Search
100 articles for “Contact analysis”
-
Contact Stress Analysis of Needle Roller Bearing Used in Synchromesh Gear Box
Abstract: The optimum selection of a bearing generally depends on particular application such as to transfer loads between the rotating and stationary members, and to permit free rotation. From among the wide range of bearings available in the market today has various considerations, such as the load-carrying capacity, the life of the bearing, and the working rotational speed need to be considered before a suitable bearing can be selected. Here for …
Published in Trends in Machine design · Vol. 5, Issue 1, 2018 · pp. 5–20 Read article
-
Incorporating Material Fatigue Parameter Determine in The Rolling & Sliding Contact Fatigue Analysis of Gears
Abstract: As the material's intricate stresses and strains are always shifting during phases of loading, determining the predicted equipment working under rolling-sliding contact loads and their fatigue lives (wheels, bearings, and gears) is particularly difficult. Another difficulty is not knowing the precise characteristics of the material used to make the components, which is particularly noticeable. when it comes to heat-treated components, where the material characteristics' values can differ greatly among the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 1–5 Read article
-
Bending Stress Analysis of Involute Helical Gear and Wildhaber-Novikov Gear
Abstract: This paper presents a bending stress analysis for Wildhaber-Novikov circular-arc gear (W-N gear) and involute helical gear. Bending stress analyses performed are under continuous load transmission during rotation using finite element method. Using CATIA V5 R19, three dimensional W-N gear and involute helical gear are modeled by considering same number of teeth, module, helix angle, pressure angle and face width. Then nonlinear contact analysis was conducted on involute helical gear …
Published in Journal of Mechatronics and Automation · Vol. 1, Issue 2, 2014 · pp. 17–21 Read article
-
Multipoint Deflection Analysis using Non-Contact Image-Based System
Abstract: Abstract: In this paper, the experimental study proposes a non‐contact image‐based system for multipoint deflection measurement through image processing based on a low‐cost consumer‐grade camera. Deflection monitoring is one alternative method that can become the indicators of bridge feasibility since this method is easy, effective, and can be used for multi-temporal application. The objective of this study is to determine the deflection of simply supported beam of span 1.2 m …
Published in Recent Trends in Sensor Research & Technology · Vol. 6, Issue 1, 2019 · pp. 13–17 Read article
-
Two-dimensional Finite Element Analysis of Bolted Flanged Joints
Abstract: A 2D axisymmetric finite element analysis of flanges has been carried out using ANSYS 7.1 version. The analysis consider gasket as a rigid material for contact analysis and the others where the gasket has been considered as a gasket element. The non-linear behaviour with two unloading curves was used to predict the non-linear behaviour. This paper attempts to study and compare the contact pressure, gap, gasket stress and gasket total …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 60–65 Read article
-
Performance Analysis of Fully Flexible Organic Humidity Sensor with Top-Contact and Bottom-Contact OTFTs
Abstract: Abstract: Organic field-effect transistor (OFET) based humidity sensors are extensively used nowadays due to their low cost, mechanically flexible and compatibility with lower temperature fabrication techniques that support the plastic substrate based device and circuit applications. This paper investigates the humidity dependence of performance of organic humidity sensor with Top-Contact and Bottom-Contact OTFTs. Subsequently, impact of channel length on sensor performance is analyzed. The humidity sensitivity of organic sensor drain …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 1, 2019 · pp. 26–34 Read article
-
Non-Contact Quantification of Swelling-Induced Deformation in Polymer Hydrogels Using Image Analysis
Abstract: Swelling of polymer hydrogels governs transport, mechanics, and functional performance in biomedical systems, yet it is often reported using bulk ratios that conceal spatially heterogeneous deformation and boundary-driven instabilities. This study presents a non-contact image-analysis framework to quantify swelling-induced deformation by tracking shape and boundary evolution from time-lapse imaging. The approach segments the hydrogel region, extracts a sub-pixel refined contour, and computes boundary displacement descriptors including mean and upper-percentile normal …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1499–1509 Read article
-
Development of Novel Polymeric Articulating Papers for Enhanced Occlusal Contact Assessment in Dentistry
Abstract: Traditional articulating papers, a mainstay in occlusal analysis, often exhibit limitations in consistency and difficulty with quantitative data analysis. This study explores the development of novel articulating papers utilizing advanced polymeric materials. These novel papers aim to address the shortcomings of traditional options by potentially improving: (1) sensitivity and resolution for capturing occlusal contacts, (2) consistency and reproducibility of contact readings, and (3) durability and reusability. The successful development of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1004–1011 Read article
-
Gear-Related Stress Analysis and Comparison Between the Fem and Agma Standards
Abstract: In many different devices, gears enable the efficient transfer of motion and torque. They are an essential component of modern mechanical power transmission systems. It has been demonstrated that bending and surface contact stresses at the gear tooth are the primary causes of gear failure, despite their widespread use. Too much stress can lead to tooth wear, pitting, or breakage, which can ultimately reduce the operating life and reliability of …
Published in Trends in Mechanical Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 13–18 Read article
-
High-Performance Biodegradable Films from Bamboo Derived Cellulose Nanofibers and Silk Fibroin: Engineering Sustainable Polymer Composites
Abstract: This research presents the advancement of biodegradable composite films from cellulose nanofibers (CNFs) extracted from bamboo and silk fibroin (SF) derived from Bombyx mori cocoons. CNF/SF composites were fabricated in three different compositions—CS10, CS30, and CS50—via aqueous blending and solution casting, followed by ethanol-induced β-sheet stabilization. Mechanical testing confirmed a considerable enhancement in tensile strength from 72 MPa (CS10) to 112 MPa (CS50), while Young’s modulus improved from 2.4 GPa …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 256–265 Read article
-
Thermo-Mechanical Behavior and Intelligent Optimization of Contact Temperature During Ultrasonic Vibration-Assisted Single-Pole Magnetic Abrasive Finishing of Zinc Alloy
Abstract: This study proposes a new integration of the experimental analysis, multi-physics finite element modelling (FEM) and machine learning (ML) optimisation of contact temperature (CT) in ultrasonic vibration-assisted single pole magnetic abrasive finishing (UV-SPMAF) of zinc alloy. The three gaps of the research are addressed: (i) The absence of a multi-physics FEM model that can couple electromagnetic, thermal and structural fields for UV-SPMAF of zinc; (ii) No quantified contribution of the …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
Components under rigorous usage of Railway track
Abstract: Risk evaluation of railway rolling stock failures by fatigue are enacted by failure mode, effects and criticality analysis (FMECA) technique. Studies are measurement, evaluation of reliability, availability and maintainability related to components of diesel loco engine. Failure investigations have included railway loco to diesel engine gear train consisting of crankshaft and camshaft gears in auto trucks. Finite element simulations of failure analysis of crankshaft as well experimentation have determined fatigue …
Published in Trends in Transport Engineering and Applications · Vol. 6, Issue 3, 2019 · pp. 20–28 Read article
-
Advanced Polymer Nanocomposite EEG Electrodes for Enhanced Epileptic Seizure Detection: A Comparative Analysis
Abstract: Electroencephalography (EEG) has been very important in the detection of epileptic seizures so as to enable successful diagnosis, surveillance and therapy of epilepsy. Nevertheless, EEG electrodes based on traditional metals may be limited due to high or high contact impedance, lack of biocompatibility, discomfort to patients and prone to motion artifacts, which interfere with signal quality and diagnostic adequacy. The recent progress in material science has resulted in coming up …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 Read article
-
A Comprehensive Study on Improving Contact Lens Performance Through Various Approaches
Abstract: Contact lenses improve vision quality by correcting refractive errors and thus provide a convenient alternative to traditional eyeglasses. Apart from vision enhancement, they have multiple applications in cosmetics, drug delivery, and therapeutic use. The performance of these lenses depends on various factors such as material, design, fitting, and interaction between the lens and the eye. The selection of appropriate materials is crucial for maintaining optimal eye health. Properties like oxygen …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 211–222 Read article
-
Axial Compression Behavior of Aluminum (Al), Glass/Epoxy (GFRP) and Hybrid Al-GFRP Crash-box: An Experimental and Digital Image Correlation Approach
Abstract: The study aims to understand the axial compression characteristics and fracture of cylindrical Aluminum (Al), Glass/epoxy (GFRP) composite and Hybrid Al-GFRP crash-boxes. The hollow Al tubes are fabricated by rolling and bonding a thin aluminum sheet followed by rivet joints. The GFRP samples are manufactured using the wet-hand layup technique followed by the vacuum bagging method. Hybrid samples are manufactured by covering GFRP tubes with aluminum sheets on the outer …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 304–313 Read article
-
Heavy Metal Removal from Textile Industrial Effluent using Banana Exocarp Derived Cellulose Acetate Graphene Nanocomposite Membranes
Abstract: The disposal of textile effluent is responsible for serious human health concerns and above all environmental concerns to all kind of species. This indicates that there is immediate and urgent need of emerging, efficient with sustainable recycling technologies. In this paper, banana exocarp as agriculture-based waste, in terms of substrate was utilised as major raw material. The extracted cellulose from the substrate with homogeneous acetylation process, transformed into cellulose acetate …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 51–62 Read article
-
Analysis of Hydrodynamic Characteristics of a Squeeze Film in O-Ring Assembly Under the Oscillating Motion
Abstract: In the most of the non-contacting face seals, squeezing occurs in the fluid film between the O-ring surface and the mating surfaces in the gland assembly. Therefore, hydrodynamic characteristics are easily simulated by considering a fluid film between a rubber surface (O-ring surface) and a rigid surface (machined surface). In this paper, effects of surface roughness of rubber block on leakage flow rate and hydrodynamic force developed in fluid film …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 2, 2015 · pp. 1–12 Read article
-
Design, Analysis and Experimental Study of Worm and Worm Gear Pair for Plug Valve Application
Abstract: The present work deals with the design procedure, load carrying capacity, mathematical modelling,analysis of worm and worm gear for plug valve application. The plug valves are used in various fluidservices applications. It performs well in slurry applications. It is also used in air, gaseous servicesand oil piping systems and a like applications. In plug valve the main and important function of theworm gear drive is to reliably transmit torque and …
Published in Trends in Machine design · Vol. 8, Issue 1, 2021 · pp. 11–20 Read article
-
Analysis of C45 Steel Machining with Differentiated Tool Bits
Abstract: The tool material may be coated or uncoated, and cutting inserts are typically situated along the covered contact region. Work piece remains fixed while tool revolves for cutting and machining. Objective: A NABL-accredited metallurgical evaluation laboratory (machining) assessed two specimens. Machining profile and materials determine insert selection. Analytical results show material composition. The surface qualities of samples 1 and 2 were examined. As DOC, cutting speed and tool tip temperature …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 244–252 Read article
-
Simulation of Electrostatic Microactuator with Two-Sided Electrodes
Abstract: Microcantilevers are the basic MEMS structures, which can be used as both sensors and actuators. The objective of this work is to study the concept of two-way deflection of the cantilever due to applied voltage and the ground. The proposed work is carried out by using Comsol/Multiphysics software which is based on the finite element method (FEM). The proposed work is modeled and simulated by selecting electromechanics as the physics …
Published in Journal of Mechatronics and Automation · Vol. 2, Issue 1, 2015 · pp. 10–15 Read article