Search
88 articles for “Alloy steel”
-
Evaluation of Optimal Parameters for Wire EDM Machine on En45A Alloy Steel using Taguchi and Grey Relational Analysis (GRA) Method
Abstract: The core goal of this research paper is to evaluate process parameters of wire electrical discharging machining and to find out the best parameter among the multiple responses given by machine. Wire cut machine is very accurate and precise machine which is actually manufactured to cut those material which have high strength, toughness, and hardness. This machine works on melting property; here spark is generated between the work piece and …
Published in Journal of Materials & Metallurgical Engineering · Vol. 6, Issue 1, 2016 · pp. 11–21 Read article
-
Machining-Induced Surface Integrity Optimization of High-Carbon Alloy Steel for Enhanced Polymer–Metal Composite Interface Performance
Abstract: The functional performance and structural reliability of polymer–metal hybrid composites are strongly influenced by the surface integrity of metallic substrates used for interfacial bonding and load transfer. In this context, machining-induced surface characteristics play a critical role in determining adhesion behavior, dimensional stability, and mechanical compatibility within composite architectures. The present study investigates the hard turning performance of a newly developed high-carbon alloy steel intended for composite-integrated structural applications, with …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1531–1546 Read article
-
Effect of Isothermal Ageing on Microstructure and Mechanical Behavior of 0.5Cr-0.5Mo-0.2V Low Alloy Steel
Abstract: Cr-Mo-V based low alloy steels are widely used in thermal power plants because of their ability to withstand elevated temperature and high pressure under continuous operation. With ferrite-pearlite and/or ferrite-bainite microstructures, these steels find their applications in boiler tubes, pressure vessels and steam turbines. Being cost effective is one of the important factors, which draws attention of many industrialists towards low alloyed steels over highly alloyed steels with austenitic matrix. …
Published in Journal of Materials & Metallurgical Engineering · Vol. 5, Issue 3, 2015 · pp. 7–14 Read article
-
Experimental Investigation on Machining Characteristics of EN19 Alloy Steel Using CNC Vertical Machining Center
Abstract: In this research work, the detailed experimentation investigation was performed for EN19 steel using milling process on CNC VMC. The experimentation strategy has been planned using Taguchi’s L9 orthogonal array, consisting of three process parameters such as cutting speed, feed rate and depth of cut on material removal rate (MRR) and surface roughness (SR). Two different types of end mill cutters (solid carbide and titanium nitride coated carbide end mill) …
Published in Journal of Experimental & Applied Mechanics · Vol. 9, Issue 3, 2018 · pp. 91–101 Read article
-
Enhancing Surface Roughness in the Taguchi Method for Turning Alloy Steel in Wet and Dry Environments
Abstract: The present investigation focuses on evaluating the performance of turning operations in alloy steel with particular emphasis on the effect of cutting parameters on surface roughness. In the machining of alloy steel, tool life and surface integrity are significantly influenced by parameters such as spindle speed, depth of cut, and feed rate. Among these, feed rate has been observed to exert the most prominent effect on surface roughness. To systematically …
Published in International Journal of Robotics and Automation in Mechanics · Vol. 3, Issue 2, 2025 · pp. 1–6 Read article
-
QUALITY IMPROVEMENT IN THE FABRICATION OF NUCLEAR VESSEL OF 20MNMONI55 LOW ALLOY STEEL
Abstract: 20MnMoNi55 is very critical material to weld, as the material is grouped into the P3 category according to the ASME Standard, which has lower weldability then other steel. The various parameters affecting the welding of 20MnMoNi55 like Welding current, welding speed, Voltage, Wire feed rate, stick out etc. should be in optimizing range. In this research paper, the attempt has been made to optimize the welding process parameter using Design …
Published in Journal of Materials & Metallurgical Engineering · Vol. 8, Issue 1, 2018 · pp. 41–48 Read article
-
Corrosion inhibitors of steel made implements
Abstract: Corrosion of steel in industrial weather is ever possible mechanism for failure by loss in weight. Of many materials steel forms most suitable property cluster for industrial infrastructure i.e. from ambient weather to acid plants. Therefore steel is to be protected from corrosion by industrial weather, which may be either by alloy formation or paints or coatings similar to paints. Alloy formation from steel with elements those produce surface adhered …
Published in Emerging Trends in Chemical Engineering · Vol. 6, Issue 2, 2019 · pp. 20–27 Read article
-
Corrosion Characterisation of Low Alloy CrMoV Steel Before and After Cryogenic Heat Therapy
Abstract: Low alloy CrMoV steel is used in Turbine wheels, Distance pieces, Compressor aft shafts etc of Gas Turbines. Cryogenic heat treatment was used to examine the effects on the corrosion resistance of low alloy CrMoV steel. In order to eliminate residual stresses and boost wear resistance in steels and other metal alloys, cryogenic heat treatment (CHT) employs cryogenic temperatures (i.e., below - 190°C) to treat work parts. Cryogenic treatment is …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 63–73 Read article
-
Optimization of Stellite Defect in Manufacturing of Engine Valves: A Review
Abstract: Intake and exhaust valves are the important components of an engine valves which are used to control flow and replacement of fuel gases inside the cylinder. This work mainly deals with defect known as stellite defect in different sizes of engine valves; and methodology adopted to prevent valve from stellite defect. Valve base material is low alloy steel (AISI 4140) and upper surface of engine valve is generally hard faced …
Published in Journal of Automobile Engineering and Applications · Vol. 3, Issue 1, 2016 · pp. 1–4 Read article
-
Effect of Process Parameters on TIG Weld-Brazing of Aluminum Alloy to Galvanized Steel
Abstract: AbstractAbility to join aluminum alloy to steel enables weight reduction of automobile bodies. Gas tungsten arc welding (GTAW) process was employed to weld-braze A8011-H14 aluminum alloy to galvanized steel in lap configuration. The influence of heat input on bead formation and joint strength was investigated. The microstructural characterization was carried out using an optical microscope and scanning electron microscope. The chemical composition was analyzed using energy dispersive spectroscopy technique. The …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 3, 2018 · pp. 8–14 Read article
-
Formability analysis of steel and copper based alloy sheet by using Erichsen Cupping Test Machine
Abstract: Metallic material formability study is critical in a variety of industrial areas, including automotive, aerospace, and manufacturing. The present study aims to investigate the formability properties of steel and copper-based alloy sheets using the Erichsen cupping test machine, an established technique for evaluating sheet metal formability. The process involves manufacturing identical steel and copper-based alloy specimens and subjecting them to the Erichsen cupping test. The test determines the maximum deformation …
Published in Journal of Polymer & Composites · Vol. 11, Issue 12, 2023 · pp. 49–57 Read article
-
Advanced Quantitative Analysis of Dynamic Recovery during Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls, and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering Read article
-
Advanced Quantitative Analysis of Dynamic Recovery During Warm Working of FCC Alloys
Abstract: Metal working processes of warm working require an advanced quantitative analysis of dynamic and static recovery of dislocations to control microstructures and crucial shape forming properties. Feasibility of dynamic recovery by thermal glide and static recovery by climb of constricted jogs, applicable to ausforming, nano bulk forming by SPD and normalizing has been addressed to design new steels, used for hulls and tribologically superior bearings. Predictive dislocation recovery analysis shows …
Published in Journal of Materials & Metallurgical Engineering · Vol. 12, Issue 1, 2022 · pp. 1–14 Read article
-
Metallurgical Perspective of Line Pipe Steel
Abstract: Over the past 30 years, severe demands have been placed on the pipe manufacturer with respect to the development and processing of materials to pipe line. Line pipe steels are put to extremely severe conditions like deep water, cold climate, corrosive and high pressure applications etc. Their quality requirements are becoming exceptionally stringent with respect to metallurgical properties i.e. cleanliness, physical and mechanical properties etc. In line with these requirements, …
Published in Journal of Materials & Metallurgical Engineering · Vol. 7, Issue 3, 2017 · pp. 20–25 Read article
-
Phase Transformation of Manganese Steel: A Role of Alloying Elements
Abstract: Low alloyed steels that are both strong and ductile are the primary focus of new material concept work due to economic considerations. One key to making good use of these materials is applying the right heat and thermo mechanical treatments. Phase transitions can be influenced by using different alloying procedures. Microstructural evolution and mechanical characteristics were investigated in relation to varying manganese, silicon, and chromium levels. Developing high-strength flat rolled …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 2, 2024 · pp. 15–20 Read article
-
Comprehensive Analysis and Investigation of Heat Treated AISI 4130 Steel on Surface Roughness in Turning Operation
Abstract: Now a days Heat treatment is one of the most important operations which alters the properties of the material such as hardness, strength, toughness, ductility, corrosion resistance, etc., and these are used according to the required material properties. These treatments are involving heating and cooling a specimen normally to extreme temperatures. These major processes are annealing, normalizing, hardening, case hardening, etc. In every process, the properties vary accordingly. Turning is …
Published in Journal of Experimental & Applied Mechanics · Vol. 13, Issue 3, 2022 · pp. 28–38 Read article
-
Optimization of Machining Parameters of EN-27 Material Using Wire Electric Discharge Machining (WEDM)
Abstract: The optimization of Wire Electrical Discharge Machining (WEDM) parameters for EN-27 alloy steel, a high-strength material widely utilized in mechanical and structural applications, is the subject of this study's methodical analysis. Due to its hardness and poor machinability by conventional methods, WEDM is preferred for achieving precise dimensional accuracy and surface integrity. The primary objective of this work is to enhance machining performance by identifying optimal process parameters influencing Material …
Published in Journal of Production Research & Management · Vol. 16, Issue 1, 2026 · pp. 32–36 Read article
-
Application of flux cored arc welding (fcaw) without pre-heating for heavy structures in ship building fabrication & construction of heavy offshore structural steels
Abstract: In fusion welding processes, the reason often given to explain the need for preheating, controlling the inter pass temperature (in multi-pass welds), and post-weld heat treatment (PWHT) is to reduce the risk of residual stresses and it can be removed by heating weldment in the heat affected zone (HAZ). Cold cracking is a hydrogen embrittlement phenomenon, often referred to as hydrogen induced cracking or HAZ cracking. During the construction and …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 20–28 Read article
-
Laser Beam Machining Techniques and Applications: A Review
Abstract: Laser beam machining (LBM) is the most common thermal energy-based non-contact, non-conventional machining process. The non-conventional manufacturing processes are used to remove extra material using a variety of mechanical, thermal, electrical, chemical, or combinations of these energies without the use of sharp cutting tools as is required for conventional manufacturing. With innovative approaches to manufacturing processes, it has transformed a number of industries. It is frequently used to machine a …
Published in Journal of Microwave Engineering and Technologies · Vol. 11, Issue 3, 2024 · pp. 28–35 Read article
-
Structural Analysis of Heavy Vehicle Chassis Using Various Geometries and Materials
Abstract: The present research investigates the significance of the automobile chassis as a crucial section of a vehicle that provides a framework for the body and other parts to rest on. It highlights the need for the chassis to have sufficient bending stiffness for the best handling qualities, as well as enough rigidity to withstand shocks, twists, vibrations, and other loads. The draft and designing model for all the sections (I, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 9–33 Read article