Search
185 articles for “Material degradation”
-
Evaluating the Effect of Carbon Fillers on the Mechanical Properties of Jute and Epoxy Composite Wind Turbine Blades
Abstract: Natural fibers are a sustainable substitute for synthetic materials because of many benefits, which include light weight, biodegradability, renewability, and affordability. An approach to sustainable blade design that shows promise is its use into wind turbine blades. The study focuses on jute/epoxy composite's tensile strength, impact strength, water absorption, void fraction and degradation with carbon fillers and apply in making small wind turbine blades. To fabricate the composites, two jute …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 191–203 Read article
-
Effect of Ply Orientation on Thermal Erosion and Conductivity of Silica Phenolic Composites Under Oxy-Acetylene Flame
Abstract: The thermal and erosion performance of fiber-reinforced composites is highly sensitive to fiber architecture, matrix chemistry, and processing techniques, factors that have shaped development of advanced thermal protection systems (TPS) over past two decades. Silica phenolic (SP) composites, in particular, are widely employed in aerospace and defense applications due to their flame resistance, char stability, and ability to withstand severe thermal shock. However, optimizing thermal conductivity while improving erosion resistance …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 273–283 Read article
-
Advanced Solid-State Battery Technologies for Sustainable Energy Storage
Abstract: The increasing global demand for sustainable and high-performance energy storage systems has accelerated research in advanced battery technologies. Conventional lithium-ion batteries, while widely used in portable electronics, electric vehicles, and grid storage systems, face limitations such as safety risks, limited energy density, slow charging rates, and degradation over repeated cycles. To overcome these challenges, advanced solid-state battery technologies have emerged as a promising solution for next-generation energy storage applications. This …
Published in International Journal of Solid State Innovations & Research · Vol. 4, Issue 1, 2026 Read article
-
Stretchable Elastomer–Phase Change Composites for Passive Thermal Management in Wearable Electronics
Abstract: Elastomer-embedded phase change material (EPCM) composites are developed as stretchable, leakage-free, and electrically insulating thermal regulation layers for wearable electronics operating under stringent skin-safety requirements. The EPCM architecture comprises microencapsulated organic phase change materials (μPCM, 30–70 wt%) uniformly dispersed within soft elastomer matrices based on PDMS or SEBS-type thermoplastic elastomers, together with low loadings (1–8 wt%) of electrically insulating hexagonal boron nitride (h-BN) fillers to enhance lateral heat transport. Differential …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 30–41 Read article
-
Advanced Fiber-Reinforced Polymer Composites: Processing, Nano-Modified Adhesive Technologies, Interfacial Engineering, Durability, and Structural Applications—A Comprehensive Review
Abstract: Fiber reinforced polymer (FRP) composites are considered to be one of the most universal categories of advanced engineering materials owing to their unique properties such as outstanding strength-to-weight ratio, corrosion resistance, fatigue durability, and wide opportunities for design. Innovations in the fields of fiber reinforcement, polymer matrix system, composite manufacturing technologies, and nano-modified adhesives technology have greatly extended the range of applications of this type of materials in aerospace, automotive, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 980–990 Read article
-
Corrosion Measurement and Hardness Test of Magnesium-Tri Calcium Phosphate Composite Fabricated by Stir Casting
Abstract: Magnesium MMC is preferred in applications requiring high-quality materials and has replaced monolithic materials. Bio-implants traditionally used are titanium, steel, and nickel-titanium alloys, however, their removal necessitates surgery, which is costly and painful. While biodegradable 3D-printed implants are effective and eliminate the need for a second surgery, they remain expensive. After several studies to solve this issue, the development of biodegradable implants is considered. Magnesium possesses good biodegradable properties. An …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 436–447 Read article
-
Prediction of Depth-Induced Stress Distribution and Maintenance Cost Implications for Submerged Structural Components
Abstract: This study investigates the influence of water depth on stress distribution and structural integrity of submerged mechanical components . Structural models fabricated from mild steel, stainless steel, carbon steel, and copper alloy were examined under hydrostatic loading corresponding to water depths between 30 cm and 150 cm. Results indicate that normal and shear stresses increased proportionally with depth due to intensified hydrostatic pressure. Mild steel exhibited the highest stress concentrations, …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 29–35 Read article
-
Assessment of Matrix Cracking and Fiber Breakage in Hybrid Composite Materials.
Abstract: Hybrid composite materials, combining two or more distinct fiber or matrix constituents, have emerged as advanced structural solutions for aerospace, automotive, marine, and civil engineering applications. However, their complex microstructure makes them susceptible to multiple interacting damage mechanisms, particularly matrix cracking and fiber breakage. This study provides a comprehensive assessment of these damage modes, emphasizing their initiation, evolution, and combined effects on the mechanical integrity of hybrid composites. Matrix cracking …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Influence of Infill Density on Structural Performance of FDM-Processed PET-G Polymer: Experimental Validation through Quadcopter Flight Testing
Abstract: Polyethylene terephthalate glycol-modified (PET-G) is an amorphous thermoplastic copolymer increasingly adopted in structural applications through fused deposition modeling (FDM). However, the correlation between FDM processing parameters, especially infill density, and mechanical performance of PET-G parts remains inadequately characterized under real-life loading conditions. This study investigates how infill density (10% and 30%, grid pattern) influences the structural integrity of FDM-processed PET-G components, validated experimentally through quadcopter airframe fabrication and flight testing. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 644–656 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Chemical Modifications and Tensile Properties of Areca Leaf Sheath Fiber Reinforced Polymer Composites: A Comprehensive Review
Abstract: Areca leaf sheath (ALS) fiber is a promising eco-friendly material, offering a sustainable, lightweight, and cost-effective alternative for low-strength applications. Its natural biodegradability aligns well with the growing global demand for environmentally responsible materials. This review explores the transformative effects of chemical treatments, such as alkali, silane, and benzoylation, on the tensile properties of Areca leaf sheath fibers. Among these, alkali treatment consistently demonstrates the most significant improvement in tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 94–106 Read article
-
Crystalline and Polymeric Interactions in Multi- layered Bulletproof Glass: A Study of Ballistic Resistance and Structural Integrity
Abstract: Bulletproof glass is engineered to withstand high-impact projectiles, offering a critical line of defense in various industries such as banking, military, and armored vehicles. This study explores the structural composition, energy absorption mechanisms, and performance characteristics of bulletproof glass when exposed to ballistic threats. The glass consists of layered constructions, often involving polycarbonate and adhesive interfaces such as polyvinyl butyral, which enhance its energy absorption and resistance to projectiles. The …
Published in International Journal of Crystalline Materials · Vol. 1, Issue 2, 2024 · pp. 10–17 Read article
-
Synergistic Effects of Hybridized Nano-Silica and Hemp Fiber Reinforcement on Bio-Epoxy Composites
Abstract: Natural fiber-reinforced bio-epoxy composites have become promising sustainable alternatives to conventional synthetic-fiber petroleum-based materials, but are often limited by low fiber-matrix interfacial bonding, low thermal stability, and high moisture absorption which limit their application in structural applications. These issues are discussed in this work, by carrying out a systematic investigation of the synergistic effects of the hybridization of nano-silica particles with alkali-treated hemp fibers in a bio-epoxy matrix the composites …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 214–228 Read article
-
Nanotechnology-Enhanced Battery Management System for Passive Cell Balancing in Lithium-Ion Polymer Batteries for Electric Vehicles
Abstract: The automotive industry is swiftly moving towards eco-friendly innovations, with electric vehicles (EVs) taking center stage in this transformation. A crucial component of these vehicles is the battery, particularly lithium-ion polymer batteries, which exhibit superior performance compared to other battery types. However, these batteries are sensitive to both overvoltage and undervoltage conditions, posing potential safety risks. Additionally, imbalances between individual cells can degrade battery performance and reduce its service life. …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 26, Issue 3, 2024 · pp. 27–34 Read article
-
Development and Evaluation of Mechanical Properties of Bio-Degradable Grass Fiber Composite Reinforced with Shrimp Shell Powder for Sustainable Applications
Abstract: Shrimp, a significant area of the seafood industry in terms of production, is exceeded by only prawn and salmon in terms of volume; its global annual production exceeds 4.4 million tons. India is a sea of shrimp production: the country recorded a record high production of 9 lakh tonnes (900,000 metric tonnes) of cultured shrimp in 2021. Andhra Pradesh was the major contributor to cultured shrimp culture, amounting to around …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 720–731 Read article
-
Green Technology Incubator for Sustainable Manufacturing Solutions
Abstract: The transition to a sustainable, low-carbon economy requires innovative approaches to industrial processes, particularly in the manufacturing sector, which is one of the largest contributors to global environmental degradation. This project proposes the creation of a Green Technology Incubator designed to accelerate the development of sustainable manufacturing solutions by nurturing startups and entrepreneurs focused on green technologies. The incubator's focus will be on promoting circular economy practices, energy-efficient manufacturing processes, …
Published in Journal of Nuclear Engineering & Technology · Vol. 15, Issue 1, 2025 · pp. 22–27 Read article
-
A Concise Overview of Recent Developments and Uses in Nano-Silica and Nanoparticles Encased in Silica
Abstract: Nano-silica and silica-coated nanoparticles have gained significant attention lately due to their exceptional chemical and physical properties, including a high surface area-to-volume ratio, adjustable porosity, thermal and chemical stability, biocompatibility, and ease of surface modification. These characteristics make them versatile materials applicable in various scientific and industrial sectors. Their ability to control particle size, shape, and surface traits allows them to be effectively utilized in catalysis, drug delivery, biosensing, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 696–704 Read article
-
Ants in Ecosystems and Agriculture: A Comprehensive Review
Abstract: Nearly 60% of the world’s habitats are underutilized. And current agricultural practices are blamed for contributing to soil carbon depletion and biodiversity loss. Climate change, habitat fragmentation, and other challenges hinder species development, leading to projected shifts in species distribution. This calls for alternative management strategies. The organizational structure of social insects, especially ants, offers a model for improved ants account for half of all insect biomass. It plays an …
Published in International Journal of Insects · Vol. 1, Issue 2, 2024 · pp. 15–22 Read article
-
Unification and DC Conductivity of PDMS/NiNPs Nanocomposite
Abstract: The DC conductivity of nickel nanoparticles–polydimethylsiloxane (NiNPs–PDMS) composite materials has attracted considerable attention due to their promising applications in flexible electronics, sensors, and energy storage devices. The electrical performance of these composites is largely governed by the formation of conductive networks within the insulating polymer matrix. Incorporating nickel nanoparticles into PDMS introduces conductive pathways that significantly enhance DC conductivity once a critical percolation threshold is reached.Several key factors influence the …
Published in Research & Reviews : Journal of Physics · Vol. 15, Issue 1, 2026 Read article
-
Structure–Property Relationships in Poly (N isopropylacrylamide) Hydrogels: Toward Thermoresponsive Polymer Composites
Abstract: Poly(N-isopropylacrylamide) (PNIPAAm) hydrogels can shift from solid to gel and back again at body temperature. Due to their lack structural integrity, thermal stability, and mechanical strength, they are difficult to use. This study mixed PNIPAAm with biocompatible fillers like chitosan and silicon nanoparticles to create hydrogels with superior structure-property correlations. Free radical polymerization with ammonium persulfate/TEMED initiator and N,N′-methylenebisacrylamide crosslinker produced the composites. Scanning electron microscopy showed a denser, interconnected …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 884–895 Read article