Search
16 articles for “Epoxy and hardener”
-
Performance and Robustness of Wind Turbine Blades Composed of Recovered Waste Carpet Fiber Polymer Composites
Abstract: Carpets stay in good condition for ten to fifteen years, after which they wear out and are discarded. The large amount of used carpet waste is often dumped in landfills, causing health risks, air pollution, and other environmental problems. To reduce the growth of landfill sites, it is essential to implement recycling measures for carpet waste, protecting the environment by reusing these materials in new products. Carpet are made from …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 53–66 Read article
-
Mechanical and Environmental Performance of Curaua Fiber Composites: A Sustainable Alternative to Wood and PVC
Abstract: This study examines the mechanical behavior of curaua fiber composites, comparing their performance to other materials like wood and PVC. Curaua fibers, sourced from the Brazilian Amazon, demonstrate superior mechanical properties, making them a promising alternative for sustainable composite materials. The composites were fabricated using various methods and subjected to tensile, flexural, and impact tests. Results show that curaua fibers exhibit an average tensile strength of 30.7 MPa, outperforming wood …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 467–477 Read article
-
Study and Comparison of Mechanical and Thermal Resisting Property of Composite Materials Reinforced Using Natural Fibers and Filler Material as Ash
Abstract: Composite in composite material means, two or more materials combined on a macroscopic scale to form a useful material. The advantage of composite is, they exhibit the best qualities of their constituents and also some qualities that neither constituent possesses. These properties make advanced composites extremely attractive and purposeful in situations where component weight is critical. Fibers from natural and man-made sources are used to make composites. The following experiment …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 6, Issue 2, 2019 · pp. 32–38 Read article
-
FABRICATION AND COMPRESSIVE TEST ANALYSIS OF CARBON FIBRE REINFORCED NYLON
Abstract: AbstractThe aim of the paper is to study and investigate the effect of carbon fibers (T800), epoxy resin and hardener Tri Ethylene Tetra Amine (TETA) reinforced with nylon rod. There is a wrapping of carbon fiber done on the nylon rod which increases the compressive strength. It is found that compressive strength very with respect to variation of wrapping around nylon rod. The density of final material reduces as the …
Published in Trends in Opto-electro & Optical Communication · Vol. 9, Issue 3, 2019 · pp. 28–32 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Strategic Enhancement of Composite Strength Explored Through Comprehensive Integration of Flax Fiber and Cenosphere in Epoxy Resin Matrices
Abstract: The Current research delves into the mechanical attributes of composite specimens, integrating flax fiber and cenosphere fillers within an epoxy resin matrix catalyzed by K-6 hardener. Executing a meticulous approach involving a vacuum bagging method and a specific formulation of 10 wt.% cenosphere, 50% epoxy resin, and 40% flax fibers, the study rigorously scrutinized tensile and flexural strengths. Notably, the first specimen exhibited a peak tensile strength of 94.329 MPa, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 199–217 Read article
-
Experimental Exploration of Crack and Damage Dynamics of Hybrid FRP Nano Composites
Abstract: Fiber-reinforced polymer (FRP) composites have become essential materials in modern engineering structures because of their excellent strength-to-weight ratio, corrosion resistance, and adaptability in design. Among different fracture modes, Mode I interlaminar fracture where cracks propagate under tensile opening stresses is one of the most critical forms of damage in layered composites. Since delamination occurs within the matrix-rich regions between plies, improving the matrix properties plays a key role in enhancing …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 220–232 Read article
-
Material Characterization Analysis of Fiber Reinforced Composites
Abstract: The study investigates the physical characteristics of PAN carbon fabric/epoxy composite which is a material commonly utilized in aerospace, defense, and automotive sectors. The material has exceptional mechanical properties like high specific strength and hardness. The materials utilized in this experiment are T-300 PAN carbon fabric, LY556 Epoxy resin, and HY5200 hardener to create pre-preg materials. Then the laminate was pre- pregged in a die mold of identical shape matched, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 230–243 Read article
-
Experimental investigation on impact resistance and energy absorption of multicell thin walled glass fibre reinforced polymer composite
Abstract: The objective of this study is to explore the behaviour of different types GFRP cell structures under dynamic load testing. In this study we have designed, fabricated, tested and analyzed specimens of different configurations (Cylindrical structure – 1 cell, 2 cell and 4 cell) using Glass Fibre Reinforced Polymer (GFRP). GFRP constituents are Glass fibre of 200 GSM with L-12 epoxy and K-6 hardener. Test specimens were manufactured by conventional …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 85–95 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
Development and Evaluation of Hybrid Natural Fiber Composites
Abstract: Natural fiber based polymer composites are becoming more common because they are cheap, sustainable, and operate effectively across mechanical and environmental settings. Natural fibers (NFs) like bamboo and roselle are being used to strengthen polymer composites. They are being used in textiles, medical equipment construction, and car making. People are becoming more interested in these fibers because of the unique properties. Bamboo fiber is an effective option for reinforcement in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 908–915 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Experimental Evaluation of Carbon Fiber Reinforced Epoxy Composites for Structural Applications
Abstract: Composites made of carbon fibre reinforced polymer (CFRP) are currently one of the most widely used material classes in advanced engineering applications because of their remarkable environmental resistance, dimensional stability, and strength-to-weight ratio. The vacuum bag moulding method was used in this study to create CFRP laminates with different fiber-to-resin weight ratios: 50:50, 55:45, 60:40, 65:35, and 70:30. The reinforcement phase was made of unidirectional carbon fibre fabric and the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 401–415 Read article
-
Comprehensive Introduction: Epoxy and Polyurethane Floor Coatings—A Critical Evaluation for Modern Industrial Applications
Abstract: Industrial flooring systems are essential for ensuring operational durability, safety, and longevity in demanding environments. Epoxy and polyurethane (PU) coatings represent two predominant technologies, each offering distinct mechanical, chemical, and aesthetic profiles tailored to specific performance requirements. Epoxy systems, formed through the crosslinking of bisphenol-A-based resins with amine hardeners, excel in high-strength, chemically aggressive settings due to their superior hardness, adhesion, and chemical inertness. In contrast, PU coatings, synthesized from …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 13, Issue 1, 2026 · pp. 14–23 Read article
-
Structural, Magnetic and Dielectric Properties of Barium Cobalt Hexaferrite-powder and Barium Cobalt Hexaferrite- Epoxy Resin Composite Film
Abstract: The W-type barium cobalt hexaferrite powder with chemical composition BaCo2Fe16O27 was prepared using a simple heat treatment method. The precursor was calcinated at 650 °C for 3 h in a muffle furnace and then slowly cooled to room temperature in order to obtain barium cobalt hexaferrite powder. The flexible epoxy thin film of Ba-cobalt hexaferrite/epoxy composite was fabricated using the suitable amount of hardener and curing agent. Surface and morphological …
Published in Journal of Microelectronics and Solid State Devices · Vol. 1, Issue 1, 2015 · pp. 14–20 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article