STM Journals Peer-reviewed research from Consortium e-Learning Network

Journal of Construction Engineering, Technology & Management Original Research

Optimizing Concrete Strength and Sustainability: Quarry Dust and Copper Slag Powder Additives

  1. Naveen Sharma Sanjeev Agarwal Global Educational University, Bhopal,
  2. Harsh Rathore Sanjeev Agarwal Global Educational University, Bhopal,

Abstract

This research investigates the potential of quarry dust and copper slag powder additives to enhance the strength and performance of concrete. Compressive strength tests were conducted on mortar cubes at 7 and 28 days to evaluate the effects of these additives. The results indicate significant improvements in compressive strength over time, with Mix A4 achieving a remarkable 43.42% increase in strength at 28 days. Other mixes also demonstrated substantial strength gains, highlighting the effectiveness of quarry dust and copper slag powder additives in promoting both early and long-term strength development. These findings contribute to the advancement of sustainable and high-performance concrete materials, offering insights into their practical application in construction projects.

Keywords

References (85)

  1. Douglas, E, Bilodeau, A & Malhotra, VM 1992, ‘Properties and durability of alkali-activated slag
  2. concrete’, American Concrete Institute Materials Journal, vol. 89, no. 5, pp. 509–516.
  3. El-Mahllawy, MS 2008, ‘Characteristics of acid resisting bricks made from quarry residues and
  4. waste steel slag’, Construction and Building Materials, vol. 22, no. 8, pp. 1887–1896.
  5. Felix, F, Udoeyo, Philibus, U &Dahibil 2002, ‘Sawdust ash as concrete material’, Journal of
  6. Materials in Civil Engineering, vol. 14, no. 2, pp. 173– 176.
  7. Frank, P & Nichols 1982, ‘Manufactured sand and crushed stone in portland cement concrete’,
  8. International journal of Concrete, vol. 4, no. 8, pp. 56–63.
  9. Galetakis, M, Alevizos, G &leventakis, K 2012, ‘Evaluation of fine limestone quarry by-products,
  10. for the production of building elements-an experimental approach’, Construction and Building
  11. Materials, vol. 26, no. 1, pp. 122–130.
  12. Gemma Rodriguez de Sensale, 2006, ‘Strength development of concrete with Rice-Husk Ash’,
  13. Cement and Concrete composites, vol. 28, pp. 158– 160.
  14. Gengying Li & Xiaohua Zhao 2003, ‘Properties of concrete granulated blast furnace slag', Cement
  15. and Concrete Composites, vol. 25, pp. 293–299.
  16. Goni, S, Lorenzo, P & Sagrera, JL, 1994, 'Durability of hydrated portland cement with copper slag
  17. addition in Nacl+Na2SO4 medium', Cement and Concrete Research, vol. 24, no. 8, pp. 1403–1412.
  18. Goni, S, Lorenzo, MP & Guerrero, A 2002, 'Activation of pozzolanic reaction of hydrated portland
  19. cement fly ash pastes in sulphate solution', Journal of American Ceramic Society, vol. 85, no. 12,
  20. pp. 3071–3075.
  21. Gorai, P, Jana, RK &Premchand 2003, ‘Characteristics and utilization of copper slag a review’,
  22. Resources, Conservation and Recycling, vol. 39, pp. 299–313.
  23. Harvey Alter 2004, 'The composition and environmental hazard of copper slags in the context of
  24. the basel convention', Resources, Conservation and Recycling, vol. 43, pp. 353–360.
  25. Hossain, KMA &Lachemi, M, 2007, 'Strength, durability and microstructure aspects of high
  26. performance volcanic ash concrete', Cement and Concrete Research, vol. 37, pp. 759–766.
  27. Huang, K 2001, 'Use of copper slag in cement production', Sichuan Cement, no. 4, pp. 25–27.
  28. Hwang, CL &Laiw, JC 1989, 'Properties of concrete using copper slag as substitute for fine
  29. Aggregate', In: Proceedings of the 3rd International Conference on Fly Ash, Silica Fume, Slag, and
  30. Natural Pozzolans in Concrete, no. 114–82, pp. 1677–1695.
  31. Hwee, YS & Rangan, BV 1990, 'Studies on commercial high strength concrete', American Concrete
  32. Institute Material Journal, vol. 87, pp. 440– 445.
  33. Ilangovan, R & Nagamani, K 2006, 'Studies on strength and behavior of concrete by using quarry
  34. dust as fine aggregate'. Civil Engineering and Construction Review Journal, New Delhi, pp. 40–42.
  35. Ilangovan, R, Mahendran, N & Nagamani, K 2008, 'Strength and durability properties of concrete
  36. containing quarry dust as fine aggregate', ARPN Journal of Engineering and Applied Sciences, vol.
  37. 3, no. 5, pp. 1819–6608.
  38. IS :4031 (Part 4)- 1988, Indian Standard “Methods of Physical Tests for Hydraulic Cement,
  39. Determination of Consistency of Standard Cement Paste, Bureau of Indian Standards, New Delhi,
  40. IS: 10080–1982, Specification for Vibration Machine for Standard Cement Mortar Cubes, Bureau
  41. of Indian Standards, New Delhi, India.
  42. IS: 10262:2009, Guidelines for Concrete Mix Proportioning, Bureau of Indian Standards, New
  43. Delhi, India.
  44. IS: 10262–1982 and SP 23:1982, Recommended Guidelines for Concrete Mix‘,Bureau of Indian
  45. Standards, New Delhi, India.
  46. IS: 13311(Part 1)-1992, Methods of Non-Destructive Testing of Concrete Ultrasonic Pulse Velocity,
  47. Bureau of Indian Standards, New Delhi.
  48. IS: 1727 – 1967, Indian Standard. Methods of Test for Pozzolanic Materials, Bureau of Indian
  49. Standards, New Delhi.
  50. IS: 2386–1997, (Part 1 to 8), Indian Standard Methods of Test for Aggregate for Concrete, Bureau
  51. of Indian Standards, New Delhi.
  52. IS: 3085–1965, Method of Test foe Permeability of Cement Mortar and Concrete, Bureau of Indian
  53. Standards, New Delhi.
  54. IS: 383–1970, Specifications for Coarse and Fine Aggregates from Natural Sources for Concrete,
  55. Bureau of Indian Standards, New Delhi, India.
  56. IS: 4031 (Part 10)–1988, Indian Standard Method of Physical Test for Hydraulic Cement
  57. Determination of Drying and Shrinkage ‘, Bureau of Indian Standards, New Delhi, 2000.
  58. IS: 4031 (Part 6)–1988, Methods of Physical Tests for Hydraulic Cement, Part 6: Determination of
  59. Compressive Strength of Hydraulic Cement (Other than Masonry Cement), Bureau of Indian
  60. Standards, New Delhi.
  61. IS: 4031(Part 5)–1988, Indian Standard “Methods of Physical Tests for Hydraulic Cement,
  62. Determination of Initial and Final Setting Time, Bureau of Indian Standards, New Delhi.
  63. IS: 4032–1985, Indian Standard Method of Chemical Analysis of Hydraulic Cement, Bureau of
  64. Indian Standards, New Delhi.
  65. IS: 456–2000, Plain and Reinforced Concrete – Code of Practice is an Indian Standard Code of
  66. Practice. Bureau of Indian Standards, New Delhi.
  67. IS: 456–2009, Indian Standard Code Practice for Plain and Reinforcement Concrete, Bureau of
  68. Indian Standards, New Delhi
  69. IS: 8112 – 2013, Indian Standard Code Practice for Ordinary Portland Cement, 43 grade
  70. Specification, Bureau of Indian Standards, New Delhi
  71. IS: 516–1959, Indian Standard Methods of Test for Strength of Concrete, Bureau of Indian
  72. Standards, New Delhi, 1999.
  73. IS: 5816 –1999 Method of Test Splitting Tensile Strength of Concrete, Bureau of Indian Standards,
  74. Isa Yuksel & Turhan Bilir 2007, 'Use of industrial by–product to produce plain concrete elements',
  75. vol. 21, no. 3, pp. 686–694.
  76. Isa Yuksel, Turhan Bilir & Omer Ozkan 2006, 'Use of granulated blast– furnace slag in concrete as
  77. fine aggregate', Materials Journal, vol. 103, no. 3, pp. 203–208.
  78. Ishimaru, K, Mizuguchi, H, Hashimoto, C, Ueda, T, Fujita, K & Ohmi, M 2005, 'Properties of
  79. concrete using copper slag and second class fly ash as a part of fine aggregate', Journal of Society
  80. Material Science, vol. 54, no. 8, pp. 828–833.
  81. Jack, M, Chi, Ran Huang & Yang, CC 2002, 'Effects of carbonation on mechanical properties and
  82. durability of concrete using accelerated testing method', Journal of Marine Science and Technology,
  83. vol. 10, no. 1, pp. 14– 20.
  84. Jones, MR & Magee, BJ 2002, 'A mix constituent proportioning method for concrete containing
  85. ternary combinations of cements', Magazine of Concrete Research, vol. 54, no. 2, pp. 125–139
Support