Search
61 articles for “Compensation time.”
-
Fuzzy Logic Controlled Shunt Active Power Filter for Constant Frequency Aircraft Power System in Balanced and Unbalanced Loads Conditions
Abstract: Synchronous reference frame technique for extracting reference currents for shunt active power filters has been assessed for 400 Hz aircraft electric power system. From that point forward, its performance has been compared when optimized using fuzzy logic control. Critical analysis of comparisons of the compensation ability of these two techniques based on THD and compensation time will be done, and suggestions will be given for the selection of the best …
Published in Journal of Aerospace Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 79–88 Read article
-
Comparative Critical Analysis of Control Techniques Optimized using ATS Algorithm and Conventional Control Techniques Applied in Shunt Active Power Filter for Total Harmonic Reduction for Power Electronic Converters in High Frequency (400 Hz) Aircraft Sys
Abstract: Three different conventional control strategies used for extracting reference currents for shunt active power filter and optimization of these strategies using Adaptive Tabu Search have been compared and their performances have been evaluated under different balanced and unbalanced loads connected together. The compensation ability of different control strategies will be compared, and suggestion will be given for optimum. Simulation results using MATLAB have been included. Keywords: Active powers filter (APF), …
Published in Journal of Aerospace Engineering & Technology · Vol. 5, Issue 3, 2015 · pp. 44–52 Read article
-
Genetic Algorithm Application in Shunt Active Power Filter Applied in Constant Frequency Aircraft System
Abstract: Constant Instantaneous Power Control(CIPC) technique for extracting reference currents for shunt active power filters have been optimized using Genetic Algorithm and its performances have been compared. The delicate analysis of assessment of the compensation ability based on THD and compensation time will be done, and commendations will be presented for the preference of technique to be used. The simulated results using Simulink model are shown, and they will indubitably demonstrate …
Published in Journal of Aerospace Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 44–50 Read article
-
Comparison of Aircraft System using Fuzzy Logic Control and Traditional Control Scheme
Abstract: Sinusoidal current control (SCC) strategy is used for hauling out reference currents. This technique has been reviewed for More Electric Aircraft (MEA) system. Further, SCC strategy’s compensation capability has been compared with the system optimized using FLC. The basis for comparison is Harmonic distortion and compensation time. Result based on MATLAB Simulink will prove the effectivity of the control strategy for SAF in the MEA system.Keywords: More electric aircraft system …
Published in Journal of Aerospace Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 34–42 Read article
-
Design of Disturbance Observer for Third- Order Interval Plants
Abstract: This paper outlines the development of a disturbance observer (DOB) specifically tailored for third-order interval plants, which are distinguished by uncertainties in their parameters. Utilizing an interval-based modeling approach, this design effectively captures variations in system dynamics, providing robust control solutions for plants with parameter uncertainties. The key focus is creating a disturbance observer capable of real-time estimation and compensation for external disturbances and model uncertainties. The proposed DOB is …
Published in Trends in Electrical Engineering · Vol. 14, Issue 3, 2024 Read article
-
Versatile CNC Machine for Tabletop Use Enhanced with Machine Learning Integration
Abstract: In the realm of tabletop multipurpose CNC machines, the integration of machine learning represents a groundbreaking advancement potentially revolutionary in the field of desktop manufacturing. This research explores the seamless incorporation of machine learning algorithms into tabletop CNC machines to enhance their capabilities, performance, and user experience. Through case studies and examples, we demonstrate the profound impact of machine learning integration in key areas of CNC machining, such as accurate …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 353–361 Read article
-
Intelligent Power Quality Enhancement Strategies for PV-Integrated Smart Distribution Networks: A State-of-the-Art Review
Abstract: The rapid integration of photovoltaic (PV) systems into modern power distribution networks has introduced significant challenges related to power quality. Issues such as voltage fluctuations, harmonic distortion, flicker, and reactive power imbalance arise due to the intermittent and nonlinear nature of solar energy generation. This paper presents a concise literature review of various power quality enhancement techniques employed in PV-integrated networks. Key approaches include the use of active power filters …
Published in International Journal of Electrical Power and Machine Systems · Vol. 4, Issue 1, 2026 · pp. 30–53 Read article
-
Transient Stability Comparison for an Integrated Power System Using Statcom and SVC
Abstract: Transient stability control plays a significant role in maintaining the stable operation of power systems in case of large disturbances and faults. This paper compares the role of Static Synchronous Compensator (STATCOM) and Static Var Compensator (SVC) in mitigating the fault and establishing transient stability in a 9 MW integrated wind farm power plant. SVC and STATCOM are FACTS (Flexible Alternating Current Transmission System) devices used for efficient power flow …
Published in Research & Reviews : Journal of Physics · Vol. 8, Issue 2, 2019 · pp. 112–116 Read article
-
An Analysis of Optical Transmission System using Fiber Bragg Grating (FBG) with Power Optimization and Dispersion Compensation
Abstract: AbstractThe Fiber Bragg Grating (FBG) is a low cost filter for wavelength selection and also has low insertion loss. We know that Dispersion Compensation (DC) and Power Optimization (PO) are one of the most important parameters of the optical communication system. In this proposed communication model, dispersion compensation has been achieved and also we optimized almost same power at the receiver end, also we have calculated output power for different …
Published in Trends in Opto-electro & Optical Communication · Vol. 5, Issue 2, 2015 · pp. 1–5 Read article
-
Graphene–Perovskite Hybrid Opto-Electronic Modulators for Ultra-Low Power Optical Communication
Abstract: This paper proposes a novel self-adaptive neuromorphic opto-electronic transceiver architecture designed to enhance the intelligence, adaptability, and efficiency of next-generation optical communication networks. The proposed system integrates neuromorphic computing principles with photonic signal processing to enable real-time learning, dynamic resource allocation, and autonomous compensation of channel impairments such as dispersion, nonlinearities, and noise. Unlike conventional transceivers, the developed model employs spiking neural networks embedded within opto-electronic circuits to mimic biological …
Published in Trends in Opto-electro & Optical Communication · Vol. 16, Issue 1, 2026 · pp. 41–52 Read article
-
Design and Application of a Lead Compensator to a Guided Missile Control System
Abstract: Phase lead compensation is an important and reliable method for classical control design in the frequency domain for continuous time systems. This study is concerned with the design of a lead compensator using Bode plot for a laser guided missile to satisfy the required performance specifications. Simulation studies are carried out in MATLAB which shows that the compensated system meets the desired specifications.Keywords: Bode plot, missile control system, phase lead …
Published in Journal of Control & Instrumentation · Vol. 11, Issue 2, 2020 · pp. 23–33 Read article
-
Signal Drift Compensation in Polymer-Based Wearable Biosensors Using Data Processing Techniques
Abstract: Polymer-based wearable biosensors have emerged as promising platforms for continuous physiological monitoring due to their mechanical flexibility, low operating voltage, and compatibility with soft biological interfaces. However, their long-term deployment remains challenging because of signal drift caused by polymer ageing, hydration–dehydration cycles, ionic trapping, and environmental variations. These effects introduce baseline fluctuations and sensitivity degradation, which compromise the reliability and interpretability of physiological measurements. This study proposes a data-processing–driven framework …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 197–207 Read article
-
Modeling and Simulation of Feed Forward Temperature Controller with Effect of Higher Gain on Chemical Reactors Heat Exchangers
Abstract: Chemical reactors are widely used in pharmaceutical process industries. The temperature controller design is an essential part of heat exchangers (HE) design for such reactors. The goal of this research is to design and validate the Feed Forward (FF) temperature compensator for the stared tank chemical rectors. The aim is to analyze the impact of high turbulence (Gain) performance on step response. For temperature management, a transfer function (TF) control …
Published in Journal of Thermal Engineering and Applications · Vol. 12, Issue 1, 2025 · pp. 30–40 Read article
-
Self-Tuning Wireless Power Transfer System Using Reinforcement Learning for Dynamic Electric Vehicle Charging
Abstract: The rapid growth of electric vehicles (EVs) has intensified the demand for efficient, reliable, and user-friendly wireless power transfer (WPT) systems capable of supporting dynamic charging under varying operating conditions. This paper presents a self-tuning wireless power transfer system employing deep reinforcement learning (DRL) to optimize power transfer efficiency in real time. Unlike conventional WPT controllers that rely on fixed compensation parameters or predefined control rules, the proposed framework continuously …
Published in International Journal of Advanced Control and System Engineering · Vol. 4, Issue 2, 2026 Read article
-
Self-Compensation of Commutation Phase Error for Brushless DC Motor
Abstract: BLDC motors are synchronous motors powered by DC electricity via an inverter which produces an AC electric current to drive each phase of the motor via a closed loop controller. Electronic commutation is the on-and-off of the semiconductor switches at appropriate time to turn stator windings. Commutation phase ripple is generated due to the different exchange rate between outgoing phase current and incoming phase current of inverter during commutation period. …
Published in Trends in Electrical Engineering · Vol. 8, Issue 3, 2018 · pp. 72–81 Read article
-
A Real Time Analysis Of Wireless Power Transfer Coil Design For Electric Vehicle
Abstract: Wireless Power Transmission is a process that uses a vacuum or an atmosphere to transmit electrical energy. It is commonly used in the medical, industrial, and transportation sectors. However, its reliability and quality are often affected by the range and efficiency of the transmission. Electric Vehicles (EVs) have the potential to achieve better efficiency and lower emissions than internal combustion engines. However, their limited range makes them a major barrier …
Published in Recent Trends in Electronics Communication Systems · Vol. 9, Issue 2, 2022 · pp. 19–24 Read article
-
Solar Power Scavenging for Wireless Sensor Networks
Abstract: AbstractEnergy scavenging (also known as energy harvesting or ambient power) is a major challenge for scientists to overcome in small, wireless autonomous electronic devices like those used in wearable electronics and wireless sensor networks. As of today, solar energy is the cleanest vitality source available in abundance. This fact has interested the researchers, industries and consumers to develop technology that can harvest solar energy and can possibly convert to useful …
Published in Journal of Mobile Computing, Communications & Mobile Networks · Vol. 3, Issue 3, 2016 · pp. 33–41 Read article
-
Novel Laplace-domain Approach to the Electromagnetic Transients in Compensated High Voltage Power Lines
Abstract: This paper addresses the simulation of the electromagnetic transients developed in high voltage power lines, which are initiated by lightning discharges. The analysis can handle both individual and simultaneous series inductive and shunt capacitive compensation types. The sizes and locations of the compensating elements are included in the analysis. The derived Laplace s-domain mathematical model applies the concept of the ABCD transmission constants representing equivalent two-port networks. Applying the relations …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 1, 2024 · pp. 15–21 Read article
-
Electromagnetic Transients in Compensated Power Lines- Revisited: New Approach and Case Studies
Abstract: This paper addresses the simulation of the electromagnetic transients developed in high voltage power lines, which are initiated by lightning discharges. The analysis can handle both individual and simultaneous series inductive and shunt capacitive compensation types. The sizes and locations of the compensating elements are included in the analysis. The derived Laplace s-domain mathematical model applies the concept of the ABCD transmission constants representing equivalent two-port networks. The resulting currents …
Published in International Journal of Electrical and Communication Engineering Technology · Vol. 2, Issue 1, 2024 · pp. 19–26 Read article
-
Monitoring and Forecasting in Construction Projects Using Time Buffer
Abstract: The key to project management is effective performance monitoring and forecasting. The existing methods using input- output cash flow, earned value, etc. do not differentiate between work done on the critical path and work done on non-critical paths. Such methods mask the real situation and mislead the project team because progress on one path often compensate for the delay in other. The paper proposes a more effective method to facilitate …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 2, 2016 · pp. 9–16 Read article