Search
20 articles for “Concrete cubes”
-
A Study On Improving The Performance Of Concrete Using Coconut Fibers
Abstract: The aim of this study is to explore the incorporation of coconut fiber into M30 grade concrete and assess its impact on the strength characteristics. A literature review of different fibers is conducted and highlighting the working parameters. This research focuses to explore the efficacy of employing coconut fibers as micro reinforcement in concrete. The investigated properties encompass the compressive strength of the coconut fibers reinforced concrete (CFRC) at different …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 2, 2024 · pp. 26–36 Read article
-
Experimental Study of Modified M20 Concrete with Waste Plastic Polystyrene Cubes
Abstract: The study of this research paper deals with the effectiveness of waste plastics used in concrete construction. The M20 concrete specimens were mixed with waste plastic material like polystyrene as cubes of different sizes such as 5, 6, 7, 8, 9, and 10 cm and were tested for their compressive strength. The standard size of waste plastic concrete specimens was 15 cm × 15 cm × 15 cm with the …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 14–19 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
An Experimental Investigation of High Performance by Using Steel and Polypropylene Fibres
Abstract: This study explores the feasibility of partially substituting conventional cement in concrete with steel and polypropylene fibers to improve mechanical performance and introduce alternative composite materials. Concrete cube specimens measuring 150 × 150 × 150 mm were cast with varying mix designs corresponding to M20 and M25 grades. The experimental program was executed in two distinct phases. In Phase I, control mixes of M20 and M25 grade concrete were prepared …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 3, 2025 · pp. 7–13 Read article
-
Enhancing Compressive Strength of M25 Grade Concrete Using Ceramic Tiles Waste and Waste Fiber Metal: A Path Toward Sustainable Construction
Abstract: This study explores the use of Ceramic Tiles Waste and Waste Fiber Metal as partial replacements in M25 grade concrete, focusing on their impact on compressive strength. Various combinations of waste materials were tested to determine the optimal mix proportions. Compressive strength tests were conducted on concrete cubes incorporating 0.30%, 0.40%, and 0.50% Waste Fiber Metal with varying percentages of Ceramic Tiles Waste ranging from 20% to 50%. The results …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 13–19 Read article
-
Influence of Cementitious and Aggregate Replacements on the Compressive Strength of Pervious Concrete
Abstract: Pervious concrete is a sustainable construction material designed to enhance stormwater management while maintaining adequate mechanical strength. This study investigates the compressive strength of pervious concrete cubes with various cementitious and coarse aggregate replacements. The research examines the effects of fly ash, silica fume, steel slag, and rubber chips on compressive strength at 7 and 28 days of curing. The results indicate that moderate fly ash replacement enhances compressive strength, …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 9–14 Read article
-
An Experimental Investigation of Impact of Polyproplene as a Partial Replacement in Concrete
Abstract: India, as a developing nation, will require high-strength and high-performance concrete for future infrastructure projects. Fibrous concrete, which incorporates fibers to enhance structural integrity, is one such material that could meet these demands. With different concrete fibrous materials, shapes, distributions, orientations, and densities, fibrous concrete takes on different characteristics. Polypropylene is a lightweight synthetic fiber that enhances the structural strength of concrete and helps prevent the formation of cracks. In …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 1–6 Read article
-
Cementing Sustainability: Utilizing Waste Foundry Sand to Enhance Concrete Performance and Reduce Environmental Impact
Abstract: The incorporation of waste foundry sand into concrete production represents an environmentally conscious and cost-effective approach. This method involves substituting discarded foundry sand for a portion of traditional fine aggregates in concrete mixtures. The primary objective is to address environmental concerns associated with waste disposal while simultaneously achieving cost efficiency in construction materials. By integrating waste foundry sand into concrete, this practice promotes sustainability by reducing landfill waste and conserving …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 13–21 Read article
-
Experimental Evaluation of Strength in Bacterial Concrete Mixtures
Abstract: The incorporation of bacteria into concrete, through the process of Microbiologically Induced Calcite Precipitation (MICP), offers a promising approach to enhancing the mechanical properties and durability of concrete. This research explores the effect of bacterial addition on the compressive strength, split tensile strength, flexural strength, and workability of concrete. Specifically, three bacterial strains—Bacillus megaterium, Bacillus subtilis, and Pseudomonas aeruginosa—were used in varying concentrations (10⁴, 10⁵, and 10⁶ cells/ml) and incorporated …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 61–69 Read article
-
Optimizing Concrete Strength and Sustainability: Quarry Dust and Copper Slag Powder Additives
Abstract: This research investigates the potential of quarry dust and copper slag powder additives to enhance the strength and performance of concrete. Compressive strength tests were conducted on mortar cubes at 7 and 28 days to evaluate the effects of these additives. The results indicate significant improvements in compressive strength over time, with Mix A4 achieving a remarkable 43.42% increase in strength at 28 days. Other mixes also demonstrated substantial strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 1, 2024 · pp. 1–6 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Properties of Concrete with Reinforcement Eggshell Powder As Cement
Abstract: Many people choose concrete because of its reputation for durability and dependability. Concrete is not only strong and consistent, but also energy efficient, design flexible, cheap, and generally ecofriendly. In addition to protecting natural ecosystems, stable civilizations often make plans for further industrialization and urbanization. As long as it is utilized in a compositionally flexible and ecologically friendly way, concrete may be used to create aesthetically stunning structures. Inadequate domestic …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 46–52 Read article
-
Experimental Study on Replacement of Cement and Fine Aggregate with Marble Dust and Copper Slag
Abstract: With the ever-growing challenge of managing escalating waste materials globally, this paper explores sustainable solutions in construction through the utilization of marble dust and copper slag. The rapid generation of waste poses severe environmental and health threats, necessitating innovative strategies for responsible waste management. Local availability and the potential to enhance concrete strength make marble dust and copper slag attractive candidates for the partial replacement of cement and fine aggregate. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 169–176 Read article
-
Sustainable High-Strength Concrete: A Study on M60 Mixes with Alccofine as Supplementary Cementitious Material
Abstract: Concrete, which combines cement, water, aggregates, and admixtures to create a flexible material that solidifies into stone-like strength, is the foundation of contemporary building. Because of its versatility, it can be used for anything from pavements to skyscrapers, but typical mixes require large amounts of cement, which increases manufacturing costs and CO2 emissions. This study investigates the use ofAlccofine 1203, a powder made from ultrafine slag, as a partial substitute …
Published in Recent Trends in Civil Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 33–41 Read article
-
Assessing the Influence of Aggregates and Cement Type on the Properties of Roller-compacted Concrete
Abstract: Roller-compacted concrete (RCC) pavement is suitable for heavy traffic and harsh environment. In the present investigation, RCC slab samples have been prepared using two types of aggregates (crushed and rounded), and two types of cement binder (ordinary Portland and sulphate resistant). Cubes and beam specimens have been extracted from the slab samples with the aid of diamond saw. Specimens were tested for bulk density, ultrasound pulse velocity, compressive and flexural …
Published in Trends in Transport Engineering and Applications Read article
-
Analysis of Fibre Reinforced Beams
Abstract: There has been research into the flexural behaviour of composite beams with a variety of fibre layer depths, all of which were designed using the balancing section and the limit state design idea. The fibre depth is estimated to be 112 mm (d = 112 mm), with the first three dimensions being 94.44 mm (d1 = 94.44 mm), 46.12 mm (d2 = 22.35 mm), and 22.35 mm (d3) respectively. The …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 53–59 Read article
-
Enhancing Strength and Durability: A Study of Mortar Blocks with Steel Slag Incorporation and the Development of Steel Slag Lime and Cement Blocks
Abstract: This study is focused on investigating the strength and durability properties of mortar cubes made with slag cement and incorporating Ultra Fine Steel Slag (SS) as a potential replacement for natural fine aggregates (FNA). In some instances, the cement was entirely replaced with hydrated lime to develop the blocks. A battery of tests, including assessments of compressive strength, acid resistance, sulfate resistance, water absorption, and void analysis, were carried out …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 233–246 Read article
-
Structural Health Monitoring of Polypropylene Fiber- Reinforced Composite Using Accelerometer Sensors
Abstract: This study explores the application of accelerometer sensors for structural health monitoring (SHM) in evaluating the performance of polypropylene fiber-reinforced composites (PFRC). Incorporating polypropylene fibers into concrete enhances its structural integrity and durability. However, accurately assessing PFRC behavior under various conditions is crucial for its practical application in construction. This research employs advanced accelerometer sensor technology for real-time monitoring and assessment of PFRC performance. Experimental investigations captured and analyzed the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 621–634 Read article
-
Comparative Evaluation of the Pozzolanic Activity of Artificial Pozzolans: Steel Slag, Fly Ash, and GGBFS
Abstract: Evaluating the pozzolanic activity of specific industrial waste is crucial given the growing demand for cementitious materials. This research aims to expand the possibilities of incorporating pozzolanic waste such as Steel Slag (SS) as additives to cement. SS is a byproduct of the steel production process. A byproduct of the steelmaking process, slags have long been used as aggregates in building materials like concrete and roads. A closed-loop structure and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 341–361 Read article