Search
80 articles for “FTIR analysis”
-
Development of an Environmentally Friendly Bioplastic Film Derived from Water Hyacinth
Abstract: The water hyacinth, an invasive aquatic plant negatively impacting ecosystems, serves as a promising source for raw materials in the production of carboxymethylcellulose (CMC)-based bioplastics due to its high cellulose concentration. This initiative not only mitigates water hyacinth pollution in natural water resources but also contributes to the reduction of plastic waste through the creation of biodegradable CMC bioplastic films. The cellulose extraction from water hyacinth precedes the synthesis of …
Published in International Journal of Toxins and Toxics · Vol. 1, Issue 1, 2024 · pp. 18–24 Read article
-
Advanced Functional Nanocomposites: Graphene Oxide Integration into Polyvinyl Alcohol Matrix
Abstract: This research explores how incorporating graphene oxide (GO) into polyvinyl alcohol (PVA) can improve its mechanical and thermal characteristics, with the goal of creating multifunctional nanocomposites suitable for advanced technological applications. GO was introduced into the PVA matrix at 0.5, 1, and 2 wt% via a scalable solution casting method. The resulting nanocomposites were characterized mechanically, thermally, and spectroscopically. Tensile testing revealed a significant improvement in mechanical performance, with tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 50–59 Read article
-
Synthesis of Graphene-CeO2 Nanocomposite with Enhanced Electrochemical Properties
Abstract: For the fabrication of graphene–cerium oxide (CeO₂G) composites, 99 mg of cerium oxide (CeO₂, 99.9%) was uniformly dispersed in 100 mL of deionized water via ultra-sonication (40 kHz) to achieve a stable suspension, followed by the incorporation of 1 mg of synthesized graphene. The resulting mixture was maintained at ambient temperature (25 ± 2 °C) under continuous magnetic stirring at 500 rpm for 2 h to promote effective interfacial interaction …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1355–1373 Read article
-
Characterization of Polyurethane at Multiple Scales for Erosion Mechanisms Under Sand Particle Impact
Abstract: Thin polyurethane layers have been widely used as erosion-resistant coatings on helicopter rotor blades such as UH-60 Black Hawk and Eurocopter SA 315. Published research has mainly focused on empirical studies that relate the mechanical properties such as rebound resilience and hardness of polyurethane to solid particle erosion resistance. However, polyurethane possesses phase mixing at multiple scales and thus sand particle erosion resistance depends also on the microstructure and the …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 1–13 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
Synthesis, Characterization, and Thermogravimetric Analysis of Polylactic Acid-Based Bio-Adhesive for Industrial Applications
Abstract: This study investigated the synthesis, characterization, and thermogravimetric analysis of polylactic acid (PLA)-based bio-adhesives for industrial applications. The adhesive was synthesized using an emulsion polymerization method with varying compositions of PLA and vinyl acetate. The physicochemical, mechanical, and thermal properties of the synthesized adhesives were assessed through pH analysis, viscosity measurement, peel strength evaluation, tack tests, biodegradability investigations, Fourier Transform Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), and Thermogravimetric Analysis …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 2, 2026 · pp. 39–54 Read article
-
Effect of Steam Flash Explosion Conditions on Preparation of Reed Pulp
Abstract: The effects of different steam explosion conditions on preparation of reed pulp by steam flash explosion were analyzed. Because the main factors affecting steam explosion are steam pressure, retention time and liquid-to-reed ratio, so that the effects of these conditions on the steam explosion pretreated reed straw, and constituent of reed pulp were analyzed. Reed straw samples, 2~3cm in length, were loaded into a 5L stainless steel reactor and treated …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 16, Issue 2, 2025 · pp. 115–128 Read article
-
Comparative Study of Structural, Optical, Morphological, and Magnetic Properties of BifeO3 Nanoparticles Synthesized Via Green and Chemical Methods
Abstract: BiFeO3 nanoparticles were synthesized via a green route using Strychnos nux-vomica leaf extract and a conventional chemical sol–gel method to study the effect of synthesis routes on their properties. XRD analysis confirmed phase-pure rhombohedral BiFeO3 for both samples. FTIR analysis was carried out to confirm the formation of the perovskite structure and to detect surface functional groups. FESEM analysis indicated a significant effect of phytochemicals in controlling particle growth and …
Published in Journal of Nanoscience, NanoEngineering & Applications · Vol. 16, Issue 1, 2026 · pp. 1–8 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
High-Performance Carbon Nanotube-Reinforced Biodegradable Polymer Composites for Packaging
Abstract: The growing issues concerning the properties of petroleum-based plastics on the environment increased the demand for biodegradable alternatives and polylactic acid (PLA) is one of the most promising options available. However, its poor toughness, thermal resistance, and barrier properties limit broader applications in sustainable packaging. This study reports the fabrication and characterization of PLA-based nanocomposites reinforced with carbon nanotubes (CNTs) at varying loadings (0.1-2 wt.%). Structural analysis (FTIR, XRD) confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 183–194 Read article
-
Bioinformatics-based Preparation and Characterization of Silver Nanoparticles Synthesized from Pterocarpus marsupium
Abstract: Silver nanoparticles were synthesized using Pterocarpus marsupium bark extract in combination with silver nitrate solution through a green synthesis method. Silver nanoparticles formation was confirmed by the formation of dark brown from solution of silver nitrate, where the reduction of silver ion occurs which leads to the formation of silver nanoparticles. The UV–visible spectra showed a peak at 429 nm, confirming the reduction of silver ions and the subsequent synthesis …
Published in Research & Reviews: A Journal of Bioinformatics · Vol. 11, Issue 2, 2024 · pp. 21–34 Read article
-
Experimental Investigation and Surface Morphology Study on Areca Fiber Composite Material
Abstract: Composites manufactured from areca fibers had their characteristics assessed in recent research. Shape and size were determined by cutting the stem. It takes six months to dry the fibers once they are taken from the tree stem. Because pectin, cellulose, hemicellulose, and lignin make up the bulk of it. It has great regeneration capacity and is a resource material made of wood fibers. The untreated and chemically treated fibers are …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 459–468 Read article
-
Fabrication and Characterization of Diacerein Loaded Nanosponge for Topical Delivery
Abstract: Diacerein, an anti-inflammatory drug, which comes under BCS class II, commonly used in treatment of osteoarthritis has limited by its poor solubility and bioavailability when administered topically. This study aimed to develop and evaluate diacerein-loaded nanosponges gel using varying concentrations of ethyl cellulose and polyvinyl alcohol (PVA) to enhance its delivery. Nanosponges were prepared using an emulsion solvent evaporation technique, with different ratios of ethyl cellulose (0.05-0.250%) and PVA (0.2-0.3%). …
Published in Research & Reviews: A Journal of Drug Formulation, Development and Production · Vol. 12, Issue 2, 2025 · pp. 26–46 Read article
-
Development and Characterization of Antimicrobial Polymer Composites for Food Packaging Applications
Abstract: The increasing demand for sustainable and antimicrobial food packaging materials has led to extensive research in polymer-based composites. This study focuses on developing a polyethylene terephthalate-ethylene vinyl acetate (PET-EVA) composite reinforced with metal oxide nanoparticles (MONs), including Cu₂O, ZnO, and MgO₂. These nanoparticles were selected for their antimicrobial properties and ability to enhance the functional characteristics of the composite. Structural, chemical, mechanical, and barrier properties were extensively evaluated to determine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 86–93 Read article
-
Exploring Polymer Biocomposite as a Sustainable Filter for Water Treatment
Abstract: The present study explores the utilization of polylactic acid (PLA), a renewable polymer combined with surface-modified nanocellulose (SMNC), and pectin derived from Borassus flabellifer leaves and fruits respectively. Existing methods of filtration are synthetic and affect the environment and public health at an alarming rate thereby making biopolymer-based membranes a greener and effective approach for water treatment. PLA-SMNC-pectin biofilm was fabricated using 88.5 mg PLA, 3.5% (wt. % of PLA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 594–608 Read article
-
Nano-Silica Reinforced Crosslinked Biopolymer–PCM Composites for Improved Thermal Cycling Durability
Abstract: Crosslinked biopolymer–PCM composites reinforced with nano-silica were developed to enhance thermal cycling durability, leakage resistance, and structural stability for advanced thermal energy storage applications. A starch-based biopolymer was chemically crosslinked using citric acid to create a stable polymer network, while paraffin was employed as the phase-change medium and nano-silica (1–4 wt%) served as a multifunctional inorganic reinforcement. FTIR analysis confirmed successful esterification between citric acid and the polymer backbone, indicated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1–10 Read article
-
Effect of Radiation Dose, Dose Rate and Annealing Temperature on Edible Potato Starch by Spectroscopic Methods
Abstract: Potato starch (PS) is a favorite food choice in different forms. During its storage and applications the PS is exposed to different radiations. In the present study the authors attempt to compare radiation effects (gamma and Electron beam of same radiation dose) in PS by Electron spin resonance (ESR) and Fourier transform infrared (FTIR) methods. ESR spectra of gamma irradiated PS appeared to have resolved shapes than the electron beam …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 198–209 Read article
-
Synthesis, Characterization and Dielectric Properties of Polymer Materials for Microwave Communication Applications
Abstract: The rapid advancement in wireless communication technologies has necessitated the development of advanced materials with tailored dielectric properties. Polymer materials, because of their flexibility, lightweight nature, and processing ease, are currently being used in initiatives to formulate low-dielectric materials specifically tailored for microwave communication applications. In the current investigation, the authors concentrate on the synthesis, characterization, and dielectric properties of five distinct novel polymer materials. The synthesized polymers are characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1482–1495 Read article
-
Facile Synthesis of SnO2/g-C3N4 nanocomposite for the photocatalytic degradation of Methylene Blue dye under visible light irradiation
Abstract: This work reports the nanoscale samples of pure tin dioxide (SnO₂), graphitic carbon nitride (g-C₃N₄), and their composite (SnO₂/g-C₃N₄) were successfully synthesized using the co-precipitation technique. The synthesized materials were extensively analyzed using multiple characterization techniques such as Powder X-ray Diffraction (PXRD), High-Resolution Scanning Electron Microscopy (HR-SEM), Energy-Dispersive X-ray Spectroscopy (EDAX), Fourier Transform Infrared Spectroscopy (FTIR), UV-Visible Spectroscopy, and High-Resolution Transmission Electron Microscopy (HR-TEM). Results from PXRD and EDAX confirmed …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1835–1845 Read article