Search
237 articles for “tensile analysis”
-
Structural Assessment of Rigid Pavement Systems Under Heavy Loading Conditions
Abstract: This study presents an analysis of pavement and foundation layer design subjected to heavy vertical loads and upward soil pressure. A total load of 1716 tonnes transmitted from the superstructure is considered acting on the pavement system. Due to upward soil pressure, tensile stresses develop in the foundation layers, requiring adequate thickness of sand and aggregate layers to ensure structural stability. Based on the tensile strength of sand (2 N/mm²), …
Published in Trends in Transport Engineering and Applications · Vol. 13, Issue 1, 2026 · pp. 36–48 Read article
-
Electrically Conductive Micro-Aluminum Reinforced Polymer Composites for IoT-Enabled Lightweight Antenna Housings
Abstract: Electrically conductive polymer composites have emerged as promising multifunctional materials for lightweight antenna housings by integrating structural strength, electrical conductivity, thermal stability, and electromagnetic interference shielding. In this study, micro-aluminum reinforced Acrylonitrile Butadiene Styrene (ABS) polymer composites were fabricated using twin-screw melt compounding followed by compression molding for IoT-enabled lightweight antenna housing applications. The influence of micro-aluminum loading on microstructure, mechanical performance, electrical conductivity, EMI shielding, thermal stability, and wireless …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article
-
Fatigue Study of Friction Stir Welded and TIG Welded AA 6061 Alloy Similar Joints
Abstract: In this study, Al-Mg-Si alloy plates in 4 mm thickness that are particularly used for aerospace and automotive industries were welded using Tungsten Inert Gas (TIG) welding and Friction Stir Welding (FSW) methods as similar joints with one side pass with parameters of varying tool rotation, weld speed and 2.3 degree tool tilt angle. Tensile tests results showed high yield stress values for FSW joints. Micro Vickers hardness test gave …
Published in Trends in Mechanical Engineering & Technology · Vol. 10, Issue 1, 2020 · pp. 12–21 Read article
-
Comprehensive Experimental Analysis of the Mechanical Properties and Enhancements of Natural Fiber Composites
Abstract: This research investigates the mechanical characteristics of bio-composites reinforced using jute and sisal fibers. Natural fibers have emerged as promising alternatives because of their low density, renewability, biodegradability and approving mechanical properties. The research involved fabricating bio-composite plates using the hand lay-up method with varying orientations of jute and sisal fibers. The mechanical parameters, including tensile strength, impact strength, and flexural strength, were rigorously assessed and compared across various fiber …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 45–53 Read article
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Investigation on The Effect of Carbon Fiber Reinforcement on The Mechanical and Physical Properties of FDM 3d Printed PLA
Abstract: In this work, the effects of annealing on the physical properties and mechanical behavior of short-carbon-fiber-reinforced polylactic acid (CF/PLA) composites made using fused deposition modeling (FDM) are systematically investigated. Pristine PLA and CF/PLA composites with 10% fibers have been made and evaluated in accordance with ASTM standards. Tensile, bending, and hardness tests were used to evaluate the performance of as-received and annealed composites. The tensile and hardness properties of PLA …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 284–298 Read article
-
Marine Algal Fiber-Reinforced Bio-Composites with Embedded Humidity Sensors for Coastal Smart Infrastructure
Abstract: The development of sustainable structural materials with integrated sensing capabilities has emerged as an effective strategy for improving the durability and resilience of coastal infrastructure exposed to aggressive marine environments. In this study, a multifunctional marine algal fiber reinforced bio-composite incorporating an embedded flexible humidity sensor was developed for real-time structural health monitoring applications. Marine macroalgae (Ulva lactuca) fibers were chemically functionalized using 3-aminopropyltriethoxysilane (APTES) to enhance fiber–matrix interfacial adhesion …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 · pp. 90–100 Read article
-
Study on the Mechanical Properties of Additively Manufactured Metallic Structures
Abstract: A revolutionary technology that has made it possible to produce intricate metallic structures with customized mechanical properties is additive manufacturing, or AM. An extensive analysis of the mechanical properties of metallic components made using additive manufacturing processesis presented in this paper. The study explores how material choice, post-processing techniques, and process parameters affect the mechanical behavior of AM metallic structures. By examining tensile strength, fatigue characteristics, hardness, ductility, impact resistance, …
Published in Journal of Experimental & Applied Mechanics · Vol. 14, Issue 3, 2023 · pp. 1–6 Read article
-
Stress and Failure Analysis of Hybrid FRP Laminated Tubular Joints
Abstract: Composite tubes have been used in transporting corrosive fluid in petro chemical and paper industries. [Fiber reinforced Polymers] FRP Composite Pipes are even becoming popular in the offshore oil and gas industry. Bonded joints with tubular adherends are finding applications in various piping industry. In the recent times Hybrid Tubular Bonded Lap Joints (HTLJ) have been extensively used to optimize the cost and to enhance the performance of the joint. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 461–471 Read article
-
Optimization Of Mechanical Properties Of 500/7 Grade Ductile Cast Iron (DCI) By Using SMAW: Applications In Reinforced Composites And Thermoplastics Through Taguchi & GRA
Abstract: Welding, a critical manufacturing process, is broadly engaged to join metals and thermoplastics using heat, pressure, or both. This study inspects the Shielded Metal Arc Welding (SMAW) method to optimize welding parameters and improve the mechanical properties of Ductile Cast Iron (DCI) grade 500/7, a material widely used in high-strength and thermal conductivity applications in aerospace and automotive sectors. Using an L9 OA (orthogonal array), experiments were conducted on nine …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 204–222 Read article
-
Synergistic Effect of Green Nanofillers on Basalt–Kenaf Reinforced Sustainable Polymer Composites
Abstract: This study examines the synergistic impact of green nanofillers on the mechanical and structural properties of basalt–kenaf fiber reinforced polyester composites, with the objective of developing sustainable, high-performance polymer materials. The composites were produced with different fiber ratios: B1 (70% basalt, 30% kenaf), B2 (60% basalt, 40% kenaf), and B3 (50% basalt, 50% kenaf), and were reinforced with 1 wt.% green-synthesized nano-TiO2, obtained using an eco-friendly sol–gel technique with plant …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1248–1262 Read article
-
Machine Learning Assisted Design and Analysis of Polymer Composite Materials for Sustainable Renewable Energy Systems
Abstract: Accurate prediction and optimization of polymer composite properties is of paramount importance in the design of these lightweight, durable, and sustainable materials within renewable energy technologies. This work will provide a holistic machine learning-assisted framework that unites materials informatics with domain-specific features and state-of-the-art ML methodologies in the prediction of the mechanical properties of polymer composites, such as tensile strength. This includes embedding several ensemble models, including Random Forest and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 391–402 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Mechanical and Tribological Properties of Cr3C2-NiCr Coated Ti6Al4V Implant Alloy
Abstract: Ti6Al4V alloys are widely used in medical and aerospace applications due to their superior mechanical properties. But, Ti6Al4V alloys are poor in tribological properties such as wear. Poor wear resistance consequences in the formation of wear debris in human implants and leads to inflammation and pain. In this work, Cr3C2-NiCr coatings were applied to improve the mechanical properties such as tensile strength, hardness and tribological properties such as wear resistance. …
Published in Journal of Experimental & Applied Mechanics · Vol. 8, Issue 3, 2017 · pp. 28–42 Read article
-
A Study of Nacl Alkali Treated Muntingia calabura fibre Reinforced Composites
Abstract: Natural fibre reinforced composites are more commonly used in various applications due to their biodegradability, low cost, available in nature and less harmful to the environment than synthetic fibres. In the present study, NaCl alkali treated MuntingiaCalaburafibres(MCF) reinforced composites are developed using hand layup technique and evaluated the mechanical properties of the composites. The increase of the NaCl content (up to 20 percent) and the fibre weight is maintained constant …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 500–507 Read article
-
Enhancing Thermal and Mechanical Performance of Polymer-Based Phase Change Materials with Graphite Nanoplatelets: A High-Efficiency Approach for Energy Storage Applications
Abstract: This study explores the performance enhancement and characterization of polymer-based phase change material (PCM) composites reinforced with graphite nanoplatelets (GNPs) for thermal management applications. The integration of GNPs significantly improved thermal conductivity, which increased from 0.38 W/m·K in pure PCM to 2.60 W/m·K with 10 wt% GNPs, marking a 580% improvement. Differential Scanning Calorimetry (DSC) analysis revealed a reduction in latent heat capacity from 180 J/g to 150 J/g—approximately 16.7%—attributed …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 150–162 Read article
-
Effect of Fiber Weight Fraction on the Mechanical Performance of Calotropis Gigantea Fiber-Reinforced Polyester Composites
Abstract: Natural fiber-reinforced composites have attracted more attention as environmentally friendly substitutes to synthetic materials since the move towards a sustainable approach to engineering materials has gained in popularity. This paper focuses on the potential use of Calotropis gigantea (CG) stem fibers as laminate reinforcement with bio-composites made through an unsaturated polyester resin (GP) system. Super strength fibers were pulled out, treated with alkaline to boost interfacial adhesion, and positioned in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 339–349 Read article
-
Evaluation of Mechanical Property and Optimization of the Dry Sliding Wear Behavior of Carbon Black-Alumina-Epoxy-Glass Composite by using Design of Experiments
Abstract: The research work is mainly focused on investigating the effects of wear parameters: filler content (0%, 4% CB, 4% Al2O3,and 2% CB + 2% Al2O3), applied load (4.905, 9.810, 14.710, and 19.62 N), sliding distance (20, 30, 40, and 50 mm) by using Design of Experiments (DOEs) approach. The experimental results were analyzed using MINITAB V16 scientific graphical and data analysis software. Signal-to-Noise (S/N) ratio, analysis of variance (ANOVA) proved …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 2, 2014 · pp. 21–31 Read article
-
Review and analysis of the Programmable Tungsten Inert Gas Welding Machine
Abstract: The purpose of this study is to examine metal inert gas (MIG) and tungsten inert gas (TIG) welding processes. This study focuses on welding defects with various kinds of AISI- 1020 mild steel welding joints when using metal inert gas (MIG) and tungsten inert gas (TIG). The impact of different process variables on mild steel welding was looked into. In this study, the main process parameters were changed, and destructive …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 2, 2026 Read article
-
An Experimental Study on the Fabrication and Mechanical Properties of Natural Fiber Reinforced Polymer Hybrid Composites
Abstract: Natural fiber-reinforced polymer composites are increasingly investigated as lower-impact alternatives to conventional synthetic fiber systems. This work fabricated and mechanically characterized a sisal-coconut coir fiber-reinforced epoxy hybrid composite and compared its performance with a glass fiber-reinforced polymer (GFRP) epoxy composite under the reported laboratory conditions. The hybrid reinforcement contained 75% sisal fiber and 25% coconut coir fiber and was incorporated into an epoxy LY556/HY951 matrix by the hand lay-up technique. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 5, 2026 Read article