Search
232 articles for “Uniform”
-
Aluminium-Doped Zinc Ferrite Nanoparticles Synthesized by Combustion Method for Polymer Composite Applications
Abstract: ZnFe₂₋xAlₓO₄ (x = 0 and 0.5) nanoparticles were synthesized via a combustion method owing to its simplicity, cost efficiency, and ability to produce highly crystalline nanomaterials. Powder X-ray diffraction (XRD) analysis confirmed the formation of a single-phase cubic spinel structure without detectable secondary phases, indicating high phase purity. The average crystallite size was estimated to be in the range of 14–20 nm, confirming the nanocrystalline nature of the samples. Field-emission …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 272–282 Read article
-
Hybrid Epoxy Composites with Areca and Abaca Fibers: Effect of Nano-SiO₂ on Mechanical Properties
Abstract: This study explores the fabrication and mechanical evaluation of sustainable epoxy-based hybrid composites reinforced with Areca fiber (ARF), Abaca fiber (ABF), and nano-silica (SiO₂). The composites were made using a hand layup process, maked five variants (S1–S5) with ARF content ranging from 0–40 wt% and nano-silica content from 0–8 wt%, while maintaining ABF as the primary reinforcement. Mechanical performance was assessed through tensile strength (TS), flexural strength (FS), and impact …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 606–613 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Role of Fluid Engineering in Biomedical and Healthcare Systems: A Comprehensive Review
Abstract: Fluid engineering — the study and application of fluid behavior, transport, and interaction — has become a cornerstone of modern biomedical and healthcare systems. This review synthesizes the multifaceted roles fluid engineering plays across diagnostics, therapeutics, biomedical devices, and physiological modeling. Micro-fluidics enables precise manipulation of microliter and nanoliter volumes, facilitating rapid point-of-care diagnostics, high-throughput screening, and the fabrication of uniform nano particles for targeted drug delivery. In cardiovascular medicine, …
Published in Trends in Mechanical Engineering & Technology · Vol. 16, Issue 1, 2026 · pp. 1–5 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article
-
Engineered Hybrid Nanoclay-Infused Nano-Polymers for Multifunctional Anti-Corrosive Coatings
Abstract: Polymer nanocomposites reinforced with layered nanofillers have emerged as an effective route to enhance structural stability in protective coating applications. Polymer–clay nanocomposites also provide a promising route to enhance mechanical robustness and environmental durability in coating systems. In this study, a hybrid epoxy–polyurethane (EPU) coating was reinforced using organo-modified montmorillonite (o-MMT) and layered double hydroxide intercalated with 2-mercaptobenzothiazole (LDH–MBT). Uniform dispersion and interfacial anchoring between the nanoclays and polymer chains …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 40–53 Read article
-
A Study on Tensile Characterization of Polypropylene Reinforced with Recycled Epoxy Particles
Abstract: Polypropylene is a thermo plastic, tensile properties of polypropylene are crucial in the real world applications as they determine structural integrity and durability. Epoxy is a thermosetting plastic finds applications in various fields like aerospace, automobile, food packing etc. A major concern is the disposal of epoxy composites after their service life, since most of the waste is sent to landfills, causing land pollution and soil infertility. In this experimental …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 221–237 Read article
-
Cancer Chemotherapy-Induced Cachexia: Bridging Mechanisms, Management, and Future Therapies
Abstract: Involuntary weight loss, skeletal muscle atrophy, adipose tissue depletion, anorexia, and systemic inflammation are all symptoms of chemotherapy-induced cachexia, a complex illness. Although it is common, it remains poorly understood and is often referred to as an "orphan disease." This study covers the epidemiology, pathophysiology, clinical symptoms, diagnosis, treatment, and emerging treatment options for chemotherapy-induced cachexia. To comprehend the causes, clinical results, and therapeutic approaches, a literature-based synthesis of recent …
Published in Research and Reviews: A Journal of Pharmacology · Vol. 16, Issue 1, 2026 · pp. 17–26 Read article
-
Structure-Property-Process Relationships in BNNS-Modified PEEK Nanocomposites for High-Performance Applications
Abstract: This study reports the design and performance evaluation of boron nitride nanosheet (BNNS)-reinforced polyetheretherketone (PEEK) nanocomposites fabricated using melt compounding and high-temperature Fused Filament Fabrication (FFF). PEEK, a high-performance thermoplastic, was reinforced with BNNS at 0.5–5wt.% to enhance mechanical, thermal, and tribological functionalities for advanced engineering use. Composite filaments were extruded and printed using a modified Bambu Lab FFF printer. Mechanical testing revealed a peak tensile strength of 108 MPa …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 867–888 Read article
-
Bayesian Optimization–Driven Operating Parameter Tuning for Maximizing Methane Yield in Anaerobic Digestion
Abstract: To achieve maximum methane production in an anaerobic digestion (AD) process, a combination of various operational parameters must be tuned nonlinearly in the digestion ecosystem. The conventional trial and error optimization methods are slow, resource consuming, and in most instances, cannot model the intricate parameter interaction in biogas production. The current work introduces a Bayesian Optimization-based model to optimize the set of conditions to maximize the level of methane produced …
Published in International Journal of Energy and Thermal Applications · Vol. 4, Issue 1, 2026 · pp. 1–8 Read article
-
ML-Driven Optimization Framework for the Analysis, Design, and Development of Efficient Wireless Power Transfer Systems for EV Charging
Abstract: The fast uptake of electric vehicles (EVs) has heightened the necessity of effective, dependable and convenient charging systems. The Wireless Power Transfer (WPT) systems can be taken as a potential solution as they allow charging cells without contact, without any risks, and without any overcrowding; the efficiency of the system is strongly influenced by the alignment of coils, the fluctuations of air-gaps, the conditions of the loads, and geometrical arrangements …
Published in International Journal of Manufacturing and Production Engineering · Vol. 4, Issue 1, 2026 · pp. 1–9 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 Read article
-
Polymer Electrolyte Films Doped with Nanofillers ZnO: Electrochemical and Optical Investigations
Abstract: The electrochemical and optical characteristics of polymer composite electrolyte films doped with zinc oxide (ZnO) nanofillers are thoroughly examined in this work. Because of its superior film-forming capacity, flexibility, and ionic transport properties, poly(vinyl alcohol) (PVA) mixed with potassium iodide (KI) is used as the host polymer electrolyte. To investigate their effects on ionic conductivity, dielectric behavior, and optical transmission, ZnO nanoparticles are synthesized and added to the PVA–KI matrix …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 320–332 Read article
-
Hierarchical Computational Modeling of Physical Structure Across Quark, Nuclear, and Atomic Scales
Abstract: We present a modular, multi-scale computational framework that integrates physical modeling and visualization across quark, nuclear, and atomic scales within a unified pipeline. Developed to address the traditional fragmentation between sub-nucleonic, nuclear, and electronic representations, the system provides a continuous data flow and visualization bridge spanning from femtometers to ångströms. The framework consists of three primary modules: a particle-level module illustrating nucleons as confined quark-triplets with effective flux-tube geometries; a …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Performance and Emission Profiles Enhancement of CI Engine with Aluminium Oxide-Reinforced Polymeric Composite in Biodiesel Blends
Abstract: The integration of aluminium oxide (Al₂O₃) nanoparticles into B10 biodiesel blends offers a promising approach to improving engine performance and reducing harmful emissions. This study evaluates the effect of Al₂O₃ additives on Brake Thermal Efficiency (BTE), Brake Specific Fuel Consumption (BSFC), and exhaust emissions in a compression ignition engine. Experiments were conducted using calibrated instruments, and uncertainties were considered with a coverage factor of 1.66, yielding an overall error margin …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 775–788 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
Development and Mechanical Characterization of Hybrid Natural Fiber-Reinforced Polymer Matrix Composites for Structural Applications
Abstract: The growing demand for sustainable, lightweight, and cost-effective materials in engineering has driven significant interest in natural fiber-reinforced polymer composites (NFRPCs). Among various options, hybrid composites combining two or more natural fibers offer a balanced improvement in mechanical properties while maintaining environmental benefits. This study investigates the fabrication and mechanical performance of jute–hemp fiber-reinforced epoxy composites. Specimens were prepared using the hand lay-up technique followed by compression molding to ensure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1181–1189 Read article
-
Combustion Synthesis and Comprehensive Characterization of Pure and Ni-Doped CuFe₂O₄ Nanoparticles for Functional Composite Applications
Abstract: The CuFe2-xNixO4 (x = 0, 0.1, 0.3, and 0.5) nanoparticles were synthesized using a combustion method and comprehensively characterized to understand their suitability for polymer-based composite applications. X-ray diffraction confirmed the formation of a single-phase spinel ferrite structure with crystallite sizes of 20–30 nm. Energy-dispersive X-ray spectroscopy verified the successful incorporation of Ni ions into the CuFe₂O₄ lattice, while FE-SEM analysis revealed uniformly dispersed nanoscale particles desirable for composite reinforcement. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1–11 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article