Search
93 articles for “(EP) Epoxy Resin”
-
Study the Mechanical Properties of Epoxy Resin Reinforced with Metal OxideNanoparticles
Abstract: In this research the additive effect of (Magnesium Oxide (MgO), Zirconium Oxide (ZrO2), Copper Oxide (CuO)) nanoparticles to epoxy resin as a matrix have been studied, in addition tomanufacturing hybrid composites from the same nanoparticles which are (CuO/ZrO2, MgO/ZrO2) to epoxy resin as a matrix too. The hand lay-up method is using to manufacturing the composites from the epoxy resin and the nanoparticles with different weight ratios((0, 3, 6, 9) …
Published in Journal of Polymer & Composites · Vol. 9, Issue 1, 2021 · pp. 7–12 Read article
-
Strategic Enhancement of Composite Strength Explored Through Comprehensive Integration of Flax Fiber and Cenosphere in Epoxy Resin Matrices
Abstract: The Current research delves into the mechanical attributes of composite specimens, integrating flax fiber and cenosphere fillers within an epoxy resin matrix catalyzed by K-6 hardener. Executing a meticulous approach involving a vacuum bagging method and a specific formulation of 10 wt.% cenosphere, 50% epoxy resin, and 40% flax fibers, the study rigorously scrutinized tensile and flexural strengths. Notably, the first specimen exhibited a peak tensile strength of 94.329 MPa, …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 199–217 Read article
-
Performance of Plastic-Coated Aggregates Along with Epoxy Resin in Aggressive Environment
Abstract: Construction and demolition activities are increasing rapidly therefore concrete recycling has gained importance which has not only limited the use of natural resources but also eliminated the need of disposal sites thereby saving the land and environment. These recycled aggregates from concrete recycling are being used in various constructions works like in buildings, pavements etc. In the present work natural coarse aggregates have been partially replaced with recycled coarse aggregates …
Published in Recent Trends in Civil Engineering & Technology · Vol. 13, Issue 2, 2023 · pp. 11–20 Read article
-
Investigation, Fabrication and Testing of Spur Gear Using Composite Material
Abstract: Composite materials constitute one of the favorable, efficacious material zones for tomorrow’s sustainable future through identification of materials with higher strength to weight ratio. A composite material is combination of two or more different materials with varied qualities that work together to create a material that is better than the sum of its parts. Therefore, finding some alternative material for various mechanical applications to accelerate the Indian composite industry is …
Published in Journal of Experimental & Applied Mechanics · Vol. 16, Issue 2, 2025 · pp. 1–8 Read article
-
Flexural Strength and Drilling Parameter of Natural Fiber Composites with Usage of Epoxy Resin
Abstract: An attempt that has been made to take use of the advantages offered by natural composite materials in light of the fast advancement of research and development in this field over the course of the previous two decades, from the laboratory to the factory floor. During the manufacturing process of laminates, polymer matrices are used, while cotton, jute, and sisal are utilised as reinforcing materials. Epoxy resin is used to …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 37–45 Read article
-
FLEXURAL STRENGTHENING OF PCC BEAMS WITH VARYING FIBER DENSITIES OF CARBON FIBER FABRICS
Abstract: Strengthening of concrete structures has become ineludible due to unavoidable factors such as fatigue and aggressive environmental conditions causing deterioration of concrete structures. Many researchers are turning their direction for use of various high strength and high performance concretes due to their high structural and durability properties, for the purpose of repair and strengthening of concrete structures against these aggressive conditions. One of the rehabilitation methods was used in this …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 3, 2018 · pp. 14–20 Read article
-
A POLYESTER RESIN COMPOSITE-BASED EXPERIMENTAL INVESTIGATION OF CHARCOAL PARTICLE REINFORCED GLASS FIBRE
Abstract: The mechanical characteristics of jute/E-glassfibre polyester composites were examined (AC) after theincorporation of activated carbon particles. The polyestermatrix was loaded with five different particle loading ratios(0, 5, 10, 15 and 20 percent). To increase the adhesion of jutefibres to the polyester matrix, they were treated in a NaOHsolution. Hardness, tensile, and water absorption tests wereperformed on polyester, Activated Carbon- filled polyesterand jute/E-glass fibers polyester with and without ActivatedCarbon filter. The …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 1, 2023 · pp. 57–62 Read article
-
Metaheuristic Design of Epoxy-Based Polymer Composites
Abstract: This research investigates the optimization of epoxy resin based polymer compositions in composite materials to enhance their mechanical and tribological properties for industrial applications. We examined the properties of composite materials by running experiments and optimizing these results using Firefly and five optimization algorithms to find the best steel and epoxy ratios. Our tests confirmed that higher dosages of steel powder increased materials' resistance to breaking and impacts yet lowered …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 769–791 Read article
-
Evaluation of Tensile Properties of Waste Cornhusk Fibre Reinforced Epoxy Composite
Abstract: Composite materials are generally used in various manufacturing and construction applications around the globe. Properties like lightweight, fatigue resistant, effortlessly moldable makes composites a favorable material for various applications. Composites meet various design requirements with important factor of weight reduction of the part or the product to be manufactured. This lighter materials are nowadays preferred over the conventional materials as they are helpful in absorbing the impact load and vibrations. …
Published in Trends in Machine design · Vol. 7, Issue 2, 2020 · pp. 22–24 Read article
-
Mechanical Behavior of Epoxy-Phenol Formaldehyde Hybrid Blend
Abstract: Phenol formaldehyde resin was mixed with epoxy resin in different weight fraction (10–40) wt.% to form hybrid blends which are used as a new part in engine oil tank of the cars. The mechanical properties of the new blend were studied and included: impact strength, tensile strength, compressive strength and bending resistance. Results showed improved mechanical properties of epoxy resin after adding phenol formaldehyde. Keywords: Hybrid blend, mechanical properties, phenol …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 2, 2017 · pp. 22–26 Read article
-
Enhancing Delamination Resistance in CFRP Composites through surface Functionalization of Woven carbon Fiber by CuO Nanostructures
Abstract: In order to produce a nanostructured interphase that improves the interfacial interaction with an epoxy resin matrix, copper oxide (CuO) nanostructures were hydrothermally formed onto woven carbon fibers (WCF). Hexagonal CuO nanorods were created using a two-step, seed-assisted solvothermal technique on plain woven carbon fiber. This study investigates the effects of surface modification of carbon fibers by the formation of CuO nanostructures using a hydrothermal technique on the mechanical properties …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 589–602 Read article
-
Effect of Chemical Treatment of Coir Dust on the Dielectric Behavior of Bio-waste Reinforced Polymer Composites
Abstract: The present work is focused on analyzing the effect of the chemical treatment of coir dust fibers on the dielectric properties of epoxy polymer matrix composites. Coir dust is a spongy, peat-like residue obtained from the processing of coconut husk for coir fiber .The coir dust was washed and sun dried. The dried coir dust was treated with chemicals such as HCl, CH3COOH, KOH and NaOH. An untreated and treated …
Published in Journal of Materials & Metallurgical Engineering · Vol. 2, Issue 1-3, 2012 · pp. 84–96 Read article
-
Investigation of Mechanical Properties of Jute and Bamboo Natural Fiber Composites
Abstract: Natural fibers have become increasingly popular in recent decades. Natural fiber composites are also becoming increasingly popular in a various industries, including automobiles, furniture, packaging, construction and sports. Natural fibers have several advantages over synthetic fibers, including low cost, low density, reduced damage to processing equipment, good relative mechanical properties, renewability, and biodegradability. Natural fibers were also introduced with the goal of producing lighter composites, and they have shown a …
Published in Journal of Production Research & Management · Vol. 11, Issue 2, 2021 · pp. 20–33 Read article
-
Fabrication and Evaluation of Mechanical Properties of Banana Fiber Reinforced Epoxy Composites
Abstract: Natural fiber reinforced composites are gaining attention in recent days due to eco-friendly nature, sustainability, low cost and easy availability. The natural fibers are enriched with favorable mechanical properties which diversify artificial fibers are bio-degradable, nonhazardous, light weight. In this submission, specimens of the banana fiber reinforced epoxy composites are developed to evaluate the mechanical properties. The composite sample specimens are designated with different fiber orientations using the hand lay-up …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 37–47 Read article
-
Fabrication and Testing of Physical Behavior of Coconut Shell Micro Particulate and Walnut Shell Micro Particulate Reinforced Epoxy Composites
Abstract: Enhancing the physical characteristics of high-performance materials is largely dependent on the reinforcement of polymers by microparticles. The physical behavior of polyester composites containing coconut and walnut shell microparticles was thus investigated in order to create an engineering material for industrial use. Most researchers investigated the flammability test of fiber bio-composites only. There is a possibility that two particular polymers embedded in a thermoset polymer matrix could provide the lowest …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 592–603 Read article
-
Enhancing Mechanical and Thermal Properties of Glass Fiber-Reinforced Epoxy Composites with Silicon Carbide Additives
Abstract: This study explores the production and characterization of glass fiber-reinforced epoxy resin composites enhanced with silicon carbide (SiC) as a reinforcing filler. The primary objective is to evaluate the impact of SiC on the mechanical, thermal, and morphological properties of the composites. Four different samples with varying SiC weight fractions (0%, 5%, 10%, and 15%) were prepared, keeping the glass fiber content constant. The composites were fabricated using a combination …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 69–77 Read article
-
Investigation of Inter Delamination Properties and Morphological Analysis of Natural Fiber-Reinforced Polymer Matrix Composites
Abstract: AbstractNatural fibers are strong, light weight, renewable, cheap, completely or partially recyclable, and biodegradable. The various types of natural fibers are flax, cotton, jute, sisal, kenaf pineapple, bamboo, banana, wood, etc. In this work, sisal fibers and banana fibers have been employed as the main reinforcing materials with epoxy resin as the matrix in order to increase the effectiveness of natural fiber-reinforced polymer matrix composites. In this study, it is …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 1–7 Read article
-
Investigation of Jute Mat with Waste Fish Net by Varying Matrices in Hybrid Composites
Abstract: AbstractIn this study the low cost material of multi filament waste fish net and jute fibres were incorporated as the main reinforcing materials with epoxy resin and polyester resin as the matrix in order to increase the strength of the hybrid composites. The samples were fabricated using hand layup technique. The nylon fibre of waste fish net possesses high impact strength, elasticity property and highly resistant to abrasion of chemicals …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 27–34 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article