Search
33 articles for “Galvanic”
-
Thermal Spray Coating an alternative coating solution in place of The Traditional Hot Dipped Galvanizing Process in Present Industrial Scenario
Abstract: In present scenario the Thermal Spray Coating is prestigious alternative solution to replace traditional Hot Dipped Galvanizing Coating as an alternative solution for new and existing structures in industries and offering a range of benefits for long durability and maintenance free solution for more than 25 years in service. There is no weld life for site application in case of Hot Dip Galvanized Structure and may customers have issue with …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 11, Issue 3, 2024 · pp. 08–15 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Process Optimization of Spot Welding for Galvanized Automotive Steel Sheets
Abstract: Resistance Spot Welding (RSW) is a pillar of the modern automotive industry with the usage of lightweight and high-strength products at the highest point of demand. The optimum weld quality of galvanized steel sheets which is a material of choice because of its additional corrosion protective property is however not achieved easily. This study is a well-developed data-based solution to designing the RSW process in the most efficient way, providing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 32–42 Read article
-
Chemical and Electrocoagulation for Chromium (VI) Removal from Galvanic Effluents
Abstract: Industrial effluents usually contain 10 to 500 mg/l Cr(VI); that according to internationalenvironmental rules must be set at permissible levels before being discharged into the environment.The upper permitted levels of chromium are 0.5 mg/l for effluent discharge and 0.01 mg/l for drinkingwater respectively. Hexavalent chromium is a very toxic heavy metal moiety occurring in variousindustrial wastewaters, such as electroplating, anodizing, tanning and dyeing effluents. Industrialeffluents may contain hundreds of mg/l …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 49–55 Read article
-
5000 Series of Aluminum and Its Alloys Opaque by Inhibitors
Abstract: 5XXX series of alloys are prepared for marine applications. Light weight, strength, low maintenance and inherent tendency to form passivity surfacing have selected these alloys for manufacture of cargo ships. Anti corrosive paints have been traditional protections in these alloys. Workers exposed to chromate residues during sanding of aircraft and recoating have increased risk of cancer to 250,000-fold higher. These paints are hazardous for aquatic life, so eco-friendly corrosion inhibitors …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 6, Issue 2, 2019 · pp. 1–8 Read article
-
Evaluating Novel Inhibitor Pigment Blends using Electrochemical Scanning Techniques (EIS, SVET and SKP)
Abstract: AbstractOne of the main applications coming to the fore for scanning vibrating electrode technique (SVET) and scanning Kelvin probe (SKP) systems is ability to look at inhibitor combinations, which could be used to replace chromates in coil-coated galvanized steels. The results are very promising using the SVET system and results with the SKP system also show results to be comparable with the SVET system. Electrochemical impedance spectroscopy (EIS) is also …
Published in Journal of Polymer & Composites · Vol. 1, Issue 1, 2013 · pp. 6–16 Read article
-
The Impact of Distinct Dopant Elements (Cu and Al) on the Electrochemical Characteristics of MgO Thin Films Formed Using the Electrodeposition Technique
Abstract: By using an aqueous electrodeposition technique, copper (Cu) and aluminum (Al) doped magnesium oxide (MgO) thin films were created. We examined how the dopant elements affected the electrochemical characteristics of MgO thin films deposited on stainless steel (SS) substrates in the current study. We annealed the MgO-based films at 450◦C. The MgO films doped with Cu and Al have been determined by X-ray diffraction (XRD) results. Cyclic voltammetric analyses (CV), …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 12–17 Read article
-
Heat Absorption and Conversion Thermal Efficiency Analysis on Mass Concrete Embedded Water Pipes as Permanent Roof
Abstract: The solar thermal storage ability of Concrete roof structures was analysed by placing water pipes made of Galvanized pipes embedded inside the top plaster. The performance parameters such as the inlet and outlet water temperatures, ambient temperature and solar radiation has been recorded and indicates positively on embedding this system in to real time roof structures. Studies were carried out at Aluva, South West India (10.1004° N, 76.3570° E). The …
Published in Journal of Thermal Engineering and Applications · Vol. 11, Issue 2, 2024 · pp. 22–27 Read article
-
Investigating the Role of Moisture in the Physical Properties of Harra (Terminalia chebula) Fruit
Abstract: Harra (Terminalia chebula) is known as the “king of medicines” in Ayurveda. Its fruits include astringent, purgative, antibacterial, antifungal, and laxative effects. The behavior of harra fruit is mainly dependent on the moisture present. It affects the harvest, post-harvest machinery, separation, packaging, and transportation of harra fruit. This study focused on T’s physical qualities of chebula fresh fruit at 20%–25% (wb) moisture content, such as 50 fruit mass, length, width, …
Published in Emerging Trends in Metabolites · Vol. 2, Issue 1, 2025 · pp. 11–19 Read article
-
Corrosion and Corrosion Protection of Unio in Carbonic Acid Medium
Abstract: Unio is a calciferous animal, and its outer surface is made of calcium carbonate. It usually happens in sources of sweet water. They create carbonic acid by absorbing carbon dioxide. It changes the pH of sweet water sources thus water becomes acidic. It develops corrosive environment for Unio. Carbonic acid interacts with Unio to form corrosion cells on the interface of Unio. This acid oxidizes calcium carbonate into calcium ions …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 1, 2025 · pp. 22–31 Read article
-
Study the Impact of Corrosive Pollutants on Building Materials Corrosion
Abstract: Reinforced concrete structures (RCS) may be made more resistant to corrosion by using fiber reinforced polymers (FRP). One of the primary concerns with reinforced concrete constructions is corrosion. It causes disintegration in building material components by interactions with salts, acids, and alkalis. Both within and outside of reinforced properties, pollutants and effluents accelerate disbanding. When bio-waste and building materials come into contact, microorganisms and macro organisms, grow and emit acid …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 20–29 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Enhancing Mechanical Properties of Fiber-Reinforced Composites Through Sorghum Husk and Unsaturated Polyester Resin.
Abstract: Plastic, a versatile synthetic polymer, holds considerable significance and utility in human society due to its manifold applications. However, its deleterious ecological ramifications have spurred growing apprehensions. This has galvanized the pursuit of ecologically amicable substitutes, propelling interest in the domain of composite materials. Composites are formulated by amalgamating diverse substances, and in this context, Styrene Diluted Unsaturated Polyester Resin (SDUPR) is melded with natural constituents. Among these organic constituents, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 59–65 Read article
-
Corrosion and Corrosion Protection of Cast iron due to Bio-organism
Abstract: Cast iron is a high tensile strength metal. It is generally used for making tools, pipe fitting, electrical fitting equipment and rail track. It interacts with corrosive substances to develop electrochemical cell on their interface. Corrosive substances are acids, bases, salts, bio-wastes, particulates and pollutants. These substances produce hostile medium for materials. These harmful wastes discharge by industries, households, agricultural, urbanization, development of infrastructure, construction works, thermal power stations, hydropower, …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 105–114 Read article
-
HPV and Cardiovascular Risk: Unpacking a Novel Link Between Viral Infection and Heart Disease
Abstract: Human papillomavirus (HPV) is best known for its oncogenic potential, yet a growing body of evidence suggests that persistent HPV infection may also contribute to cardiovascular disease (CVD). In 2025, pooled analyses and conference reports galvanized attention by estimating that HPV‐positive individuals have ~40% higher risk of CVD and approximately double the risk of coronary artery disease (CAD) compared with HPV‐negative peers, even after adjustment for traditional risk factors. These …
Published in International Journal of Virus Studies · Vol. 2, Issue 2, 2025 · pp. 1–5 Read article
-
Application of Thermal Spray Coatings for Corrosion Control in Oil and Gas Refineries
Abstract: In today’s context, Thermal Spray Coating (TSC) has emerged as a highly durable and reliable alternative to traditional Hot-Dip Galvanizing (HDG). It is increasingly being adopted for both new and existing industrial structures due to its long-lasting protection—often exceeding 25 years—while requiring little to no maintenance. Unlike HDG, which cannot be welded on-site and often poses challenges with repair methods such as liquid coating or cold spray, TSC offers greater …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 106–115 Read article
-
Steel Structural and Functional Characteristics Focusing on Corrosion Mechanisms
Abstract: This research article examines steel structural and functional characteristics, focusing on corrosion mechanisms and inhibitor protection strategies. Steel corrosion affects numerous industries, causing significant economic losses and safety risks. Fundamental electrochemical processes behind various corrosion forms including uniform, pitting, crevice, galvanic, intergranular, and stress-induced corrosion are explained. The chapter highlights the steel industry's importance while investigating how corrosion impacts performance and longevity. Protection methods discussed include material selection, environmental modification, …
Published in International Journal of Minerals · Vol. 2, Issue 2, 2025 · pp. 25–34 Read article
-
Polymeric Coating Applied for Corrosion Protection of Mild Steel in Corrosive Medium
Abstract: Mild steel is coated with a polymer layer of polybutadiene for protection. However, this coating does not effectively safeguard the metal in environments containing moisture, sulphur dioxide, or chloride. These pollutants interact with the polybutadiene-coated surface, creating a highly corrosive atmosphere. Moisture condenses on the coated metal surface and absorbs sulphur dioxide, forming sulphuric acid. This acid initiates both chemical and electrochemical reactions with the polymer-coated metal, accelerating the corrosion …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 2, 2025 · pp. 49–53 Read article
-
Synthesis of A Supercapacitor Based on Nanomaterials
Abstract: Demand for various energy storage technologies in electronic and electrical devices continuously goes on increasing. In that context, objective of this research work is to develop and test an electrode of a energy storage module (supercapacitor) using nickel hydroxide and carbon-based nanocomposite materials. Electrochemical performance of electrode is enhanced by optimizing synthesis parameters and designing the electrochemical cell. Conventional and all solid-state supercapacitors are developed with notable electrochemical performance. Pure …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 4, Issue 1, 2026 · pp. 24–39 Read article
-
Intelligent Polymer-Integrated Wearable Platforms for Sustainable IoT and Predictive Health Monitoring for Migraine Detection
Abstract: Migraine is a neurological disorder, and its effect on the global workforce is resultantly significant. However, the fact of the matter is the absence of notable technological breakthroughs and the fact that the technology presently available is reactive, meaning it tackles the symptoms of the attack after the attack has occurred. The requirement for this paper is, therefore, the provision of an innovative approach, and this paper will describe the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 946–960 Read article