Search
21 articles for “Adsorption kinetic”
-
Organophilicization of Bentonite by HDTMA+ and TMPA+ Cations for Sorption of 2,4-Dichlorophenol (2,4-DCP) in Aqueous Solution
Abstract: Bentonite (Bt) was converted to organoclays by intercalation of cationic surfactants into its interlayer space. Two types of organoclays were synthesized from HDTMA and TMPA at 100% CEC, and the adsorbents were characterized by FTIR, XRD and SEM. The adsorption capacities of Bt and the organoclays for the removal of 2,4-dichlorophrnol (2,4-DCP) from aqueous solutions were tested under different conditions. Two adsorption isotherm models (Langmuir and Freundlich isotherms) were used …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 3, 2020 · pp. 22–32 Read article
-
Removal of AB 10B from Water by Copper Oxide Nano- Particles through Adsorption: A Kinetics and Thermodynamic Study
Abstract: Copper oxide nanoparticle was synthesized by a simple method. Consequently, adsorbent was characterized by using FTIR, XRD, and SEM techniques. The study of optimized parameter contains pH, initial dye concentration, adsorbent dose and contact time. Langmuir, Freundlich and Tempkin models were pragmatic for evaluating adsorption equilibrium data of AB 10B as the adsorbent but experiment show the Langmuir model is best for it. The adsorption kinetic model study was done …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 37–48 Read article
-
Isotherm and Kinetic Studies of Methylene Blue Dye Adsorption Using Sulfuric Acid Activated Nigerian Montmorillonite Clay
Abstract: The Presence of methylene blue and other basic dyes in water causes various harmful effects for both human and aquatic species. In this study, montmorillonite clay in its raw and acid (0.5M H2SO4) activated states were investigated for the sorption of methylene blue dye. The structural changes due to acid treatment were analyzed by X-ray diffraction (XRD) and scanning electron microscope (SEM). The studied parameters that affect adsorption efficiency were …
Published in Journal of Catalyst & Catalysis · Vol. 7, Issue 2, 2020 · pp. 37–47 Read article
-
Evaluation of Agro-based Adsorbents for Oil Spill Remediation in Freshwater and Saltwater Environments: Kinetic and Adsorption Model Analysis
Abstract: Environmental pollution caused by oil spills poses significant risks to both human health and ecosystems, particularly in regions like Nigeria’s Niger Delta, where oil spills are frequent. Conventional methods for oil spill cleanup have limitations, which has prompted research into alternative, more effective techniques. This study investigates the use of agro-based materials, specifically plantain and banana species, combined with clay soil as adsorbents for oil removal in freshwater and saltwater …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 22–32 Read article
-
Effective Removal of Widely Applicable Pesticides Using Iron Pillared Clay (Fe/Bt): Adsorption Behaviour and Kinetics
Abstract: The vast application of pesticides for agricultural purpose to enhance adequate plant growth is quite alarming, with its negative environmental influence increasing every day. The current study investigates the potential of iron pillared bentonite (Fe/Bt) for effective removal of three different widely applicable pesticides (Glyphosate, Bentazon and Diazinon) in aqueous solution. This adsorbent has been characterized ab initio by FT-IR spectroscopy. Adsorption parameters such as contact time, initial pesticide concentration …
Published in Journal of Catalyst & Catalysis · Vol. 10, Issue 1, 2023 · pp. 10–20 Read article
-
Adsorptive Removal of Rhodamine-B Using Eco- Synthesized Green Tea–Aluminium Nanoparticles
Abstract: This study examines the use of Green Tea–Aluminium Nanoparticles (GT-Al NPs), a unique and eco-friendly adsorbent, to remove the dangerous Rhodamine-B dye from water. For characterisation, SEM, FTIR, TGA, and EDX were employed. We evaluated the effects of pH, temperature, dosage, contact time, and initial dye concentration on adsorption efficiency. First- and second-order pseudo models were used to characterize adsorption kinetics, and the Langmuir model explained equilibrium, as well as …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 3, 2025 · pp. 61–72 Read article
-
Bio Materials and Nanotechnology: Green Tea (Waste)– Aluminium Nanoparticles (Gt-Al Nps) For Methylene Blue Adsorption
Abstract: This study examines the adsorption of Methylene Blue (MB) dye from aqueous solutions using Aluminium Nanoparticles synthesized with green tea powder as a biological reducing agent. Methylene Blue, an aromatic phenothiazine dye, is widely applied in medical diagnostics and various industrial processes, but its uncontrolled release into water bodies leads to environmental pollution due to its intense colour, stability, and potential toxicity. Therefore, identifying an efficient and eco-friendly adsorbent for …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 96–107 Read article
-
Studies on Removal of Coomassie Brilliant Blue R250(CBB) dye Usingligninas Adsorbent
Abstract: Coomassie brilliant blue R-250 (CBB), an organic dye present in wastewater effluent, affects environment by reducing the photosynthetic activity in aquatic ecosystems. CBB must be eliminated from effluent as a result. In the present study, lignin was utilized as a low-cost bio adsorbent for the removal of CBB dye employing an adsorption technique in order to minimize pollution caused by CBB dye. By studying the effect of several parameters includes …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 9, Issue 3, 2022 · pp. 9–19 Read article
-
A Parametric Study of Methylene Blue Adsorption Using Low-cost Adsorbent
Abstract: This research focused on the adsorptive capacity of activated carbonaceous substance made from the peel of Spanish cherries to remove methylene blue dye from wastewater. Through batch adsorption tests, the impact of several variables on the percentage of dye removal was examined. These variables included adsorbent preparation temperature, adsorbent dosages, initial concentration of dye solution, process time, pH of dye solution, and operation temperature. It was found that using 1 …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 3, 2023 · pp. 10–16 Read article
-
Adsorption of Methylene Blue Dye from Aqueous Solution Using Polyaniline/Xanthan Gum Nanocomposite: Kinetic and Isotherm Studies
Abstract: ABSTRACTIn the present study, adsorptive properties of polyaniline/xanthan gum nanocomposite were investigated for methylene blue (MB) dye in aqueous solution. The effects of different parameters, namely adsorption time, adsorbent dose, pH and initial dye concentration were on dye adsorption were investigated. The results revealed that a rise se in pH lead to a significant increase in adsorption efficiency. Optimum adsorption time and nanocomposite dose were obtained 60 min and 0.075 …
Published in Journal of Polymer & Composites · Vol. 7, Issue 1, 2019 · pp. 17–26 Read article
-
Effect of Temperature on Inhibitory Efficacy of Tamarindus indica fruit extract on acid corrosion of Aluminium
Abstract: An attempt has been made to investigate the anti-corrosive propensity of ethanolic extract of Tamarindus indica fruit at elevated temperature between 303 to 343 K, so as to replace the exploitation of toxic chemicals as corrosion inhibitors. Inhibition efficiency has been observed significantly high (84.06%) at room temperature at concentration 0.45 %. The inhibition efficiency is found to increase with increasing concentration of extract and decrease with rise in temperature. …
Published in Recent Trends in Fluid Mechanics · Vol. 10, Issue 3, 2023 · pp. 42–50 Read article
-
Evaluating the Influence of Temperature on the Efficacy of Capparis Decidua Extract as a Corrosion Inhibitor for Aluminium in Acidic Media
Abstract: The study investigates the anti-corrosive properties of the ethanolic extract of Capparis decidua fruit on aluminum corrosion in a 2N HCl acid solution, using a weight loss technique at temperatures ranging from 303 to 343 K. At a concentration of 0.45%, the inhibition efficiency (η%) is notably high, reaching 63.15% at 303 K. The inhibitor's adsorption behavior on the aluminum surface is consistent with the Langmuir adsorption isotherm, suggesting that …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 15, Issue 3, 2024 · pp. 58–65 Read article
-
Green Fabrication of Glutaraldehyde-Crosslinked Chitosan/PVA Biocomposite for Heavy Metal Removal from Wastewater
Abstract: Chitosan (CS) and Polyvinyl alcohol (PVA) are polymers that possess biodegradable, biocompatible, and non-toxic properties, making them suitable for wastewater treatment applications. The primary objective of this research is to chemically modify chitosan in a novel manner to enhance its ability to remove hexavalent chromium Cr(VI) from aqueous solutions. In this study, a composite material was synthesized by crosslinking PVA and CS with glutaraldehyde (GA), resulting in the formation of …
Published in Journal of Water Pollution & Purification Research · Vol. 12, Issue 3, 2025 · pp. 59–83 Read article
-
Environmental implications of Chitosan nanostructures.
Abstract: Chitosan (CS), as a biopolymer, has unrivalled chemical and mechanical modification capabilities to develop novel characteristics, functions, and applications, particularly in the manufacture of cutting-edge membrane adsorbents. Membrane adsorbents utilizing carbon starch (CS) have emerged as a viable and efficient engineering instrument for eliminating diverse pollutants from aquatic settings, including heavy metals and dyes. To date, much study has been directed towards improving the adsorptive characteristics, permeability, physicochemical stability, and …
Published in International Journal of Antibiotics · Vol. 1, Issue 1, 2024 · pp. 42–58 Read article
-
Characterization and Optimization of Neem Leaves and Moringa Seed Husk-based Composite Activated Carbon for Efficient Adsorption of Methylene Blue Dye
Abstract: The research in question was meticulously conducted within the premises of the Nigerian Liquefied Gas (NLG) Engineering laboratory, situated at the esteemed University of Maiduguri, Nigeria. This study focuses on the development and characterization of a composite material derived from neem leaves (NL) and Moringa seed husk (MSH) to adsorb methylene blue (MB) dye effluent. The synthesis process involved pyrolyzing MSH and NL at 400°C to produce MSH and NL …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 13, Issue 3, 2023 · pp. 12–22 Read article
-
Iron Ore Beneficiation through Reverse Flotation: Advances in Nanobubble-Assisted Flotation Technology for Lean Grade Ore Upgradation and Silica Removal: A Review
Abstract: The global demand for high-grade iron ore concentrates continues to surge as readily available rich ores become depleted. Iron ore beneficiation through froth flotation has emerged as a critical technology for upgrading lean-grade iron ores (typically 25–35% Fe) to produce high-quality concentrates (64–70% Fe) suitable for direct reduction and blast furnace operations. This comprehensive review examines the fundamental principles of flotation in iron ore beneficiation, with particular emphasis on the …
Published in International Journal of Minerals · Vol. 3, Issue 1, 2026 · pp. 1–30 Read article
-
Facile Fabrication and Characterization of Novel Sterculia Gum–graft-poly(n-isopropylacrylamide-co-acrylamide) Hydrogel for Efficient Removal of Cationic Dyes from Aqueous Solution
Abstract: Water is indispensable component of life. Contamination of water is a severe problem that affects human health, aquatic vegetation, and fauna. Aside from various effluents, a variety of cationic dyes generated by industrial effluents contributes significantly to water contamination. In this study, a sterculia gum graft-poly(n-isopropylacrylamide-co-acrylamide) hydrogel was made using a graft copolymerization technique with N,N′-methylene-bis-acrylamide as a crosslinker, ammonium persulphate as an initiator, and tetramethylethylenediamine as an accelerator to …
Published in Journal of Polymer & Composites · Vol. 10, Issue 2, 2022 · pp. 29–59 Read article
-
Water Chestnut Stem-Derived Biochar Supported AgNPs/AC-CTS-PVA Composite Gel for Wastewater Treatment and Potent Antibacterial Performance
Abstract: In the present study, green and efficient Ag-NPs functionalized activated carbon/chitosan-polyvinyl alcohol (AgNPs/AC-CTS-PVA) composite gel was successfully synthesized using water chestnut stem-derived biochar for wastewater treatment and antibacterial applications. The composite was characterized by FTIR, XRD, SEM-EDX, and TGA analyses, confirming the successful incorporation of crystalline Ag nanoparticles within the polymeric matrix and improved thermal stability. The material was tested regarding the removal of the dye of methylene blue (MB) …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1129–1144 Read article
-
Turning the Properties of Wastes Paper-Derived Cellulose Nanocrystals for Enhanced Erythromycin Adsorption
Abstract: This study explores the modification, characterization, and adsorption performance of waste paper-derived cellulose nanocrystals (CNCs) for the removal of erythromycin from aqueous solutions. CNCs were modified using organic acid, inorganic acid, and base treatments, and their structural changes were evaluated using FTIR, XRD, and BET analysis. FTIR confirmed the introduction of carboxyl and hydroxyl groups in acid-treated CNCs and deprotonation effects in base-treated CNCs. XRD analysis revealed that organic acid …
Published in Journal of Materials & Metallurgical Engineering · Vol. 16, Issue 1, 2026 · pp. 1–24 Read article
-
ZnO Nanostructure Shape Effects in Photocatalysis of Methylene Blue
Abstract: Nowadays, dyes are used in the food industry, textile industry, paper industry, hair coloring, light-harvesting arrays, photoelectrochemical cells, etc. Most of the dyes are nonbiodegradable, toxic, carcinogenic, and consist of organic compounds. These dye wastages are discharged into water bodies and the environment causing serious hazards to the marine ecosystem as well as the humans extensively. To treat toxic dyes traditional methods such as adsorption, activated carbon, ultrafiltration, and reverse …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 722–727 Read article