Search
162 articles for “Epoxy”
-
Synthesis and Characterization of Short Fiber Reinforced Biocomposite Materials
Abstract: The fabrication and characterization of a biocomposite reinforced with banana fiber is proposed in this proposal. The substance used for the grid was epoxy. Hand-layup preparation was the last step in the biocomposite's manufacturing. Biocomposites with various fiber and grid compositions were produced. After treating banana strands with NaOH in the composites manufacturing process, a comparative analysis between biocomposites reinforced with treated and untreated filaments was conducted. The antacid treatment …
Published in Journal of Experimental & Applied Mechanics · Vol. 15, Issue 2, 2024 · pp. 42–53 Read article
-
Development And Examination of a Composite Material Reinforced with Natural Bamboo Fiber
Abstract: This work provides a novel replacement for fiber-reinforced polymers (FRP) by integrating bamboo fibers into an epoxy matrix. Numerous studies are being conducted in this area to reach the intended standard. This composite exhibits a strong resemblance to synthetic fiber-based composites. This is mainly because to the benefits, which include low cost, biodegradable qualities, easy availability, non-toxicity, non-abrasiveness, and light weight. The representation used for the BFRP was a single …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 417–425 Read article
-
Advancements In Metal-Fiber Composites for Aerospace and Defense Applications: A Comprehensive Review
Abstract: This paper provides a comprehensive review of fiber-reinforced composites, focusing specifically on the utilization of metal-fiber composites in aerospace such as metal surface preparation prior to bonding, resin selection, and detailed examination of mechanical testing and impact studies. The significance of metal surface preparation for establishing strong bonding, which is a crucial initial step in composite fabrication, is discussed. Additionally, the prevalent use of epoxy resins and their importance in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 96–108 Read article
-
Development of Eco-friendly Glass Fiber Composites Embedded with Paddy Stubble for Sustainable Applications and Its Metallurgical Characterization
Abstract: The extreme rise in environmental challenges owing to agricultural activities, among which paddy stubble burning remains a huge concern. Burning about 15 million tons of paddy stubble leads to emissions discharge of various toxic pollutants and gases notably, nitrogen oxides, methane and carbon monoxide in large scale causing global air pollution and climate change. The study focuses on obtaining and preparing a paddy stubble powder and using it with glass …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 640–648 Read article
-
Development of Robot Arm Fingers with Polymer Soft Materials
Abstract: Lightweight soft material applications have attracted attention to Basalt Fiber Reinforced Polymer (BFRP) laminates because of their impressive mechanical characteristics. The impact response and stress-strain behavior of epoxy resin laminates armored with basalt fiber and banana fiber are investigated during this project using computational and experimental approaches. The hand lay-up method was employed to create laminates with a thickness of 3 mm, dimensions of 300x300 mm², and a layout of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 432–439 Read article
-
Assessment of Sustainable Composite for UAV structural Application
Abstract: Now-a-days aligned with global mission the growth of Unmanned aerial vehicle (UAV) application is enormous in the field of agriculture, defence, surveying etc., This research work investigates the improvement in strength of polymer matrix composite material of adding epoxy polymer resin with novel bio fibers such as Tamarindus and Morinda. The composite material was fabricated by using hand-layup method later its mechanical properties are analysed by numerical method as well …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 359–377 Read article
-
Optimization of Type-4 Plastic Liner Composite Overwrapped Pressure Vessel Design
Abstract: Composite Overwrapped Pressure Vessels (COPVs) are prominently utilized for the storage of gases at high-pressure. Their widespread adoption is because they are significantly lighter weight compared to complete metal counterparts, but requires specialized design, and manufacturing process. This research employs finite element modelling to analyse the stress and failure assessments on a specific Type-IV COPV with plastic liner as core cylinder. This study aims to optimize COPV design by considering …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 405–412 Read article
-
Mechanical Property Assessment of Hybrid Composite Laminates Composed of Jute Glass Fibers in Combination with Flax, Hemp, Sisal and Kenaf Fibers Using the Hand Layup Technique
Abstract: The present work compares the properties of various hybrid composite laminates manufactured using the hand layup technique and addresses their production process, based on glass fiber as the exterior layer and natural fibers (flax, hemp, kenaf, jute, and sisal) as interior layers, in an epoxy resin. Five stacking sequences A-GJJJJG, B-GFJJFG, C-GHJJHG, D-GKJJKG, and E-GJSSJG were used to prepare the test specimens. According to ASTM guidelines, experiments were performed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 103–113 Read article
-
Performance Evaluation of Hybrid Polymer Composite Materials for Electromagnetic Interference Shielding in Flexible and Wearable Electronic Devices
Abstract: Wearable electronic devices require novel hybrid polymer composites that offer flexible, lightweight and highly effective EMI shielding characteristics. The development and characterization of flexible polymer composites combining hard magnetic nanoparticles and electrically conductive fillers are explored. The suitability of thermoplastic polyurethane (TPU), polydimethylsiloxane (PDMS) and epoxy resins for use as EMI shielding composite matrices was evaluated in terms of their flexibility, stability and biocompatibility. Hybrid filler systems were developed to …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 630–648 Read article
-
Modified Oil Bitumen with Polymer Waste for Oil Pipeline Application from Bitu
Abstract: Protection of oil refining, oil production and gas pipeline equipment from corrosion is the most important problem today. Currently, anticorrosive materials are mainly used, resistant polymer compositions, epoxy resin, bitumen and other materials for coating metal parts of these equipment. But these anticorrosive materials do not always provide metals from corrosion at the metal-antioxidant boundary and do not provide high strength of the protective layer, so these anticorrosive materials do …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 101–109 Read article
-
Dynamic Mechanical Analysis of Carbon Fiber Reinforced Polymer Composites
Abstract: This study investigates the thermal decomposition and mechanical properties of Fiber-Reinforced Polymer Composites (FRPCs) using Dynamic Mechanical Analysis (DMA). The research focuses on improving the recycling and recovery process of Carbon Fiber-Reinforced Polymers (CFRPs), addressing environmental concerns regarding their disposal. By analyzing the effects of different heating rates (5°C and 10°C per minute) and atmospheric conditions (nitrogen, oxygen, and a combination of both), the study identifies optimal parameters for maximizing …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 386–393 Read article
-
Carbon-Al Synergy: Investigation of Fiber Stacking and Orientation on the Mechanical Properties of Al-CFRP Metal Matrix Composites
Abstract: The current study examines the mechanical behaviour of Aluminum-Carbon Fiber Reinforced Polymer (Al-CFRP) composites fabricated using compression moulding technique, a novel approach combining lightweight aluminium’s ductility with CFRP’s high strength-to-weight ratio. The polymer composites were fabricated by stacking aluminum alloy sheet of 0.5mm thickness and pre-impregnated by 12 layers of carbon fiber cloth of 200 gsm, with epoxy resin between layers, followed by consolidation under controlled temperature and pressure in …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 340–354 Read article
-
Mechanical Characteristic Analysis of Five-Layer Carbon-Carbon Composite Material
Abstract: The current study investigates the fabrication and mechanical strength of five-layer carbon-carbon composite. The strong five-layer carbon-carbon composite material with high strength and modulus is made of a raw material called precursors. The polyacrylonitrile (PAN) method is used in the fabrication of carbon fiber. The characteristics of the resulting carbon material depend on the composition and structure of the precursor. A sheet of 50 x 40 cm five-layer carbon-carbon composite …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 405–417 Read article
-
Multi-Objective Optimization of Carbon-Glass Fiber Polymer Drilling Process Based on Fuzzy Grey Entropy Weighing Method
Abstract: In recent years, the machining characteristics of hybrid fiber polymer composites have garnered significant research attention due to their growing industrial applications. This study specifically focuses on the drilling of hybrid carbon-glass fiber reinforced (CGFR) epoxy composites, fabricated using the hand layup technique. The key machining characteristics evaluated in this drilling process include surface roughness and circularity error. The influence of critical drilling process parameters, such as spindle speed, drill …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 100–112 Read article
-
Development and Evaluation of Mechanical Properties of Bio-Degradable Grass Fiber Composite Reinforced with Shrimp Shell Powder for Sustainable Applications
Abstract: Shrimp, a significant area of the seafood industry in terms of production, is exceeded by only prawn and salmon in terms of volume; its global annual production exceeds 4.4 million tons. India is a sea of shrimp production: the country recorded a record high production of 9 lakh tonnes (900,000 metric tonnes) of cultured shrimp in 2021. Andhra Pradesh was the major contributor to cultured shrimp culture, amounting to around …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 720–731 Read article
-
Analyzing Barriers to Digital Procurement in Polymer Composites Supply Chain Using ISM for Sustainable Transformation
Abstract: The adoption of e-procurement in the polymer and composites industry presents a transformative opportunity to enhance supply chain efficiency, reduce material waste, and support sustainable engineering practices. However, industries face significant barriers in transitioning from traditional procurement to digital systems, particularly in sourcing specialized materials such as epoxy resins, bio-based polymers, and hybrid composites. This study employs Interpretive Structural Modeling (ISM) to identify, analyze, and prioritize eleven critical barriers affecting …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 512–521 Read article
-
Fracture Analysis of FRP Composites under Thermo-Mechanical Loads for Different Geometry Cutouts
Abstract: Fiber-reinforced composites (FRPs) are used extensively in structural and non-structural components of the aerospace and automotive industries. To utilize these materials for structural applications, it is necessary to understand the fracture behavior of the material. In the present investigation of carbon fiber laminates, studies were carried out to understand the fracture toughness characteristics of the carbon fiber laminates with mechanical, thermal, and thermo-mechanical loadings of modes I, II, and III. …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–10 Read article
-
Experimental and Numerical Assessment of Flexural Shear Behavior of RC Beams Enhanced using Hybrid CFRP–GFRP U-Wrap System
Abstract: This study examines the Reinforced Concrete beams strengthened in Flexural-shear using a hybrid Fibre Reinforced Polymer (FRP) system that combines carbon fibre reinforced polymer (CFRP) and glass fibre reinforced polymer (GFRP) in a U-wrap configuration. Six beams totally were made and the results were tested under 4 point bending moment using LVDT, in which three beams were of control beams without strengthening and another three externally wrapped using hybrid CFRP-GFRP …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 328–338 Read article
-
Polymer-Based Acousto-Optic Ultrasonic Sensor for Non-Destructive Evaluation of Dielectric Insulation
Abstract: A dual-polymer fiber-optic sensor for monitoring partial discharge (PD) activity in high-voltage polymeric insulation is presented in this work for non-destructive evaluation and dielectric testing applications. Dielectric weakness within polymeric insulation leads to partial discharge activity, generating ultrasonic acoustic waves that propagate through the medium. The developed sensing assembly comprises a conical polymer-based horn that gathers and concentrates the ultrasonic acoustic emission energy generated by dielectric weakness, and a single-mode …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 11–24 Read article
-
Design and Computational Analysis of Hybrid Carbon Fiber-Enhanced Metal Matrix Composite Spur Gears
Abstract: The automobile industry has to find the alternative solution for steel grade gears to overcome the weight to high strength ratio and thermal consideration with high damping properties. This study describes the design, FEM analysis, and performance evaluation of three new hybrid composite spur gears: a monolithic carbon fiber/epoxy (80/20 weight percent) composite (A), and two hybrids with steel (B) and aluminum (C) matrices (64% CF, 21% Epoxy, 15% metal). …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 158–172 Read article