Search
30 articles for “Freundlich”
-
Adsorption Isotherms for the Removal of Heavy Metals from Aqueous Solution Using Groundnut Shell and Rice Husk
Abstract: Heavy metals are considered as hazardous to the environment due to their toxicity even at low concentration. Batch experiments were conducted to know the potentiality of agricultural byproducts (Groundnut shell, Rice husk and combined adsorbents) on removal of heavy metal ions. It has been found that the percentage of adsorption increases with increase in pH and decreases with the increase in metal ions concentration. The obtained results showed that the …
Published in Journal of Water Pollution & Purification Research · Vol. 1, Issue 3, 2014 · pp. 1–12 Read article
-
Removal of 2,4-diclorofenoxyacetic Acid (2, 4–D) with Carbonized Peanut Shell
Abstract: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 Removal of 2,4-diclorofenoxyacetic acid (2, 4–D) has been studied using carbonized peanut shell (CPS). The effects of experimental parameters such as the initial pesticide concentration, contact time and temperature were evaluated. The concentrations of solutions of 2,4-D used were 0.4 and 0.6 mg/L and the temperatures were 25, 35, 45 and 55 °C. Some adsorption isotherms such as the Langmuir and …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 3, Issue 1, 2012 Read article
-
Polymer Composite-Supported Jackfruit Peel Adsorbent for Enhanced Copper (II) Removal from Wastewater: Batch Equilibrium and Isotherm Analysis
Abstract: The increasing concern of disposal of copper-containing effluents into the environment has led to heightened interest in designing cost-effective, eco-friendly and scalable adsorbent systems. Traditional metals and synthetically engineered sorbents prove to be effective; however, these systems are energy intensive. Agricultural residues entrapped in polymer composite systems constitute an economically feasible solution to this environmental challenge. This work reports on the design, characterization and performance evaluation of an economical adsorbent …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 375–390 Read article
-
Sustainable Approach for The Efficient Removal of Methylene blue From Aqueous Solution Using Sapindus Mukorossi Seed Powder as Biosorbent
Abstract: In this study, the adsorption of Methylene blue dye from water using Sapindus mukorossi seed powder was investigated. Batch experiments were carried out with various dilutions of Methylene blue to check the activity of reetha seed powder as an efficient biosorbent. The results showed that the seed powder was effective in removing Methylene blue from water, with a removal efficiency ranging from 88 to 99% at pH of 7, an …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 14, Issue 1, 2023 · pp. 40–46 Read article
-
Biosorption of Fluoride from Aqueous Solution Using Ulva fasciata sp.: A Marine Green Algae
Abstract: Water is a useful and vital natural resource for sustaining life and environment that we have always thought to be available in abundance and free gift of nature. Enhanced industrial activity during recent decades has led to the discharge of unprecedented volumes of industrial waste water, which is a serious cause of environmental degradation. Excessive fluoride concentrations have been reported in ground waters of more than 20 developed and developing …
Published in Emerging Trends in Chemical Engineering · Vol. 4, Issue 2, 2017 · pp. 45–53 Read article
-
Synthesis of Activated Carbon from Corn Cob and Factors Affecting its Adsorption and Desorption Efficiency of Cationic Brilliant Green Dye
Abstract: Extreme dye pollutants released from textile, leather, and pulp industries are becoming a major concern to the water. These pollutants are highly toxic to living things. The major objective of this study was to prepare low-cost and efficient activated carbon from corncob (CCAC) adsorbent through the H2SO4 activation method and characterize its suitability for removing brilliant green dye (BGD) from aqueous solution. The adsorption and desorption efficiency of the prepared …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 27–44 Read article
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Effective Removal of Widely Applicable Pesticides Using Iron Pillared Clay (Fe/Bt): Adsorption Behaviour and Kinetics
Abstract: The vast application of pesticides for agricultural purpose to enhance adequate plant growth is quite alarming, with its negative environmental influence increasing every day. The current study investigates the potential of iron pillared bentonite (Fe/Bt) for effective removal of three different widely applicable pesticides (Glyphosate, Bentazon and Diazinon) in aqueous solution. This adsorbent has been characterized ab initio by FT-IR spectroscopy. Adsorption parameters such as contact time, initial pesticide concentration …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 1, 2023 · pp. 10–20 Read article
-
Adsorption Isotherm Study for Activated Carbon Produced from Cassava Peel
Abstract: Adsorption isotherm study of Activated Carbon produced from cassava peel was carried out using phenol solution as the adsorbate. Langmuir and Freundlich isotherm models were employed for the study. Varying ratios of 1:1, 0.75:1, 0.5:1, and 0.25:1 activating agent to cassava peel were used for the formulation of the Activated Carbon. The Freundlich R2 value for the 1:1, 0.75:1, 0.5:1, and 0.25:1 formulations was 0.822, 0.979, 0.971 and 0.974, respectively. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 8–12 Read article
-
Studies on Removal of Coomassie Brilliant Blue R250(CBB) dye Usingligninas Adsorbent
Abstract: Coomassie brilliant blue R-250 (CBB), an organic dye present in wastewater effluent, affects environment by reducing the photosynthetic activity in aquatic ecosystems. CBB must be eliminated from effluent as a result. In the present study, lignin was utilized as a low-cost bio adsorbent for the removal of CBB dye employing an adsorption technique in order to minimize pollution caused by CBB dye. By studying the effect of several parameters includes …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 9–19 Read article
-
Fungal Biosorption: An Innovative Treatment Method for the Removal of Textile Dyes
Abstract: Basic fuchsin is a potential toxic, irritant and carcinogenic dye. Conventional dye effluent treatment strategies can cause extreme ecological problems. Therefore, the present study was focused on the sorption of Basic fuchsin dye by dead Aspergillus niger biomass at different pH (pH 6.0, pH 6.5, pH 7.0 and pH 7.5) from aqueous dye solution. Maximum dye removal was observed at pH 7.0 (80.42%). The equilibrium data were analyzed by employing …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 8, Issue 2, 2018 · pp. 82–89 Read article
-
Biodecolorization of Textile Dye Effluent by Biosorption on Plant Biomass and Equilibrium Modelling
Abstract: AbstractDye effluent discharge into water bodies leading to water pollution. Each textile dye process requires a different amount of dye and also it generates a different amount of effluents. Most of the physico-chemical methods are insufficient and highly expensive. Biosorption is an alternative technology for the treatment of different textile and other effluents. Aquatic plants specially water hyacinth showed a greater potential to use as biotrap for textile effluent treatment. …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 9, Issue 1, 2019 · pp. 15–25 Read article
-
Metal Tolerance Potential of A. fumigatus and Comparative Analysis of Biosorption through Control and Trained Biomass
Abstract: Heavy metal pollution in water because of the discharge of industrial effluent imposes serious environmental concerns. Copper is one of such pollutants which is are considered as toxic, non-biodegradable and persistent in nature. Removal of heavy metals through conventional treatment strategies can cause many technical problems. Filamentous fungi have the ability to accumulate significant amount of heavy metals from their environment. Therefore, the potential of resistant fungal biomass as biosorptive …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 9, Issue 2, 2019 · pp. 71–82 Read article
-
Evaluation of Agro-based Adsorbents for Oil Spill Remediation in Freshwater and Saltwater Environments: Kinetic and Adsorption Model Analysis
Abstract: Environmental pollution caused by oil spills poses significant risks to both human health and ecosystems, particularly in regions like Nigeria’s Niger Delta, where oil spills are frequent. Conventional methods for oil spill cleanup have limitations, which has prompted research into alternative, more effective techniques. This study investigates the use of agro-based materials, specifically plantain and banana species, combined with clay soil as adsorbents for oil removal in freshwater and saltwater …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 22–32 Read article
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Exploring Gelatin Film an Eco-Friendly Biomaterial: Synthesis, Characterization, and Environmental Applications
Abstract: This study explores the synthesis, characterization, and application of eco-friendly gelatin films, a sustainable and biodegradable biopolymer alternative to synthetic plastics. Synthesized via solution casting and characterized by UV-Vis spectroscopy, FTIR, and TGA, these films demonstrated excellent molecular integrity and thickness-dependent properties, with higher gelatin concentrations leading to thicker films and delayed solubility. The research highlights their significant potential in removing diverse environmental pollutants, including dyes (methylene blue, methyl orange), …
Published in Journal of Water Pollution & Purification Research · Vol. 13, Issue 1, 2026 · pp. 1–16 Read article
-
Corrosion Testing and Evaluation of Inhibitors Performance
Abstract: Choosing test methods that will analyze specific needs, like film barrier strength that real field settings is essential for the proper evaluation and development of inhibitors. The flowing loop and the bubble test are two examples of the first and second, respectively. Corrosion is measured by gravimetric, electrical noise, alternating-current impedance, potentiodynamic measurement, linear polarization and gravimetric. The inhibitors action can be analyzed in different corrosive environments. Their performance is …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 82–88 Read article
-
Removal of AB 10B from Water by Copper Oxide Nano- Particles through Adsorption: A Kinetics and Thermodynamic Study
Abstract: Copper oxide nanoparticle was synthesized by a simple method. Consequently, adsorbent was characterized by using FTIR, XRD, and SEM techniques. The study of optimized parameter contains pH, initial dye concentration, adsorbent dose and contact time. Langmuir, Freundlich and Tempkin models were pragmatic for evaluating adsorption equilibrium data of AB 10B as the adsorbent but experiment show the Langmuir model is best for it. The adsorption kinetic model study was done …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 37–48 Read article