Search
184 articles for “model based controller design”
-
Investigation to Enhance Performance of Finned U-Tube Shell-and-Tube Heat Exchangers Using Epoxy Based Polymer Composite Material
Abstract: Shell-and-tube heat exchangers remain indispensable in thermal engineering systems; however, conventional metallic configurations often face challenges related to corrosion, weight, and limited thermal optimization. In this study, a novel approach is proposed by integrating epoxy-based polymer composite materials with finned U-tube geometries to enhance thermo-hydraulic performance while addressing material limitations of traditional systems. The work focuses on the development and evaluation of a hybrid heat exchanger comprising a mild steel …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 618–633 Read article
-
Swarm-Enabled AI for Smart Mobility and Sustainable Transport
Abstract: The significant issues facing the modern urban infrastructure are the management of road traffic problems, such as severe traffic congestion, the detection of unsafe driving behavior, and road safety. The traditional ground-based surveillance systems will be helpful, but they will reach their limits in large and dynamic environments. It is because of predetermined perspectives, blindness, and the inability to scale. To designate these problems, the present study proposes a traffic …
Published in Journal of Advancements in Robotics · Vol. 13, Issue 1, 2026 · pp. 33–38 Read article
-
Enhancing Energy Efficiency in HVAC Systems: A Comprehensive Study of EC+ Fans, VFDs, and AI Integration
Abstract: This research paper explores the integration of EC+ fans with Variable Frequency Drives (VFDs) and Permanent Magnet (PM) motors to enhance energy efficiency and operational performance in heating, ventilation, and air conditioning (HVAC) systems. An extensive energy audit was conducted at the BidP plant in Bangalore, focusing on air handling units (AHUs) in Hangar 101. The audit revealed substantial variations in fan efficiency, secondary fan performance, power consumption, and airflow …
Published in Trends in Machine design · Vol. 11, Issue 3, 2024 · pp. 44–54 Read article
-
Heat Stress Mitigation in Resource-Constrained Dairy Farming Systems: Practical Strategies for Sustainable Development
Abstract: Heat stress poses a critical threat to dairy production, particularly in resource-constrained systems prevalent across tropical and subtropical regions. Elevated ambient temperatures, compounded by high humidity, directly impair feed intake, milk yield, reproductive efficiency, and overall animal welfare. In low-resource settings, conventional cooling technologies such as automated fans, sprinklers, and climate-controlled housing remain economically inaccessible. Therefore, cost-effective, locally adaptable, and sustainable solutions are essential for maintaining productivity and animal health. …
Published in International Journal of Climate Conditions · Vol. 2, Issue 2, 2025 · pp. 1–12 Read article
-
AI-Accelerated Development of Gradient Polymer Nanocomposite Thin Films
Abstract: Gradient polymer nanocomposite thin films are an active field of materials research due to the fact that it enables scientists to de-facto regulate the optical, electrical, and mechanical properties of a film by merely altering its composition on a layer-by-layer basis. This type of control opens the gate to the improved flexible electronics, long lasting protective coats, and the new smart gadgets. The problem is, though, that it is a …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 456–469 Read article
-
A Comprehensive Study of various Multi-Area Hybrid Power Systems for Generation Control
Abstract: This paper is a detailed examination of multi-area hybrid power systems in the control of the generation taking into consideration the two area up to five area connected networks. As renewable energy sources are more and more integrated, and modern grids become more and more complex, the stability of the system itself and the frequency regulation have risen to a major issue. The study highlights the significance of Automatic Generation …
Published in International Journal of Electrical Power and Machine Systems · Vol. 3, Issue 2, 2025 · pp. 28–42 Read article
-
HFSS-Based Helix Antenna Design Optimization and Simulation
Abstract: This project uses HFSS (High-Frequency Structure Simulator) to simulate, develop, and analyze the performance of a helix antenna for (a particular purpose, such as broadband wireless or satellite communication). Because of their distinctive structural characteristics, helix antennas are well-suited for a variety of high-frequency applications by balancing compactness, high gain, and wide bandwidth. In this work, we parametrically analyze important design parameters including pitch, radius, number of turns, and wire …
Published in Recent Trends in Sensor Research & Technology · Vol. 12, Issue 1, 2025 · pp. 29–35 Read article
-
Smart Firefighting Robot using Arduino Uno
Abstract: A fire is dangerous and can have many repercussions. Numerous accidents can be avoided by promptly identifying and putting out a fire. Human resources have been our mainstay thus far. The person's life is often in jeopardy as a result. Consequently, fire safety becomes essential to save lives. The fire extinguishing robot proposed and designed in this work locates the fire and utilizes sprinklers to extinguish it when the pump …
Published in International Journal of Electronics Automation · Vol. 3, Issue 1, 2025 · pp. 21–27 Read article
-
Machine Learning-Driven Force Analysis for Tool Wear Prediction Systems
Abstract: A system designed to forecast tool wear by utilizing a force sensor to monitor the wear of the tool's flank and applying a Convolutional Neural Network (CNN) for forecasting purposes. The methodology is demonstrated through experiments in milling, utilizing dry machining with a ball endmill on a stainless-steel component. The flank wear of the tool is directly assessed using a digital microscope throughout the operation. The forecasts produced by the …
Published in Journal of Mechatronics and Automation · Vol. 11, Issue 3, 2024 · pp. 16–25 Read article
-
Genetic Algorithm Based Simulation for IEEE-30 Bus System Multi-Objective Power Flow Design
Abstract: In order to control and orchestrate profitable power structures, OPF algorithms are a critical area of research. Perfect Power Flow is utilised to keep objective work to a minimum. This goal restriction might be a single goal or a set of goals. In this work, we used a perfect energy stream to reduce the cost of fuel while meeting constraints such as generator tension and electrical yields, which are used …
Published in Journal of Electronic Design Technology · Vol. 12, Issue 3, 2021 · pp. 9–15 Read article
-
Finite Element, Experimental, and Machine Learning-Based Optimization of Machining Stability for Polymer Composite Material Processing
Abstract: The machining of polymer composite materials, particularly fibre-reinforced polymer-matrix composites, requires stable spindle-tool performance to avoid delamination, fibre pull-out, matrix cracking, thermal softening, poor surface integrity, and premature tool wear. In line with the scope of the Journal of Polymer & Composites, this study presents an integrated finite element, experimental, and machine learning framework for improving machining stability during end-milling of composite material systems. The spindle-tool assembly is modelled using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Investigations On Use of Poly(3,4-Ethylenedioxythiophene): Poly (Styrene Sulfonic Acid) (PEDOT: PSS) Conductive Polymers for Design of Improved EEG Based Brain Computer Interface for Seizure Control and Analysis
Abstract: This research explores the application of Poly(3,4-ethylenedioxythiophene):poly(styrene sulfonic acid) (PEDOT:PSS) conductive polymers in the design of an enhanced Electroencephalography (EEG)-based Brain-Computer Interface (BCI) for seizure control and analysis. PEDOT: PSS, known for its high conductivity, flexibility, and biocompatibility, is employed to improve the efficiency and sensitivity of EEG electrodes, addressing challenges such as signal noise, skin-electrode impedance, and user comfort. The study evaluates the material’s properties, including its electrical conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 223–241 Read article
-
Support of Knowledge-oriented Business Processes through Workflow Management Systems
Abstract: A major challenge in implementing business process-related knowledge management is to encourage employees to participate in knowledge processes. On the one hand, the educational work should be integrated harmoniously into the work context and, on the other hand, information must be presented and actively distributed as needed. In order to be able to introduce systematic knowledge management in companies, the design dimensions that a knowledge management project encompasses must first …
Published in E-Commerce for Future & Trends Read article
-
Polymer-Based Ankle-Foot Orthoses: Innovations in Material Selection and Functional Enhancement
Abstract: Ankle-foot orthoses (AFOs) are critical devices in rehabilitative therapy for patients with foot drop due to neurological disorders such as stroke, multiple sclerosis, and cerebral palsy. These conditions impair dorsiflexion, making walking difficult and increasing the risk of falls. Traditional AFOs, often made from rigid thermoplastics, provide support but limit flexibility and patient comfort. Recent advancements in polymer chemistry have introduced innovative materials that enhance the functionality, durability, and effectiveness …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 49–55 Read article
-
Corrugated Tube Shell-and-Tube Heat Exchanger Using Epoxy-Based Polymer Composite Coatings for Lightweight and Efficient Thermal Systems
Abstract: Corrugated tube geometries are widely recognized for their ability to enhance heat transfer through boundary layer disruption and secondary flow generation. In this study, a combined experimental and computational investigation is carried out to evaluate the thermo-hydraulic performance of a shell-and-tube heat exchanger incorporating corrugated stainless steel tubes integrated with an epoxy-based polymer composite coating and housed within a mild steel shell. Unlike conventional metallic systems, the present work introduces …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 603–617 Read article
-
Design and Implementation of an Automatic Rain Sensing Wiper System Using SEN0545 Sensor and Raspberry Pi Pico W
Abstract: This study presents the design and development of an intelligent, automatic rain-sensing wiper system designed to enhance vehicle safety. The system utilizes a SEN0545 capacitive rain sensor, integrated with internal signal processing, and a Raspberry Pi Pico W microcontroller as its central control unit. The proposed approach enables non-contact and corrosion-free rain detection, ensuring reliable performance under varying environmental conditions. Based on the detected rainfall intensity, the controller dynamically adjusts …
Published in Trends in Electrical Engineering · Vol. 16, Issue 2, 2025 · pp. 16–25 Read article
-
Internet of Things in Smart Grid: Applications, challenges, Conditions, Architecture- A Review
Abstract: Future-generation intelligent optimisation in electrical system design is essential for managing electrical networks and distribution systems. It also requires interoperability variations in the implementation of physical or graphical models. The Internet of Things (IoT) plays a significant role in smart grids and distributed electricity systems. IoT enables the monitoring of the smart grid's electrical energy and facilitates the integration of real-time data into electrical grid architecture at various levels. Industrial …
Published in International Journal of Electrical Machine Analysis and Design · Vol. 2, Issue 2, 2024 · pp. 1–9 Read article
-
Firefly Algorithm–Based Optimization of Processing Parameters for Enhanced Performance of Polymer Composite Materials
Abstract: Polymer composite materials are extensively used in aerospace, automotive, and oil & gas applications due to their high strength-to-weight ratio and design flexibility. However, achieving optimal mechanical and thermal performance strongly depends on precise control of processing parameters such as curing temperature, energy consumption, and material utilization. Conventional trial-and-error approaches often lead to excessive energy usage, non-uniform curing, and sub-optimal composite properties. To address these challenges, this paper proposes an …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 90–107 Read article
-
Entropy, Symmetry, and Data Fusion: Emerging Methods in Multi-Objective Decision- Making and Smart Systems
Abstract: In the era of intelligent technologies and data-driven systems, multi-objective decision-making (MODM) has become an essential aspect of managing complex environments such as smart cities, autonomous systems, and cyber-physical networks. As decision-making scenarios become increasingly dynamic and uncertain, there is a growing need for advanced methodologies that can handle diverse objectives, conflicting constraints, and incomplete information. This review highlights the emerging role of entropy, symmetry, and data fusion as foundational …
Published in Emerging Trends in Symmetry · Vol. 1, Issue 2, 2025 · pp. 44–49 Read article
-
Review of Subsea Pipeline for Minimizing Thermal and Pressure Expansion
Abstract: As the offshore oil and gas fields have been exploited in deeper water, subsea pipelines are required to operate at high temperatures and pressures. It causes subsea pipelines to be more subject to movements both in lateral and axial directions due to the loads produced by high temperatures and pressures. Some high temperature pipelines have experienced the cumulative axial displacement of an overall pipeline length over a number of start-up/shut-in …
Published in Journal of Petroleum Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 10–22 Read article