Search
140 articles for “Ductile”
-
An Austempering Study of Ductile Iron and the Effect of Copper Addition on the Tensile Properties of Austempered Ductile Iron
Abstract: Austempered Ductile Iron (ADI) has proved to be an excellent material as it possesses attractive properties like high strength, ductility and toughness combined with good wear resistance and machinability. These properties can be achieved upon adequate heat treatment which yields optimum microstructure for a given chemical composition. In this work, an investigation has been conducted on ductile iron alloyed with Cu and austempered in a range of time and temperatures. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 2, 2013 · pp. 1–7 Read article
-
Microstructure and Mechanical Properties of Thin Wall Ductile Iron
Abstract: Currently many cast parts are produced in aluminum rather than cast iron, because of the drive to get high strength /weight ratio for application in automobile and aerospace. Ductile Iron casting of approximately 2-3mm section thickness better known as Thin wall ductile iron (TWDI) having high strength /weight ratio and better mechanical properties than Aluminum alloys. The effect of various parameters like, post inoculation, gating and feeding, moulding sand mix …
Published in Journal of Automobile Engineering and Applications · Vol. 4, Issue 2, 2017 · pp. 35–39 Read article
-
Design and Analysis of G+4 Building with Ductile Detailing
Abstract: This study presents the structural design and analysis of a G+4 residential building, with a specific focus on ductile detailing to enhance seismic performance. Ductility plays a crucial role in enabling structures to absorb and dissipate energy during seismic events, thereby minimizing structural damage and improving safety. The project emphasizes key reinforcement strategies such as beam-column junction detailing and confining reinforcement, which are critical to preventing brittle failures and improving …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Effect of Alloying Elements and Processing Parameters on Mechanical Properties of Austempered Ductile Iron
Abstract: In the present work, austempering is carried out for three different grades (Unalloyed, copper alloyed and Nickel alloyed) of ductile iron. After that the variation of mechanical properties (Hardness, Tensile strength and Elongation) and microstructure of the austempered ductile iron (ADI) with alloying elements (Copper and Nickel) and austempering process variables (austempering temperature and austempering time) were studied. It is found that, with increasing austempering time hardness, tensile strength and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 1, 2013 · pp. 8–16 Read article
-
Technological Progress in Thin Wall Austempered Ductile Iron: From Manufacturing to Operation
Abstract: Nowadays, aluminum is used more often than cast iron in the production of cast parts due to the desire to reduce vehicle weight. Theoretically, austempered ductile iron can be used in high strength, light weight parts because thin wall austempered ductile iron (TWADI) components can be produced with strength-to-density ratios that are comparable to those of cast aluminum. Thus, advancements in the technology of thin wall austempered ductile iron are …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 2, 2023 · pp. 38–52 Read article
-
Phase – Field Modeling of Brittle and Ductile Fracture Under Complex Loading Conditions
Abstract: Phase-field modeling has emerged as a powerful computational framework for predicting fracture behavior in engineering materials, offering a unified description of crack initiation, propagation, branching, and coalescence without the need for explicit crack tracking. This study presents an in-depth examination of phase-field modeling applied to both brittle and ductile fracture under complex loading conditions, including multiaxial stress states, cyclic loading, thermal gradients, and dynamic impact. The phase-field approach regularizes the …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 13–18 Read article
-
A Finite Element Analysis to Study the Effect of Hydrostatic Pressure on Steel Ductility
Abstract: The effect of superimposed hydrostatic pressure on percentage reduction of area (a gauge mark of the ductility) is investigated in round steel bars in tensile stress by employing a finite element analysis (FEA) with 8-node serendipity quadrilateral elements and von Mises plasticity flow rule in an elastoplastic power law hardening model. It is demonstrated that a linear relationship exists between the pressure and percentage reduction of area at any given …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 1, 2025 · pp. 41–51 Read article
-
Characterization of Fracture Toughness of As-Cast Si-Mo- Cr Ductile Cast Iron
Abstract: In the present study, a Si-Mo-Cr ductile cast iron is developed by taking three different combinations, viz. Heat-1, Heat-2 and Heat-3 of the selective amount of silicon, molybdenum, copper and chromium. For fracture toughness characterization, the specimens are prepared from the samples in "as-cast" conditions. The value of static fracture toughness obtained from the experiments for the specimen of Heat-2 with a fatigue pre-crack is 54.49 MPa√ , whereas, for …
Published in Journal of Polymer & Composites Read article
-
Seismic Analysis of Ductile Detailed Reinforced Concrete Structure for SMRF with & without Shear Wall with reference to IS13920:1993(Old Code) & IS13920:2016(Revised Code).
Abstract: Abstract The occurrence of earthquake has increased recently causing severe damage to human life and property. Hence accurate seismic analysis of structure is needed to be carried out considering all the parameters of the building. There are two methods for seismic analysis one is static and the other is dynamic method i.e. Seismic Co-efficient method for static analysis and Response Spectrum method for dynamic analysis of the building. In this …
Published in Journal of Structural Engineering and Management · Vol. 5, Issue 2, 2018 · pp. 74–80 Read article
-
Optimization Of Mechanical Properties Of 500/7 Grade Ductile Cast Iron (DCI) By Using SMAW: Applications In Reinforced Composites And Thermoplastics Through Taguchi & GRA
Abstract: Welding, a critical manufacturing process, is broadly engaged to join metals and thermoplastics using heat, pressure, or both. This study inspects the Shielded Metal Arc Welding (SMAW) method to optimize welding parameters and improve the mechanical properties of Ductile Cast Iron (DCI) grade 500/7, a material widely used in high-strength and thermal conductivity applications in aerospace and automotive sectors. Using an L9 OA (orthogonal array), experiments were conducted on nine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 204–222 Read article
-
Steel Ductile Detailing of Moment Resisting Frames for Pre-engineered Buildings
Abstract: Long span structures with no interrupting column are necessary in any type of industrial structures and pre-engineered buildings (PEB) satisfies this need along with less time and cost as compared to conventional structures. This methodology is adaptable not only due to its quality pre-designing and prefabrication, but also due to its light weight and economical construction. The concept includes the technique of providing the best possible section according to the …
Published in Journal of Structural Engineering and Management · Vol. 3, Issue 1, 2016 · pp. 36–44 Read article
-
Investigation of Mechanical Properties in Ductile Iron with Alloyed and Unalloyed at Time and Temperature on Austempering
Abstract: Due to the combination of its numerous excellent mechanical qualities, the flexible iron has been used more and more since its invention in 1948. To develop significantly improved characteristics, the unnecessary investigation is being done. The most recent development in the field of flexible iron, or SG iron, is Austempererd malleable iron. At four different temperatures, two different types of spheroidal graphite (SG) cast iron samples with varying copper weight …
Published in Journal of Polymer & Composites · Vol. 11, Issue 9, 2023 · pp. 1–9 Read article
-
Enhancing Fire Performance of Steel Reinforcement in RCC Structures: A Comprehensive Investigation
Abstract: The assessment, repair, and rehabilitation of fire-damaged structures have become crucial due to the rise in significant building fires.This particular field necessitates proficiency in various domains including concrete technology, material science and testing, structural engineering, and repair materials and processes. Researchers and developers are currently engaged in extensive efforts to tackle the challenges related to improving the fire resistance of steel reinforcement in reinforced concrete (RCC) structures. These endeavors involve …
Published in Journal of Structural Engineering and Management · Vol. 10, Issue 1, 2023 · pp. 33–40 Read article
-
An experimental study on flexural behavior of RC beams of Alccofine based engineered concrete infusing steel fibres
Abstract: The innovations in concrete being engineered to the specific requirements have found a new dimension under sustainability. Alccofine is a sustainable construction material derived from GGBS. The primary objective of the study is to explore the potential of Alccofine particles in varying proportions in combination with 0.5% steel fibers to uplift the flexural strength of the engineered concrete. As concrete is known to be a brittle material once hardened, exhibits …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 87–97 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Simulation and Analysis to Reduce the Shrinkage Defect in Sand Casting for the Rotor: A Review
Abstract: Casting is a process in which the metal is melted and poured into mold and allows it to solidify to get desired shape. Objective of investigation is to review on simulation and analysis to reduce the shrinkage defect in sand casting. In ductile iron casting, shrinkage defect is common. It is generally seen at the last solidifying area of casting. Other parameters like getting system, feeder, metallurgy of material, part …
Published in Journal of Production Research & Management · Vol. 7, Issue 3, 2017 · pp. 23–26 Read article
-
Computation of the Necking in Bars Without Geometrical Imperfection
Abstract: This paper presents a finite element analysis to compute the neck profiles of smooth, circular cylindrical bars in shear-free grip under uniaxial tensile load. The analysis uses 4-node quadrilateral element with linear displacement variation, as well as 8-node Serendipity quadrilateral element with curved sides and a quadratic variation of the displacement field, for power law hardening materials that follow von Mises plasticity. All the elements are based on isoparametric formulation. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 2, Issue 2, 2024 · pp. 10–19 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article