Search
478 articles for “R Glass”
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Polymers and Composites in the Design and Construction of Unmanned Aerial Vehicles: A Comprehensive Technical Review
Abstract: The emergence of Unmanned Aerial Vehicles (UAVs) over the last few years has mostly been made possible by breakthroughs in material science. This review is concerned with an overview of some of the polymers and composites that are being commonly used in drone manufacturing in recent times, especially in relation to the influence of material choice on drone performance and capability. It sheds light on the drastic change in the …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 874–882 Read article
-
Comparative Study of Mechanical Properties of Sisal/Epoxy, Fiber/Glass Epoxy, Sisal/Fiber Glass/Epoxy Composites
Abstract: The rate at which non-renewable resources are consumed increases, the research of using eco-friendly and sustainable materials has been in the spotlight lately. The companies from different industries are trying to find replacements for traditional synthetic materials to limit their environmental impact and promote sustainable eco-friendly initiatives. One such approach is the usage of natural fiber polymer composites as it provides a biodegradable and renewable structural alternative over traditional synthetic …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 1–11 Read article
-
The Examination of Design and Weight Optimization for a Light Motor Vehicle (LMV) Drive Shaft through the Utilization of a Composite Material Composed of Aluminum and Glass Fiber (Al + GF)
Abstract: Aluminum is primarily used in Metal Composites because of its lighter weight and higher strength. Glass fibers are wound around an aluminum shaft to create the composite. ANSYS results determine the relative amounts of aluminum and E-glass fiber in each shaft. The purpose of this study is to use a torsion test to evaluate the mechanical performance of a composite shaft composed of aluminum and glass fiber. The results are …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 3, 2024 · pp. 1–17 Read article
-
GEOPOLYMER CONCRETE BY LITHIUM BASED GLASS WASTE WITH FLY ASH
Abstract: AbstractThe cement, fly ash, and slag used in this study are local materials in compliance. The global warming is the major issue when limestone and clays are crushed and heated to high temperatures. We are using waste materials, its components, or its production process that does not cause any environmental problems, or it has high performance and life cycle sustainability. The waste material used in this research is three times …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 1, 2018 · pp. 1–5 Read article
-
Opto-electrical and Structural Properties of CuxO Thin Films grown by R. F. Sputtering Method
Abstract: CuxO (0<x<1) thin films were deposited on glass substrate by r. f. sputtering method at different r. f. power in an atmosphere of O2 and Ar. The conditions for deposition of CuxO thin film were optimized by varying the r. f. power for the deposition to vary the energy band gap of the deposited film. Structural characterizations were performed by XRD and TEM studies. The films deposited on glass substrate …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 2, Issue 1, 2011 · pp. 8–15 Read article
-
Numerical Investigation on Structural Behavior of RC Beam-Column Joints: Beam Weak in Shear
Abstract: This study presents a numerical investigation on structural performance of reinforced concrete (RC) beam-column joints (BCJ) with beam weak in shear subjected to cyclic loading. Retrofitting techniques are explored, utilizing Glass Fiber Reinforced Polymer (GFRP) for shear strengthening, in accordance with ductile detailing standards outlined in IS 13920:2016. The column and beam elements are designed following the guidelines of IS 456:2000. Various specimen scales, including full-scale, 2/3-scale, and 1/3-scale specimens, …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 202–226 Read article
-
Comparative Environmental and Economic Assessment of Wind Turbine Blade Materials
Abstract: Wind energy has proven to be one of the most stable and non-polluting renewable energy sources to mass power production. For energy production wind turbine is an essential part of the wind power plant. The choice of the blade material and coating applied on it has a strong impact on aerodynamic performance, mechanical strength, fatigue life, manufacturing possibility, and environmental effects throughout the operating life of the turbine. Hence, authors …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 91–99 Read article
-
Heat Transfer Enhancement in Solar Parabolic Trough Collectors Design Using C-shape, V-shape, and Reverse L-shape Roughness
Abstract: Solar energy can be collected and used in a large variety of ways including: passive daylighting,heating liquids and gasses, or generating electricity. Additionally, many energy sources such as wind,biomass, hydroelectricity, and even fossil fuels originate from the energy provided by the sun.Parabolic solar concentration systems are state-of-the-art or mature technology. Parabolic-troughsolar concentrating systems are parabolic-shaped collectors made of reflecting materials. Thecollectors reflect incident solar radiation onto its focal line toward …
Published in Journal of Refrigeration, Air conditioning, Heating and ventilation · Vol. 8, Issue 1, 2021 · pp. 26–41 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Developments of Fiber-reinforced Plastics
Abstract: This article is a description of fiber-reinforced plastic to subject composite, where individual constitutions have been reinforced to develop better properties than individual materials. Fiber-reinforced composite materials are alternatives over solitary metals or alloys in terms of strength, stiffness, density, and low cost with improved sustenance. Differential behavior from composited formation has functionally upgraded after usage from the equivalent differential proportion of filler added. Or add-in addendum has been implicated …
Published in Emerging Trends in Chemical Engineering · Vol. 8, Issue 2, 2021 · pp. 1–9 Read article
-
Design and Analysis of S-Glass Heat Exchanger
Abstract: This research work focuses on the composite material named S-Glass fibre Heat Exchanger, since the existing designs of heat exchangers are generally made up of metals which produce a critical amount of heat loss to the surrounding from the shell. These are also less corrosive resistant, have low life and high weight. To overcome these drawbacks, use of composite materials has become essential. There is a need to redesign it …
Published in Journal of Thermal Engineering and Applications · Vol. 8, Issue 4, 2021 · pp. 62–68 Read article
-
Drilling Effect on Fiber Composites: A Review
Abstract: Composites laminates show immense mechanical properties like strength-to-weight ratio, damage tolerance, fatigue and corrosion resistance therefore conventional materials are replaced by composites in many areas such as automobile and aircraft structure. Machining of composites is very difficult than machining of a conventional material because composites are inhomogeneous and extremely abrasive. In production drilling is important machining process used to produce hole for riveted and bolted joint. There are many improvements …
Published in Journal of Experimental & Applied Mechanics · Vol. 6, Issue 3, 2015 · pp. 42–50 Read article
-
Review on Harmful Pollutants Causing Water Pollution in the Yamuna River
Abstract: The Yamuna River is one of the major sources of water supply in India. Because of its immense importance, the pollution of Yamuna River has become an important issue of study. Currently, Yamuna is major polluted rivers in our country. It starts from Yamunotri glaciers with 6486 meters. The main reason in escalating the river pollution is due to barrages formed on the river. The Yamuna got polluted as it …
Published in Research & Reviews : Journal of Ecology · Vol. 11, Issue 2, 2022 · pp. 10–15 Read article
-
Tensile Capacity of Corroded Steel Section Strengthened Using Fiber Composite Wrap
Abstract: Strengthening and rehabilitation of structures is a major concern for researchers in the civil engineering community in recent years due to the aging of structures and the need for effective methods of strengthening. Many researches are being carried out on strengthening of reinforced concrete structures using fiber composite materials. A very few researches are being reported on strengthening of corroded steel members using fiber composite materials. Since corrosion is an …
Published in Journal of Construction Engineering, Technology & Management · Vol. 2, Issue 1-3, 2012 · pp. 54–65 Read article
-
AI-Driven Prediction of Square-Hole Laser Trepanning Performance in AA7075/15%SiC/15% Glass Fiber Hybrid Composites Using Taguchi–ANOVA and Deep Neural Networks
Abstract: Hybrid AA7075 composites reinforced with 15% silicon carbide (SiC) and 15% glass fiber were fabricated via the stir casting technique to improve machining and structural performance. The addition of dual reinforcements into the aluminum matrix was aimed at enhancing hardness, thermal stability, and surface quality during non-traditional drilling operations. Square-hole drilling was performed using a laser trepanning process, and the key responses—hole size accuracy, surface roughness, and taper angle—were systematically …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1932–1943 Read article
-
Alcid Bamboo
Abstract: AbstractNatural bamboo is one of the fastest growing plants, with maturity cycle of 3–4 year, thus making highly attractive natural renewable resource compared to hardwood. This bamboo can replace timber in many applications, but their mechanical property differs with species, age, climatic factor, moisture content and different height of culm. Due to this the natural bamboo can be replaced by synthetic one which are man-made and also known as engineered …
Published in Journal of Polymer & Composites · Vol. 2, Issue 3, 2023 · pp. 28–32 Read article
-
Aesthetic Values of the Surface-Driven Capillary Flow in SU-8 based Glass Microfluidic Devices
Abstract: In this research paper, author has fabricated total 422 individual SU-8 based glass microfluidic devices by the maskless lithography, clamping, and diamond-like carbon (DLC) coating using his own hands-on completely. Also, total 422 individual Audio-Video- Interleave-Files as ‘FileName.avi’ related to these microfluidic devices have been recorded and analysed by the author completely. The influence of effective viscosity on the surface- driven capillary flow of aqueous microparticle suspensions has been experimentally …
Published in Journal of Nuclear Engineering & Technology · Vol. 6, Issue 3, 2016 Read article
-
Thermal and Electrical Performance of Aluminum-Reinforced GFRP Composites
Abstract: This work examines an economical approach to improve the thermal load protection of Glass Fiber Reinforced Polymer (GFRP) composites, commonly utilized in aircraft constructions, pressure containers, and electrical insulators. Notwithstanding their superior mechanical capabilities, GFRP composites are susceptible to elevated temperatures and electrical currents, frequently resulting in considerable structural deterioration. The study introduces an innovative method employing aluminum reinforcement to enhance the thermal conductivity and protection of GFRP composite laminates. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1062–1075 Read article
-
Physio-Mechanical Experimental Characterization of Natural Fiber Polymer Composites for a Boat Hull
Abstract: Composite materials which will provide for improved mechanical properties – a focus there to develop light weight, more rugged, stronger ship hull materials. The various application of glass fibers reinforced composites can be seen in the marine applications, such as boat hull, but in case of failing badly, they are non-recyclable and poses the threat to health hazards for aquatic animals and human beings which is their significant disadvantage. MARPOL …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 · pp. 58–67 Read article