Search
24 articles for “Flash point”
-
The Physio-chemical Analysis of waste cooking oil and butanol blends with diesel
Abstract: With the growing concerns of environmental condition and energy resources, the alternate fuel like biodiesel is the best promising fuel. In this paper the physico-chemical properties has been determined of two different bio-diesel blends (1)Waste cooking oil(WCO) with diesel (2) butanol with diesel. The waste cooking oils are subjected to a chemical process called transesterification to produce the WCO biodiesel and then blended with diesel. The steps required for production …
Published in Trends in Mechanical Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 62–66 Read article
-
Production of Disinfectant Using Aloe Vera (Aloe barbadensis miller) Plant Extracts
Abstract: This research work demonstrates the production of a disinfectant using aloe vera (Aloe barbadensis Miller) as main source of the raw material. The liquid content of the aloe vera was extracted using mechanical and unit operation mechanisms and the obtained raw material was subjected to heating to evaluate the effect of temperature on the characteristics of the physiochemical properties of pH, total ash, crude fat, fibre and protein, total carbohydrate, …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 1, 2023 · pp. 17–30 Read article
-
Performance Analysis and Emission Study of a C.I. Engine using Butanol, Biodiesel and Diesel Blends
Abstract: Biodiesel, which has been projected as an alternative to diesel fuel, can be made an attractive and viable substitute by use of a non-glyceride type of readily available, renewable and economic resources like acid oil. The production and consumption of biodiesel will increase in future due to ecofriendly, and possibility of use of existing engines of a motor vehicle without the need for major adjustments. Biodiesel and diesel fuel are …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 2, 2018 · pp. 17–22 Read article
-
SYNTHESIS OF LOCAL OIL-BASED MUD FOR NIGER DELTA WELLS USING ELAEIS GUINEENSIS
Abstract: Abstract Edible oil is produced from palm kernel (Elaeis Guineensis), a widespread tropical fruit that has a specific gravity of approximately 0.9°C, a flash point of 242°C, a flash point of 251°C, and a pour point of 22°C. This experiment was conducted by replacing liquid paraffin oil, a known component of conventional oil-based mud, with palm kernel oil (PKO) in the synthesis of a new oil-based mud from local materials. …
Published in Journal of Petroleum Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 1–12 Read article
-
Parametric Optimization of Waste Plastic Fuel Parameters
Abstract: AbstractIn this article, the fuel production through waste polythene and plastic with the help of zeolite as a catalyst is presented. First of all, prepare a light steel airtight vessel on which there is a lid with a hole that is connected to long galvanized steel pipe. The container is filled ¾ with waste plastic and polythene at room temperature then the temperature is increased up to 300–450°C by using …
Published in Journal of Thermal Engineering and Applications · Vol. 4, Issue 3, 2017 · pp. 26–30 Read article
-
Study The Effect of Metakaolin Powder in Hot Mix Asphalt as Mineral Filler
Abstract: Mineral fillers are crucial for bridging the spaces between the internal particles of the asphalt matrix. The purpose of this study is to investigate the mechanical properties of hot mix asphalt as well as the impact of utilising Metakaolin (MK) as a mineral filler. Coarse aggregate, fine aggregate, and filler are the main components of hot mix asphalt (HM). With or without modifiers, materials and asphalt binders. HMA components have …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 9–15 Read article
-
Influence of ZycoTherm Dosage on Polymer Modified Bitumen and Marshall Performance of Hydrated Lime Incorporated Warm Mix Bituminous Concrete
Abstract: This study examines the effect of ZycoTherm on PMB 76-10 binder characteristics and the performance of PMB-based Bituminous Concrete (BC) Grade-II prepared at reduced mixing temperatures, with and without hydrated lime. PMB 76-10 was modified with ZycoTherm at dosages of 0.05%, 0.10%, 0.15%, and 0.20% by weight of binder and evaluated using conventional and residue-based tests. Increasing ZycoTherm dosage decreased penetration, while softening point, flash point, and elastic recovery increased, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 256–267 Read article
-
Formation, Analysis and Characterization of Wood Pyrolysed Oil
Abstract: Pyrolysis of wood is the possible path for converting biomass to higher valuable products such as bio-oil, bio-char and bio-gas. Bio-oil or liquid bio-fuels have higher heating values, so it can store and transport more conveniently the by-products bio-char and bio-gas, which can be used to provide heat required in the process. This work is focused on the formation, analysis and characterization of bio-oil which was obtained from the mixed …
Published in Emerging Trends in Chemical Engineering · Vol. 3, Issue 2, 2016 · pp. 36–41 Read article
-
Recycling of Waste Generator Oils by Different Treatment Methods
Abstract: Engine oils with wide range of viscosities are used to lubricate an engine’s moving parts in different industrial units. Used engine oils are considered hazardous wastes because of their high content of pollutant ,thermal degradation products from the base oil and additives and combustion products from fuel and lubricant. The used oil still contains a large proportion of valuable base oil that may be used to formulate new lubricants if …
Published in Journal of Petroleum Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 103–115 Read article
-
Productions and Characterization of Biodiesel by Base Catalyzed Transesterification Reaction from Dairy Waste Scum of DEI Dairy, Agra
Abstract: With the increase in prices and rapid depletion of petroleum-based fuels, the investigation is being done to look over an alternative fuel source. Presently, the biodiesel is mainly produced from vegetable sources such as jatropa oil, karanja oil, rapeseed, soybean, and others that could overlap with nutritional requirement of the society if produced at large scale. Also, the production cost of biodiesel from vegetable and animal sources is very high …
Published in Research and Reviews : Journal of Dairy Science and Technology Read article
-
Comparative Study of Tire Oil and Cashew Nutshell Oil Biofuel Blends with Diesel
Abstract: We are going to compare Cashew Nutshell Oil (CNSO) diesel blend and Tire Oil diesel blend in this paper. Usually, Cashew Nutshell Oil is produced from the waste that is collected from cashew nut industry. Tire oil is the liquid fuel that is produced from waste tires. Many tests were going on to study the fire point of both CNSO and Tire oil blends. Kinematic viscosity is high in case …
Published in Journal of Automobile Engineering and Applications · Vol. 6, Issue 2, 2019 · pp. 7–12 Read article
-
Optimisation of Biodiesel synthesis process from various edible oils using KOH and NaOH as homogeneous catalysts
Abstract: In the present experimental study, an optimization of biodiesel production from different kinds of edible oils (Palm oil, Cotton-seed oil and Sunflower oil) using KOH & NaOH as homogenous catalyst has been investigated by one step transesterification method. The research study was conducted into two parts. In the first experimental study, different types of edible oils (Sunflower oil, Cottonseed oil and Palm oil) have been optimised using KOH and NaOH …
Published in Emerging Trends in Chemical Engineering · Vol. 11, Issue 2, 2024 · pp. 69–77 Read article
-
Tribological Assessment of Chemically Modified Jatropha Curcas Oil Developed by Addition of Graphite Nanoparticles for Biolubricant Applications
Abstract: As an alternative to petroleum-based lubricants, environmentally friendly bio-based lubricants are gaining popularity in the lubrication industry. A sustainable bio-based lubricant, Jatropha Curcas Oil (JCO) incorporates nanoparticles as additives. Nevertheless, this oil cannot be used directly as a biolubricant due to its low oxidative stability. By redesigning the oil's molecular structure through chemical modification, this restriction can be overcome. Epoxidation and oxirane ringopening were the two steps used in this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 47–58 Read article
-
An Investigation into the Quality of Distillate Diesel Fuel at Selected Service Stations in Freetown’s Western Area
Abstract: As a critical energy source for global transport and industry, diesel fuel quality is of paramount importance. This study evaluates and compares the quality of diesel fuel samples by analyzing key parameters: sulfur content, density, cetane index, and kinematic viscosity. The properties of diesel fuel samples from six (6) Fuel Stations of various Oil Marketing Companies (OMCs) are compared with National Technical specifications limits of the Sierra Leone Standards Bureau, …
Published in Journal of Petroleum Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 1–14 Read article
-
Low cost method for fuel production from Plastic waste
Abstract: There is a huge problem of plastic waste remaining bulbous, eventhough many solutions are put forth. The production of synthetic plastic has reached 400 million tons worldwide, from which 50% is thrown in landfills or recycled; 15 million tons reach seas and oceans.Inceneration and other waste management methods have many limitations, which includes hazards of secondary pollutants. And moreover, there is no more land filling space for waste accumulation. Land …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 12, Issue 3, 2021 · pp. 41–47 Read article
-
Production of liquid fuel from waste plastic using batch catalytic pyrolysis process
Abstract: Waste polystyrene from households and retailing shops are recognized to be the major sources of environmental problem. On the other hand, it represents a source of energy and valuable chemical products. Pyrolysis as a technique of chemical recycling of waste plastic is as an environmentally and economically acceptable option for converting waste plastics into useful resources. In this study, the operating conditions studied were; temperature was varied from 430 to …
Published in Journal of Catalyst & Catalysis · Vol. 6, Issue 2, 2019 · pp. 34–43 Read article
-
Recovery of Liquid Hydrocarbon Fuels from Polypropylene Waste Plastics via Catalytic Pyrolysis
Abstract: Process of pyrolysis is a thermo-chemical method conducted at high temperatures and usually in presence of catalysts. Dissimilar type of natural and synthetic catalysts are used for alteration of organic wastes into cherished fuels. The aim of this work is conversion of waste production of liquid fuel using catalyst that produced from rice husk ash. Waste plastic was pyrolyzed at temperature range 430-470oC and obtained products were liquid fuel, gas …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 1, 2020 · pp. 33–48 Read article
-
Bio-physiochemical analysis of Algae –Gasoline and Butanol-Gasoline blended fuels
Abstract: AbstractThe main objective of this paper was to formulate and identify the physiochemical characteristics of fuel blended with algae oil, butanol and gasoline. The comparison of the characteristics of algae and butanol blended with gasoline is also presented in the paper. These blends have been prepared with three different blending ratio 5%, 10% and 15%, respectively. The requirement of another source of energy is increasing rapidly as fossil fuels are …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 1, 2018 · pp. 10–16 Read article
-
Polystyrene Plastic Waste into Liquid Fuel Using Silica-Alumina Catalyst, Extracted from Rice Husk
Abstract: Catalytic Pyrolysis of Polystyrene (PS) into fuel like products using silica alumina catalyst that was extracted from rice husk was investigated over temperature range of 430–470°C. The output of catalytic pyrolysis was liquid oil, solid residues (char) and gaseous fraction. The product yields as a function of temperature, time and catalyst amount were studied. High conversion of liquid (48.8%) was achieved at 430 and 450ºC in the presence of 12.5 …
Published in Journal of Petroleum Engineering & Technology · Vol. 10, Issue 3, 2020 · pp. 15–31 Read article
-
Diesel Adulteration Detection Using Gaseous Vapor Emission
Abstract: Diesel adulteration is the illegal or unauthorized introduction of foreign substances into pure diesel,causing the product to not conform to the requirements and specifications for use in the Oil and GasIndustry. Current methods to detect diesel adulteration require chemical laboratory experiments tomeasure parameters such as density, API gravity, viscosity, flash point, and evaporation point. Thesemethods require specialized, expensive equipment and cannot be utilized be quickly and readilyemployed at point of …
Published in Journal of Petroleum Engineering & Technology · Vol. 11, Issue 1, 2021 · pp. 69–76 Read article