Search
259 articles for “Fiber-reinforced composites”
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
A Review of Modifications of Cement Slurry Formulations for Carbon Dioxide Storage
Abstract: Climate action, which includes activities aimed at mitigating climate change or reducing its adverse impacts, is the thirteenth goal of the 2030 SDGs (Sustainable Development Goals). Tthe successful commercial deployment of CCS technology would heavily rely on the integrity of the cement sheath used to complete the wellbores at the CO₂ storage sites. It has been established that the cement sheath made from conventional ordinary Portland cement (OPC) is not …
Published in Emerging Trends in Chemical Engineering · Vol. 13, Issue 2, 2026 · pp. 1–21 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
A Systematic Review of Advanced Composite Materials for High-Performance Spur Gear Applications
Abstract: This is a review which provides specific and detailed information regarding the fiber-reinforced polymer (FRP) composite to replace traditional steel in high-performance spur gears with emphasis on mechanical performance, computational modeling, and experimental validation. Methods: The current literature was thoroughly investigated that includes material properties, material simulation (e.g., finite element analysis, FEA), and experimental gear testing procedures (e.g., DIN 51354, ASTM G99). Certain case studies in the aerospace and automotive …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 209–220 Read article
-
A High-Efficiency Fuzzy-Logic-Controlled Wireless Charger Enabling the Safe Integration of Electronics in Carbon Fiber Reinforced Polymer E-Bikes
Abstract: The integration of advanced electronics into structures made from carbon fiber reinforced polymers (CFRP) presents significant challenges, including thermal management constraints, electromagnetic interference (EMI), and the imperative for lightweight components. This study addresses these challenges by designing and validating a fuzzy logic-based wireless charging system specifically engineered for lightweight E-Bikes employing CFRP frames. The system mitigates thermal risks associated with the low thermal conductivity of polymer composites by implementing a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1159–1172 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Bonding Strength Characteristics of FRP Cylindrical Composites Under Hygrothermal Loading
Abstract: This study investigates the bonding strength characteristics and stress distribution patterns in fiber-reinforced polymer (FRP) cylindrical composites subjected to hygrothermal loading conditions. A four-phase cylindrical model incorporating AS-Graphite and S-Glass fibers with low modulus epoxy coating was analyzed under four distinct pressure loading conditions (25.984, 38.976, 77.953, and 155.906 MPa). Comprehensive stress analysis revealed significant variations in von-Mises stress, maximum principal stress, and minimum principal stress across fiber, coating, matrix, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 950–967 Read article
-
Review and Analysis of Biodegradable Polymer Composites for Sustainable Hotel Packaging Applications
Abstract: Given the fast expansion in the hospitality and tourism industry, the decline in single use packaging materials has greatly amplified the quantity of plastic wastes, as well as the destruction of the environment. The present review is dedicated to the design and use of biodegradable polymer composites (BPCs) as the sustainable solution to the hotel packaging. The paper will be a synthesis of recent developments in the field of natural …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 348–365 Read article
-
Study of Ablation Characteristics Carbon Fiber Reinforced Plastic with Silicon Carbide Pores
Abstract: Significant thermal stress is placed on spacecraft during atmospheric re-entry, primarily due to aerodynamic heating. This intense heat can cause severe material damage threatening the spacecraft's structural integrity. To address this challenge, efforts are focused on improving the ablation resistence of spacecraft components. In this work, carbon fiber reinforced plastic (CFRP) composites containing silicon carbide (SiC) holes are explored as a potential solution for enhancing thermal protection system. Four different …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 617–627 Read article
-
Mechanical Performance Assessment of Hybrid FRP Laminates with Carbon Fiber Core Using Experimental and Numerical Approaches
Abstract: The high strength-to-weight ratio, corrosion resistance and design flexibility of Fiber-reinforced polymer (FRP) composites have attracted considerable attention in aerospace, automotive and structural applications. This work presents an experimental and finite element study on the tensile and flexural behavior of epoxy-based hybrid FRP laminates. Five laminate configurations were manufactured, including a unidirectional carbon fiber laminate and four hybrid laminates, Kevlar–Carbon–Kevlar (K/C/K), Glass–Carbon–Glass (G/C/G), Kevlar–Carbon–Glass (K/C/G), and Glass–Carbon–Kevlar (G/C/K). For all …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Strengthening of RC Structures Using CFRP-Near Surface Mounted Technique
Abstract: This study reviews the literature on fiber-reinforced polymers (FRP) and their applications in near-surface mounted (NSM) applications. Since fiber-reinforced polymer (FRP) composites outperform many conventional steel reinforcing methods in terms of quality, they are nearly entirely dependent on advanced concrete technology. Many structures that will still be in use two decades from now have already been constructed. A portion of these structures must undergo enhancements or be replaced, as they …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 304–313 Read article
-
Effectiveness of Concrete Retrofitted with FRP Wrapping Subjected to Higher Temperature
Abstract: This work aims to provide additional insight into the behavior of fiber-reinforced polymer (FRP) laminates at high temperatures. The compressive properties of concrete coated in fiber-reinforced polymer (FRP) under elevated heat levels. The study addresses the important issue of assessing the performance of structural elements, specifically concrete columns, in the event of a fire. Recently, there has been increased interest in fiber-reinforced polymer (FRP) composite materials as a possible concrete …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 17–28 Read article
-
Critical Review on Multifunctional Polymer Composites for Weight Reduction and AI Based Battery Thermal Management in Electric Vehicles
Abstract: The rapid growth of electric vehicles (EVs) has intensified the need for advanced materials and intelligent control systems capable of improving energy efficiency, driving range, thermal safety, and overall vehicle sustainability. This paper presents a critical review of multifunctional polymer composites and artificial intelligence-based battery thermal management systems (AI-BTMS) for next-generation EV applications. Polymer composites reinforced with carbon fibers, graphene, boron nitride, nanoclays, and carbon nanotubes offer significant advantages over …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 603–619 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Thermal Stability and Impact Performance of Basalt–Carbon Hybrid Laminates in Polyimide–Phenolic Matrices
Abstract: The impact resistance and thermal stability of the advanced polymer composites are properties that are necessary for the components that are subjected to dynamic conditions, which show the overall reliability and service performance of the laminates applied in automotive structures, protective casings, etc. These properties prevent premature softening or breakdown during long-term exposure to heat. Impact resistance and thermal stability of composite laminates are studied based on fiber orientation and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 247–260 Read article
-
Influence of Nozzle Temperature, Nozzle Diameter, and Layer Height on Tensile and Hardness Characteristics of 3D Printed CF-PLA
Abstract: This research investigates the mechanical characterization of CF-PLA (Carbon Fiber-reinforced Polylactic Acid) composite material produced using Fused Deposition Modeling (FDM) technology. The study investigates the impact of different machine parameters, like nozzle temperature, nozzle diameter, and layer height, on the tensile property and hardness of CF-PLA specimens. A total of 27 samples were produced, each with different combinations of nozzle temperature (190°C, 200°C, and 210°C), nozzle diameter (0.4mm, 0.5mm, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 674–681 Read article
-
A Critical Review on Carbon Fiber Reinforcement in Various Applications
Abstract: Carbon fiber, celebrated for its outstanding mechanical properties and impressive strength-to-weight ratio, has become a critical material in various industries. This review journal, An In-Depth Study of Carbon Fiber Reinforcement in Diverse Applications, delves into the recent advancements and innovations in carbon fiber technology. The exploration includes its integration into aerospace, automotive, civil engineering, sports equipment, and renewable energy sectors. The aerospace industry leverages carbon fiber for constructing lightweight, fuel-efficient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 490–502 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Effect of Chemically Treated Plant Cellulose on Mechanical, Fatigue and Fracture Toughness Behaviour of Polyester Composite
Abstract: In this research study, the effect of chemically treated plant cellulose on the mechanical, fatigue, and fracture toughness behaviour of polyester composites was investigated. Ramie plant cellulose fibers were used as the reinforcing material, and polyester resin was used as the matrix material. Three different chemical treatment processes, namely alkalization, acetylation, and etherification, were used to adapt the superficial chemistry of the fibers and advance their compatibility with the polyester …
Published in Journal of Polymer & Composites · Vol. 11, Issue 3, 2023 · pp. 21–29 Read article