Search
151 articles for “Concrete structures”
-
Limestone Calcined Clay Cement (LC3) as a Sustainable Cementitious Composite for Retrofitting Concrete Structures: A Systematic Review
Abstract: This systematic review evaluates the effectiveness of Limestone Calcined Clay Cement (LC3) as a sustainable material for repairing and retrofitting damaged concrete structures. LC3 is highlighted as a low-carbon alternative to Ordinary Portland Cement (OPC), offering improved strength, bonding, and long-term durability. The review compiles and analyzes data from peer-reviewed experimental studies focusing on LC3’s mechanical performance, interface bonding, and durability parameters. Results consistently show higher bond strength, reduced shrinkage, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 163–174 Read article
-
Graphene-Derived Reinforced Polymer Composites for Self-Healing and Durability Enhancement in Concrete Structures
Abstract: This study presents a matrix-centric polymer-composite repair binder: an epoxy–polyamide network reinforced with graphene derivatives (GO/rGO, 0.1–1.0 wt%). The polymer drives function via segmental mobility that closes microcracks, while 2D-filler topology densifies the interphase, improves load transfer, and enforces tortuous moisture pathways. Adhesion was high: pull-off (ASTM D4541) reached 13.5 MPa at 2.0 mm displacement; slant-shear (ASTM C882) reached 12.1 MPa at 2.8 mm, with greater deformation capacity (zero stress …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 77–91 Read article
-
AI-Integrated Graphene-Modified Polymer Interfaces for Real-Time Crack Detection and Autonomous Healing in Smart Concrete Structures
Abstract: This study presents the design and development of a graphene-reinforced multifunctional polymer composite interface engineered for structural reinforcement, self-sensing, and autonomous healing applications in cementitious systems. A thermosetting polymer matrix embedded with graphene nanoplatelets (0.25–1.5 wt.%) was developed to establish a conductive polymer nano-composite network. Electrical characterization confirmed a distinct percolation threshold at ~0.6–0.8 wt.%, beyond which a sharp increase in conductivity was observed due to the formation of interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 30–42 Read article
-
Strengthening of RC Structures Using CFRP-Near Surface Mounted Technique
Abstract: This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 304–313 Read article
-
Analytical and Statistical Analysis of Reinforced Concrete Frame Structure Subjected to Blast Loading
Abstract: Blast loading represents one of the most hazardous and destructive forces that structures may encounter throughout their life span. Understanding and mitigating the effects of such loading is crucial for ensuring the safety and resilience of buildings. This study focuses on analyzing the behavior of reinforced concrete (RC) frame structures when subjected to blast loading, with the aim of informing more robust and resilient building designs. The research specifically examines …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 2, 2024 · pp. 84–91 Read article
-
Investigation of Chopped Basalt Strands for Concrete Beams Structures
Abstract: The current work unveils a sort of strategy for hacked basalt strands supported for cement footers. The material used to develop the bars are hacked basalt fiber, waterway sand, coarse total and fine total. In this the mechanical and flexure conduct of basalt fiber with differing rate to be utilized to test the crystal and advanced esteem is use to project the pillar. Absolutely six bars is projected out of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 233–240 Read article
-
Effect of Heat Exposure on Structural Integrity of Geopolymer Concrete Composites
Abstract: The research evaluates the thermal degradation effects of high temperatures on Geo Polymer Concrete Composite (GPCC) by examining alccofine concrete, concrete made with alccofine and porcelain waste aggregates. Knowing how GPCC behaves under high temperatures proves essential for protecting buildings during fires as well as industrial applications. Each mix design received composite concrete samples that underwent increased heating conditions from 100°C to 700°C at 200°C intervals. Post-heating, various parameters were …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 318–328 Read article
-
A Comprehensive Survey of Structural Applications for Concrete-Filled Steel Tubes
Abstract: A composite section made from a hollow steel tube after concrete has been poured inside of it is known as Concrete filled steel tube. CFT is a high-performance component that combines the impact of steel confinement with the design freedom of concrete. It resists applied stress by fusing concrete and steel. The interaction of steel tubes and concrete gives CFST its strength, and as a result, it has become more …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 184–196 Read article
-
Evaluating the Structural Performance of Concrete with Partial Replacement of Fine Aggregate by Plastic Waste
Abstract: This work evaluates the performance of concrete incorporating plastic waste as a partial replacement for fine aggregate, at replacement levels of 0%, 5%, 10%, 15%, and 20%. Various tests were conducted on fresh and hardened concrete to assess workability, strength, and durability. The slump cone and compaction factor tests were used to measure workability, yielding a slump range between 25–30 mm and a compaction factor of 0.98, indicating medium workability. …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 69–75 Read article
-
Structural Integrity Analysis of Reinforced Concrete Frames Under Progressive Collapse Scenarios
Abstract: This study examines how a tall reinforced concrete (RC) frame may gradually collapse under several column removal situations, such as edge, end, center, zigzag, and two-column failures. The study assesses the structural reaction based on displacement, inter-story drift, and Demand–Capacity Ratio (DCR) using nonlinear static pushover analysis carried out in ETABS. According to the analysis, the frame's stability is seriously jeopardized when two nearby columns and end columns are removed, …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 3, 2025 · pp. 1–15 Read article
-
A Comprehensive Examination of the Compressive Test Results of Concrete Formulations Modified by The Insertion of Ceramic Powder and High-Density Polyethylene Illustrates Nuanced Changes in the Structural Performance Attributes of the Resultant Composite Materials
Abstract: It is becoming crucial to transition from a traditional, utilization-based society to a sustainable one, resulting of the decline in the natural environment, depletion of natural resources, and decreased capacity for final waste disposal. As the populatio grows, so will the demand for concrete. The major goal of this research is to look at the possible technical benefits of using extruded recycled high-density-polyethylene (HDPE) fibers into structural concrete. The mechanical …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 193–205 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Degradation of Building Materials by Corrosive Pollutants
Abstract: Fiber reinforced polymers (FRP) is used for the corrosion suppression of reinforced concrete structures (RCS). One of the main issues with reinforced concrete constructions is corrosion. It interacts with acids, alkalis and salts to produce disintegration in building materials components. Pollutants and effluents speed up disbanding inside and outside reinforced structures. Bio-wastes come in contact of building materials to develop miro and macro-organism and these organisms release acid substances to …
Published in International Journal of Minerals · Vol. 2, Issue 1, 2025 · pp. 15–24 Read article
-
Erthquake Response of Shear Wall Integrated Step-Back Set-Back Structures on Sloped Ground
Abstract: The study examines how well step-back set-back structures perform seismically when they are resting on a 27° slope in terms of base shear, maximum story displacement, story drift, and time period. Shear walls 200 mm thick are positioned at various points. The seismic performance of the square plan structure having shear wall at corner locations is presented in this study. The study's findings indicate that the shear wall's position affects …
Published in Journal of Geotechnical Engineering · Vol. 11, Issue 2, 2024 · pp. 22–31 Read article
-
Formulation of Load Chart Table for Precast Prestressed Double Tee Slab
Abstract: The increasing demand for office buildings, shopping malls, industrial facilities, and residential structures underscores the necessity for rapid construction systems. Among these, precast concrete structures have gained traction in the construction industry, with beam-to-column/wall connections playing a crucial role. Precast prestressed T-slabs, primarily used as floor slab elements, offer advantages such as longer spans (up to 12 m to 15 m) and simplified construction processes due to their one-way slab …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 1, 2024 · pp. 42–53 Read article
-
Impact of Polypropylene Fibres on the Properties of Concrete
Abstract: This review paper explores the effects of polypropylene fibres on the mechanical and structural properties of concrete. The integration of short, discontinuous fibres into plain concrete enhances its post-cracking behavior and overall performance, with notable improvements in tensile strength, fracture strength, toughness, impact resistance, and flexural strength. These fibres effectively control crack propagation, increase energy absorption, and improve durability under varying loading conditions. A comprehensive analysis of prior research highlights …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 55–60 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Construction Sequence Analysis of High-Rise Structure with Creep and Shrinkage Effect
Abstract: This study deals with a time-dependent analysis of reinforced concrete G+40 RC frame structures considering the construction sequence with the effect of creep and shrinkage analysis. Because of the non-mechanical deformations induced by the time-dependent deformations of concrete, concrete structures usually present different behaviors when the construction sequences are changed, despite having the same structural configurations. Therefore, the time-dependent effects of concrete such as creep and shrinkage must be taken …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 10–25 Read article
-
Design and Analysis of G+4 Building with Ductile Detailing
Abstract: This study presents the structural design and analysis of a G+4 residential building, with a specific focus on ductile detailing to enhance seismic performance. Ductility plays a crucial role in enabling structures to absorb and dissipate energy during seismic events, thereby minimizing structural damage and improving safety. The project emphasizes key reinforcement strategies such as beam-column junction detailing and confining reinforcement, which are critical to preventing brittle failures and improving …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 2, 2025 · pp. 1–9 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article