrared spectroscopy (FTIR) to evaluate curing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 123–135 Read article
-
Analysis of Power Quality Disturbances in Distribution Systems with Renewable Energy Integration
Abstract: The growing integration of renewable energy sources within the electrical distribution systems has greatly altered the working dynamics of the contemporary power grids. The introduction of intermittent and nonlinear sources (solar photovoltaic and wind energy systems) leads to a wide range of power quality disturbances, however. The current paper includes the in-depth examination of the problem of power quality in the distribution systems with the integration of renewable energy. The …
Published in Trends in Electrical Engineering · Vol. 16, Issue 1, 2025 Read article
-
Experimental and Process Optimization Study on Thermal Stress Reduction in TiC–Steel Brazed Joints Using Polymer-Derived Composite Interlayers
Abstract: In this, an experimental investigation aimed at reducing crack formation due to thermal stress in TiC-steel brazed joints through optimization of key process parameters is presented. The primary objective was to develop an integrated and reliable brazing strategy by examining the effects of filler material selection, brazing gap, cooling conditions and type of flux. In this study, polymer-derived composite interlayers were developed through controlled synthesis and nanocomposite engineering to mitigate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 524–540 Read article