Search
1969 articles for “ALS” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Wear Characteristics of Aluminium-Graphite Composites Produced by Stir Casting Technique
Abstract: Metal matrix composites (MMCs) are finding more applications due to their significantly improved properties such as high specific strength, high specific modulus, good damping capacity and good wear resistance compared to unreinforced alloys. In recent years, there has been an increasing interest in composites containing low density and low cost reinforcements. Graphite is one of the most suitable and low density reinforcement available for making light-weight and wear resistant parts …
Published in Journal of Materials & Metallurgical Engineering · Vol. 4, Issue 3, 2014 · pp. 13–20 Read article
-
Structure and Cube Texture Development Trend of Al4.5MgMn Alloy at Variable Annealing Conditions
Abstract: Hot-rolled Al4.5MgMn alloy was cold rolled to true strain levels 0.8, 1.6 and 2.3. Annealing at 300°C, 350°C and 400 °C was done to develop annealing structure. The annealed structures were measured by SEM-EBSD. The average grain size and grain size distributions were measured using Sigma-scan-Pro 5 structure analysis software. The average grain size and grain size distributions showed higher number frequency of lower annealing grain size with the increase …
Published in Journal of Materials & Metallurgical Engineering · Vol. 3, Issue 3, 2013 · pp. 32–38 Read article
-
Study on High Strength Ti-Al-V Alloy at Cryogenic Temperature
Abstract: The α+β type high strength titanium alloy is usually used as a structural biomaterial for the manufacturing of orthopaedic prostheses as well as surgical and dental implants. The Ti-Al-V alloy had been deliberately solution treated at 860°C for 1 h (subsequently quenched in variable mediums) just below the β transus but within the α+β region to avoid grain coarsening for single β region as well as accomplish optimum balance properties …
Published in Journal of Materials & Metallurgical Engineering · Vol. 13, Issue 1, 2023 · pp. 1–14 Read article
-
Mechanical Properties of Tri Sustainable NBR/Cement Waste/Rice Husks Silica Blend
Abstract: AbstractThe accumulation of agricultural and industrial manufacturing waste is an important environmental problem of the most countries in which the means of recycling these waste are not available. Therefore, it is important to find sustainable green engineering applications for the integration of these wastes in the industry and be an environmental, economic and industrial competitor and alternative to materials existing now. Cement waste and rice husks silica were added as …
Published in Journal of Polymer & Composites · Vol. 5, Issue 1, 2017 · pp. 29–31 Read article
-
Dissimilar Joining Of Aluminium Alloy to Copper Using Tungsten Inert Gas Welding Process
Abstract: Aluminium-copper dissimilar joints are applicable to electrical industry. 2 mm thick aluminium alloys (A1100) sheet is joined to 1 mm thick copper (Cu-DHP) sheet using tungsten inert gas welding (TIG) process. The effect of process parameters like heat input, torch orientation, arc weaving on mechanical properties of the joint are studied. In this combination the molten pool generated by melting of aluminium edge will wet the coppersurface to form a …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 5, Issue 2, 2018 · pp. 15–20 Read article
-
Twin Roll Casting of Aluminum Alloy AC7A
Abstract: Twin roll casting process is able to produce a strip from molten metal directly. Thus this process has a possibility to reduce total cost of sheet making comparing to conventional rolling process. Strip casting process has some disadvantages. Casting speed depends on the material properties. It is difficult to determine the casting conditions. Twin roll casting of aluminum alloy AC7A using commercial scale machine was operated. The aims of this …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 7, Issue 2, 2020 · pp. 30–36 Read article
-
Selective Attention Ability in Alcoholics and Non-Alcoholics
Abstract: Selective attention refers to the ability to focus on a particular activity by suppressing the background activities which may be taking place at the same time and the same place. The activity on which the focus is placed is termed as foreground and the other activity taking place simultaneously is called background. The present study aimed at studying selective attention in alcoholics and non-alcoholics by employing non-zero task and lexical …
Published in Research and Reviews : Journal of Computational Biology · Vol. 6, Issue 3, 2017 · pp. 16–19 Read article
-
Candida albicans: In vitro Inhibition of Morphological Transition by Analgesic Compounds
Abstract: This study aimed to investigate, in vitro, the effect of some analgesic compounds, which inhibit the activity of cyclooxygenase isoenzymes, on the morphological transition of Candida albicans from unicellular budding yeast to a filamentous form. C. albicans ATCC 10231 cultured in Sabouraud’s dextrose broth supplemented with 20% human serum for 72 h at 30 °C in the presence or absence of tramadol of HCl, ketorlac tromethamine, piroxicam and acetaminophen at …
Published in Research and Reviews: A Journal of Medicine · Vol. 3, Issue 3, 2013 · pp. 11–15 Read article
-
A Survey of Genetic Algorithm Applications in Nuclear Fuel Management
Abstract: The prime aim of nuclear fuel management is to achieve higher fuel utilization without compromising safety during reactor operation. Nuclear fuel management optimization is a classical nuclear engineering problem, which has been studied for more than four decades and several techniques have been used for its solution. Genetic algorithm is one among the major global optimization techniques, used in the field of nuclear fuel management. Aim of this paper is …
Published in Journal of Nuclear Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 45–62 Read article
-
Effect of Altitude and Habitat Characteristics on Growth and Reproductive Allocation in Paeonia emodi Wall. ex Royle
Abstract: AbstractThe present study was carried out to determine the impact of habitat variability and altitude on the morphoreproductive features of Paeonia emodi—an important medicinal plant of Kashmir Himalaya. The species exhibited great variability in its morphological traits under different environmental conditions. The plants were more vigorous and taller at a low altitude site, Kashmir University Botanical Garden (KUBG) while the plants of the high altitude site, Jawahar Tunnel were shorter. …
Published in Research & Reviews : Journal of Botany · Vol. 6, Issue 1, 2017 · pp. 5–12 Read article
-
Techno-economic Assessment of a Domestic Refrigerator with Aluminium-based Suction Line and Capillary Tube
Abstract: The present work reports the experimental performance evaluation of aluminum suction line-based domestic refrigerators. Furthermore, it compared domestic refrigerators with conventional copper capillary tubes and suction lines using R600a as a refrigerant. Performance parameters: energy consumption, ice-making time, and pull-down time was reduced significantly compared to conventional copper suction and capillary tube. Refrigerants having Ambient temperature for ice making test and pull down were initially set at 43°C and that …
Published in Journal of Polymer & Composites · Vol. 11, Issue 14, 2023 Read article
-
Review on Algae Biodiesel Production: A Strategy to Enhance Future
Abstract: The quest for cleaner and renewable energy sources has propelled the interest in the production of biodiesel from algae. Algae, due to their high oil content and fast growth rate, present a promising feedstock for the production of biodiesel, especially since they can be cultivated on non-arable land and with seawater or wastewater. Algae biodiesel offers the advantage of being compatible with current diesel engines without any need for modification, …
Published in International Journal of Biochemistry and Biomolecule Research · Vol. 1, Issue 2, 2023 · pp. 23–30 Read article
-
A Review on Aerospace Materials and Metallurgy
Abstract: Aerospace metalworking is comparable to the foundation of both space travel and transportation. It involves the scientific design and application of metals and alloys to offer components with the strength required for flight and the ability to survive harsh environments. Although other alloys feature cobalt or iron as the main ingredient, nickel makes up most of alloys used in aeronautical applications. When exceptionally high strength is required in moderate-temperature settings, …
Published in International Journal of Mechanical Dynamics and Systems Analysis · Vol. 2, Issue 1, 2024 · pp. 21–26 Read article
-
Revolutionizing Anti-Allergy Medications: A Comprehensive Review of Target Discovery and Medicinal Chemistry
Abstract: Above the past few decades, the prevalence of allergy illnesses has been steadily rising, impacting 20–30% of the world's population. Multiple targets are involved in allergic reactions to infections of the skin, digestive tract, and respiratory system. Developing medications with a good curative efficacy and minimal side effects while utilizing novel multi-targets and processes in accordance with the clinical features of various allergic populations and allergens is the primary challenge …
Published in International Journal of Advance in Molecular Engineering · Vol. 1, Issue 1, 2023 · pp. 49–54 Read article
-
Use of Alccofine and Porcelain Waste Aggregate in Concrete Composite for Strength Enhancement
Abstract: Building construction applications benefit from recent studies on alumino-silicate alkaline activation geo-polymers and their supplementary modifier alccofine as well as new process advancements characteristics including flexural strength and split tensile strength determine structural performance and durability. The construction sector utilizes supplementary cementitious materials, waste materials, and Geo Polymer Concrete (GPC) for concrete composites because it requires environmental sustainability along with better functionality and longer service life of concrete structures. This …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 23–33 Read article
-
Simultaneous Improvement of Mechanical Properties and Thermal Stability of Polyvinyl Chloride Nanocomposite by Magnesium Aluminum-Layered Double Hydroxide
Abstract: The application of nanoclays in polyvinyl chloride (PVC) is limited as the organic modifier of conventional nanoclays can degrade PVC. Using usual nanoclays could reduce thermal stability due to the catalytic effects on PVC degradation, so the main chalenge is to find suitable nanoclay for PVC. The effects of two nanoclays, MgAl-layered double hydroxide and alkylammonium-modified montmorillonite, were studied on the mechanical properties of PVC nanocomposites. Dioctyl phthalate (DOP)-plasticized PVC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 825–837 Read article
-
Comprehensive Study and Triggering Factors of Alcoholic and Non-Alcoholic Fatty Liver
Abstract: Over the past few years, fatty liver disease has turned out to be a rather widespread phenomenon and has become a serious issue with the global population nowadays. It comprises alcoholic fatty liver disease and non-alcoholic fatty liver disease, which develop under the influence of various initiating factors, though frequently follow similar pathologies. The overloading of lipids in the hepatocytes in most cases will be the first sign of the …
Published in Research and Reviews: A Journal of Pharmacology · Vol. 16, Issue 1, 2026 · pp. 43–52 Read article
-
The Rheological Effect of SiO2 Nanoparticles Additives for NBR/CR Blends
Abstract: The rheological alteration of NBR/CR after adding various nano-quantities of silicon oxide (0–50) wt.% was studied. The rheological properties that were tested are viscosity, scorch time, cure time and max torque. Oscillating disk rheometer was used for measuring the above properties. The experimental results have shown that the silicon oxide additives have a good effect on viscosity and max torque during vulcanization, but at the same time the scorch and …
Published in Journal of Catalyst & Catalysis · Vol. 4, Issue 3, 2017 · pp. 1–4 Read article
-
CHARACTERIZATION OF STRENGTH OF ALUMINUM (Al 6063-T6) AFTER CORROSION
Abstract: Aluminum are frequently used as light weight structure in various nautical design. One of them is the ship structure design where sever environment of saline water influences the damage of the structure and one among them is pitting. In this paper, an experimental verification of strength and impact of corrosion effect on Al-6063 – T6 aluminum was presented. The specimens were exposed to saline water for various duration like 500hrs, …
Published in Journal of Experimental & Applied Mechanics · Vol. 12, Issue 3, 2021 · pp. 48–61 Read article
-
Analysis of Machining Parameters in Wire EDM with Aluminum Alloy Using PCA and TOPSIS Approach
Abstract: Although the efficiency of traditional cutting processes is inadequate by the mechanical properties of the processed material and the intricacy of the work piece geometry, electrical discharge machining (EDM) being a thermal erosion process, is subject to no such limitations. This paper summaries the suitable use of Taguchi’s L27 orthogonal array which takes 27 experimental runs to develop a mathematical model for correlating the interactive and higher order impacts of …
Published in Journal of Mechatronics and Automation · Vol. 4, Issue 2, 2017 · pp. 1–11 Read article