Search
219 articles for “Alum”
-
Investigation on Dry Sliding Wear Behaviour of AlSi7Mg0.3/B4C/ZrO2 Hybrid Composites using Taguchi Method
Abstract: Hybrid Aluminium/Boron carbide/Zirconium oxide (AlSi7Mg0.3/B4C/ZrO2) composites were fabricated utilizing stir casting technique by varying boron carbide content (4wt.%, 8wt.% and 12wt.%) and utilizing a fixed amount (4wt.%) of zirconium oxide particles. Optical microscopy revealed that B4C and ZrO2 particulates were dispersed uniformly in AlSi7Mg0.3 matrix. Dry sliding wear experiments were carried out utilizing the pin-on-disc tribometer with various levels of applied loads, sliding speeds and weight percentage of boron carbide …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 166–177 Read article
-
Developing an AI-Based Novel Forecasting Framework for Surface Irregularity in Metal Matrix Materials
Abstract: Surface irregularity in metal matrix materials (MMM) signifies the deviations from smoothness, influencing structural integrity and performance frequently arising from the manufacturing process along with intrinsic material characteristics that influence effectiveness. Limitations in data, model interpretability and complexity are the difficulties that impede artificial intelligence (AI) based surface irregularity in MMM. In this study, we suggested a novel framework of Gaussian regression fused multi-strategy adaptive boosting classifier (GR-MABC) for the …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 48–56 Read article
-
Heavy Metals Contamination in Groundwaters of Punjab: A Man-made Curse and its Mitigation
Abstract: The curse of heavy metal contamination in groundwaters of Punjab state is causing health hazards for the population of Punjab. It is not so much a natural disaster as its origin can be traced to a man-made crisis in Punjab. Potentially toxic elements, including high levels of Uranium (U) contamination in the Malwa belt of Punjab, Arsenic contamination in the Majha belt, and Selenium contamination in the Doaba belt of …
Published in Journal of Water Pollution & Purification Research · Vol. 11, Issue 1, 2024 · pp. 6–22 Read article
-
Tribological Study on SiC+Graphene Reinforced Al319 Composite andOptimization of Stir Casting Parameters
Abstract: The aluminium 319 (Al319) is a commonly used material for fabricating automobile components. Due to continuous friction and vibration, those components are subjected to significant wear. Therefore, it is necessary to improve the wear characteristics of this Al319. Hence, in this study Silicon Carbide (SiC) and Graphene nanoparticles (GNPs) are reinforce to Al319 via electro-magnetic stir casting method to optimize wear characteristics without its affecting mechanical properties. Various proposition of …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 105–123 Read article
-
Characterization Of Senna Occidentalis (Link.) Seed Extract
Abstract: Senna occidentalis (L.) Link commonly known as "coffee senna" or majamfari/rai dore in Hausa is a plant with a long history of traditional and medicinal uses against diseases such as inflammation, pains, and diabetes. This study presents characterization of the bioactive compounds of the seed extracts. Physicochemical analysis of seed powder was carried out following standard procedures. Qualitative phyto-chemical contents were determined for the presence and absence of major metabolites. …
Published in Research & Reviews : Journal of Botany · Vol. 13, Issue 3, 2024 · pp. 13–22 Read article
-
Approach to Examine the Effect of Atomic Number on Single – Electron System of Group III Elements
Abstract: This study investigates the ionization energy, kinetic energy, and mass relationships among Group III elements (Boron, Aluminum, Gallium, Indium, and Thallium) to provide a comprehensive understanding of their atomic and physical properties. A detailed analysis of ionization energy trends reveals that Boron exhibits the highest ionization energy, while Thallium has the lowest, consistent with periodic trends influenced by increasing atomic radius and electron shielding. Gallium deviates slightly from this trend …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 01–09 Read article
-
Analysis of Thermal Performance Improvement of Engine Fins by Varying the Materials and Profiles Used at High Temperatures
Abstract: In this thesis, we will design fins using various profiles and materials to identify the optimal combination for a 100cc engine. We will also test different materials for fins to evaluate the engine's heat efficiency. Our study will involve a comparison between the optimized fins and the original aluminum fins currently used. To ensure the optimal performance of the 100cc engine, we will utilize advanced analytical software to thoroughly analyze …
Published in International Journal of Energy and Thermal Applications · Vol. 2, Issue 1, 2024 Read article
-
Influence of Center Cut Geometry and Power Law Index on the Free Vibration of Functionally Graded Shells
Abstract: This study explores the influence of power law variations and center cut geometries on the vibrational characteristics of functionally graded material (FGM) shells using finite element analysis (FEA). Stainless steel-alumina oxide (Al2O3) composites serve as the FGM, offering a unique blend of ceramic heat resistance and metallic toughness. Power law functions within APDL tailor material properties across the shell thickness. The research investigates vibrations under various boundary conditions (CCCC, CCFF, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 194–209 Read article
-
An Overview of New Coastal Research Vessel (N-CRV) Dry Dock and Construction
Abstract: A New Coastal Research Vessel (N-CRV) is a specialized ship designed for scientific research in fields like oceanography, geology, biology, and atmospheric studies, equipped with specific facilities and accommodations for sea missions. This paper discusses the coastal research ship dry-dock, construction, and design process, which involves three stages: concept, preliminary, and contract design. N-CRV must utilize scientific cruise, Exclusive Economic Zone (EEZ) survey, deployment, data collection, and seawater sample collection …
Published in Journal of Offshore Structure and Technology · Vol. 11, Issue 3, 2024 · pp. 1–11 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Synthesis and Photoluminescence Dynamics of Europium (III) and Terbium (III) Co-doped of GdSrAl3O7 Color-Tunable Nanophosphors
Abstract: A series of Europium (III) and Terbium (III) co-doped GdSrAl3O7 color-tunable nanophosphors were synthesized by a simplistic, streamlined and self-propagating, urea-assisted solution combustion synthesis process. The structural and luminescence characteristics of synthesized Eu3+/Tb3+ co-doped Gadolinium Strontium Aluminate nanocrystalline phosphors were validated using powder X- ray diffraction (PXRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X- ray analysis (EDAX), and photoluminescence spectra studies. The morphological studies revealed that …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 1069–1082 Read article
-
Effect of Drilling Process Parameters on Surface Roughness of LM6/B4C/Fly Ash Hybrid Composites
Abstract: This research seeks to assess the effect of process variables such as feed rate (FR), spindle speed (SS), drill material (DM) and reinforcement (R%) on surface roughness (SR) when drilling LM6/B4C/Fly ash hybrid composites. The stir casting process was used to fabricate the LM6/B4C/Flyash hybrid composites utilizing LM6 aluminum alloy as the matrix material and B4C/Fly ash as strengthening materials. Experiments were carried out using an L18 orthogonal array (OA) …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 898–906 Read article
-
Properties of Binary Waste Based Geopolymer Concrete Composite: A Review
Abstract: Concrete composite as construction material is utilized all over the world and it is not considered as eco-friendly because cement is provided as a binder in it. Therefore, replacing binder in concrete composite by alumina and silica rich by-products in presence of chemical activators give rise to geopolymer concrete composite which is eco-friendly in nature. Geopolymer concretes composite can be used to build a variety of structural configurations, have a …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 44–52 Read article
-
A Review of Embodied Energy Strategies to reduce the carbon emissions in Sustainable Buildings
Abstract: Buildings in India account for almost one-fifth of the nation's carbon emissions, making it the third- largest carbon emitter globally. These emissions are expected to climb by 50% over the next 20 years, which is the biggest increase of any nation. You would have to go into a jungle to avoid concrete, steel, and aluminium since they are so common. Just these three substances are responsible for 23% of the …
Published in International Journal of Architectural Design and Planning · Vol. 3, Issue 1, 2025 · pp. 18–27 Read article
-
A Review on Materials and Working Process Parameters of Selective Laser Sintering
Abstract: The potential for additive manufacturing technology to replace some of the current conventional manufacturing methods makes it one of the research and development fields that is expanding quickly. With additive manufacturing, three-dimensional physical models are produced layer by layer from computer-aided design (CAD) models. Fully dense metal things may be produced more rapidly and accurately with additive manufacturing. The Selective Laser Sintering (SLS) procedure uses powder bed fusion, in which …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 522–529 Read article
-
Finite Element Analysis of Multiwall Carbon Nanotubes Enabled Single Lap Joint
Abstract: This study uses finite element analysis (FEA) to examine the strength of adhesively bonded single lap joints with and without Multiwall Carbon Nanotubes (MWCNT) added to the adhesive. Shear strength analysis is performed by applying a tensile load that generates shear stress at the overlap between the two substrates bonded with adhesive. Aluminum (Al-Al) substrates were used, and single-lap joints were prepared following ASTM standards. Specimens with identical overlap and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 195–203 Read article
-
Investigation of Mechanical Behaviour in Brake Shoe Liner by Using Composite and Nano Materials
Abstract: The mechanical performance of the brake shoe liners dictates the safety and efficiency of the vehicles; thus, brakes are very vital in ensuring controlled deceleration and stopping. In the past few decades, composites have significantly impacted the automotive industry through lighter, stronger, and sturdier alternatives to traditional materials improving overall performance. Nano additives are of key importance in such composites, improving not only the mechanical properties but, more significantly, the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 280–295 Read article
-
Studies on the antioxidant content and antimicrobial activity of cucumber (cucumissativus) peel collected from bagmari, kolkata, west bengal, india
Abstract: Cucumber (Cucumis sativus) is widely consumed across the globe, yet its peels are commonly discarded as waste, despite possessing a wealth of bioactive compounds. Recent studies have highlighted that these peels contain substantial amounts of antioxidants, antibacterial, anti-inflammatory, and anti-carcinogenic properties, making them a promising candidate for value-added applications. In this study, methanolic extracts (80% v/v) of cucumber peels were systematically analyzed to assess their total phenolic content (TPC), total …
Published in Emerging Trends in Metabolites · Vol. 2, Issue 2, 2025 Read article
-
ANN Approach to Forecasting the Strength of Nano Silica Incorporated Geopolymer Composite
Abstract: Coal and steel industry by-products, such as fly ash (FA) and blast furnace slag (GGBS), have gained significant attention as precursors for geopolymer concrete (GPC) due to their high aluminosilicate content, offering a sustainable alternative to conventional cement. Nano silica (NS), recognized for its exceptional pozzolanic activity and ability to refine microstructure, has shown potential to enhance the mechanical and durability properties of GPC. This study investigates the influence of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 267–278 Read article
-
The Silent Mineral: Structural Complexity and Industrial Utility of Natural Kaolin
Abstract: Kaolin, a naturally occurring aluminosilicate clay predominantly comprising the mineral kaolinite (Al₂Si₂O₅(OH)₄), exhibits a 1:1 layered silicate structure that imparts distinctive physicochemical properties suitable for extensive industrial utilization. Deposits of kaolin are broadly classified into primary (residual) and secondary (sedimentary) categories, each defined by their geological origin and mineralogical features. The industrial processing of kaolin encompasses stages such as raw material extraction, beneficiation, and purification, aiming to optimize parameters including …
Published in International Journal of Crystalline Materials · Vol. 2, Issue 1, 2025 · pp. 52–61 Read article