Search
226 articles for “33/11KV”
Nothing matched all of your words, so these match any of them.
-
A Case Study: Diagnostic Testing of 16 MVA Power Transformer
Abstract: In this study describes the industrial research of tan delta test of power transformer (16 MVA 33/11 kV). In diagnostic test measurement, we check the insulation quality of power transformer. Transformer insulation quality is tested by insulation resistance test, tan delta and dissipation factor testing. In this article, we discussed about transformer tan delta test and comparison of transformer tan delta test result of after and before overhauling process. This …
Published in Journal of Power Electronics and Power Systems · Vol. 9, Issue 2, 2019 · pp. 1–4 Read article
-
A Novel Algorithm for an Optimal Reconfiguration of a Power Distribution System
Abstract: This paper presents a new optimization method based on the Hybrid Symbiotic organism Search Algorithm (HSOS) for the reconfiguration of a power distribution network for minimizing active power losses and maximizing voltage at each node. The HSOS method is a new metaheuristic algorithm that improves the Symbiotic organism Search (SOS) algorithm. This new technique is a combination of the SOS and the PSO (Particle Swarm Optimization) algorithm. It is applied …
Published in Journal of Power Electronics and Power Systems · Vol. 10, Issue 1, 2020 · pp. 9–17 Read article
-
Development of Slip Power Recovery Scheme sing Buck-Boost Chopper for Performance enhancement of Wound Rotor IM Drive
Abstract: This paper presents the mathematical modeling and testing of wound rotor induction motor drive (WRIMD) to develop the slip power recovery scheme (SPRS) using buck-boost chopper control techniques improving the performance of drive. The main focus of this research work is on the understanding of methodological development of Simulink model of SPRS. Various mathematical equations describing performance characteristics of WRIMD using SPRS with buck-boost chopper are derived. The performance parameters …
Published in Journal of Power Electronics and Power Systems · Vol. 12, Issue 2, 2022 · pp. 44–63 Read article
-
A review of the intelligent techniques for load forecasting of UHBVNL
Abstract: The primary aim of load forecasting is to know the change in power demand with the variable factors on a short-term, medium-term, and long-term basis and to evolve our power system network according to the changing variables. It ensures correct values to the operations, stability, demand management, scheduling generating capacity, efficiency, reliability, accuracy, economy, controlling, scheduling, security analysis, environmental sustainability, etc. Various forecasting techniques are there which are making it …
Published in Journal of Power Electronics and Power Systems · Vol. 13, Issue 3, 2023 · pp. 30–38 Read article
-
Review of Radial Drilling Technology and Viable Prospect in Mature Field Development in the Niger Delta
Abstract: A review of some Niger Delta oil field reservoirs indicates that most of the reservoirs are at the mature stages, thereby vulnerable to challenges such as; coning due to reduced size of the oil column, low oil production and lack of access to the residual oil trapped between existing wells of the mature field. Due to coning occurrences in the Niger-Delta oil field, most wells have been shut-in and a …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 2, 2015 · pp. 60–66 Read article
-
Study Analysis of Decisive Cost and Quality
Abstract: In this article, we discuss the beneficial level of a machine according to its features. Here, two methodologies are used to take decision according to some internal features and external aspects. First use analytical hierarchy process method for survey. Generally, parameters generated by analytical hieratical process (AHP) is preferred by consumers. Nowadays quality is most preferable parameter (in cutting machine use 46% approximate). Second one is productivity (33% approximate); we …
Published in Journal of Production Research & Management · Vol. 9, Issue 2, 2019 · pp. 20–28 Read article
-
Signal Integrity Analysis of Single Walled Carbon Nano Tube based Interconnects at 32 nm Technology Node
Abstract: The rising demands for ultra-high-speed processors and portable devices have made the transistor and interconnect scaling a challenging issue in present days. In this work, the impedance parameter of copper and CNT based interconnects are calculated at 32 nm technology node for different lengths. The performances of CNT based interconnects are analyzed and compared with Cu based interconnects in terms of crosstalk. The conventional copper interconnects are not able to …
Published in Journal of Semiconductor Devices and Circuits · Vol. 5, Issue 1, 2018 · pp. 33–42 Read article
-
Current Fed Push-Pull Converter for High Voltage Gain Applications
Abstract: AbstractAn isolated high step up voltage gain with appropriate duty ratio with application on energy storage system is proposed. As push pull converters are step down converters, here, this topology will help in step up the voltage. This converters semiconductor device maintains zero current switching (ZCS). Push pull converter has only two devices with common ground with source requiring simple gate driving circuitry.Keywords: Current fed push-pull, variable frequency modulation, zero …
Published in Journal of Semiconductor Devices and Circuits · Vol. 5, Issue 2, 2018 · pp. 33–42 Read article
-
Tracking of Maximum Power Point for SPV Systems
Abstract: AbstractThis paper presents the optimization algorithm based maximum power point tracking techniques. Optimization of output of shaded and un-shaded photovoltaic array under either it is static or dynamic whether condition is the primary goal of each MPPT techniques. There are various aspects of each MPPT techniques such as cost effectiveness, simplicity of hardware and software, its implementation, requirement of sensor, level of popularity, level of accuracy and its convergence speed. …
Published in Journal of Semiconductor Devices and Circuits · Vol. 6, Issue 3, 2019 · pp. 33–45 Read article
-
Enhanced Photovoltaic Performance of Perovskite Solar Cell Using Copper Thiocyanate (CuSCN) as Hole Transport Layer
Abstract: In this study, the SCAPS tool was utilized to examine the efficacy of perovskite solar cells using perovskite materials such methyl ammonium lead Iodide (MAPbX3, MA=CH3NH3, X: I). Quantitative simulation and modeling have been used to determine the electrical characteristics of the MAPbI3 material used for the active layer for a number of parameters, including fill factor (FF), short-circuit current density (Jsc), power conversion rate (PCE), and open-circuit voltage (Voc). …
Published in Journal of Semiconductor Devices and Circuits · Vol. 10, Issue 3, 2024 · pp. 12–18 Read article
-
Monitoring the Effect of Temperature and Time on the Characteristics of Metal Sample Corrosion Rate Inhibition using Selaginella myosurus and Pneumatoptens pennigera (GF) Plants
Abstract: This research showcases the effect of temperature and time on the characteristics of metal in terms of weight loss and corrosion rate using Selaginella myosurus or Pneumatoptens pennigera Plant. The weight loss was monitored at temperature range of >300OC to < 385OC and time period of 20hr to 120hr as well as decrease and increase was experienced. However, the research further demonstrates the decrease in weight loss of the metal …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 1, 2023 · pp. 10–19 Read article
-
Low Power High Speed Eight-Transistor (8T) SRAM Cell with Enhanced Data Stability
Abstract: The demand of static random access memory cell in embedded memories is rapidly increasing. To design SRAM is continuously becoming difficult due to limitation of weaker write margin, degraded data stability and higher leakage power consumption. In order to overcome these limitations, new 8T SRAM has been explored. The simulation results depicts better data stability, low access delay and decreased leakage power consumption. Alternatively, proposed cell with sleep transistor and …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 3, 2017 · pp. 35–44 Read article
-
Comparative Analysis of Different SRAM Cells Architecture at 70 nm
Abstract: There are severe constraints which affect the real time operation of SRAM cells. With increasing demand of device scaling, the performance parameters of SRAM cells are affected. Our main purpose is to maintain performance of memory cells in real time operation. Here, we considered three basic parameters stability, leakage current and delay for compression of various SRAM cell architectures. In this paper, we considered conventional 6T, asymmetric 7T, asymmetric 8T …
Published in Journal of VLSI Design Tools and Technology · Vol. 8, Issue 2, 2018 · pp. 33–41 Read article
-
Low Power High Speed Eight-Transistor (8T) SRAM Cell with Enhanced Data Stability
Abstract: The demand of static random access memory cell in embedded memories is rapidly increasing. To design SRAM is continuously becoming difficult due to limitation of weaker write margin, degraded data stability and higher leakage power consumption. In order to overcome these limitations, new 8T SRAM has been explored. The simulation results depicts better data stability, low access delay and decreased leakage power consumption. Alternatively, proposed cell with sleep transistor and …
Published in Journal of VLSI Design Tools and Technology · Vol. 7, Issue 2, 2017 · pp. 35–44 Read article
-
A Review on Assessment of Groundwater Quality for Irrigation and Domestic Purposes
Abstract: AbstractWater is the basic need without which life does not exist in the earth. It is well known that major portion of the earth is occupied by water, out of it only few amounts are fresh water and meant for drinking and other purposes like agriculture, industries, etc. Water occurs in the earth in different forms like surface water, groundwater, glaciers and seawater. Among which the groundwater serves the majority …
Published in Journal of Water Resource Engineering and Management · Vol. 5, Issue 1, 2018 · pp. 33–38 Read article
-
Geo-chemical Analysis of Arsenic in Medium Aquifers and Its Relation with Physical Parameters: A Study of Ballia District, India
Abstract: The main objective of this paper is to assess the spatial variation of arsenic (As) in medium aquifer and to relate it with surface elevation and slope generated using Shuttle Radar Topography Mission (SRTM) satellite data and water table. Water samples were collected in both pre- and post-monsoon season in 2011. The analysis of water samples for As were carried out by using atomic absorption spectrophotometer (AAS). Total 33 water …
Published in Journal of Water Resource Engineering and Management · Vol. 2, Issue 1, 2015 · pp. 38–50 Read article
-
Effect Of Different Shapes Of Air Diffusers On Removal Of Chemical Oxygen Demand Of Wastewater In Activated Sludge Process
Abstract: AbstractOne of the challenges faced in activated sludge process is the low solubility of oxygen in wastewater, affecting the microbial activity due to mass transfer limitations and ultimately hampering the effluent quality. To overcome this limitation various types of diffusers have been in use but the configuration in which the aerators must be placed is still an open question. A series of experiments were conducted using different shapes of diffuser …
Published in Journal of Water Resource Engineering and Management · Vol. 7, Issue 2, 2020 · pp. 9–14 Read article
-
Computation Analysis of Selected Communities Water Quality Assessment
Abstract: The study is aimed at evaluating water quality based on assessed parameters for Ede, Erema, Obagi and Oboboru Communities groundwater. The mathematical computations using water quality index model (WQI) reveals WQI ranges as 53.89, 23.85, 33.06 and 36 for Ede, Erema, Obagi and Oboboru Communities indicating poor water quality for Ede Community and good water quality for Erema, Obagi and Oboboru Communities. Therefore, there is need to treat groundwater from …
Published in Journal of Water Resource Engineering and Management · Vol. 9, Issue 1, 2022 · pp. 1–7 Read article
-
Comparative Study on the Compressive Strength of Bacterial Concrete using Spirulina and Bacillus Subtilis
Abstract: The bacterial concrete has remarkable advantages over ordinary concrete in self-repairing itself when cracked, and it proves to be an environmentally safe building material to be used. The objective of the present study is to investigate the feasibility of using Spirulina in bacterial concrete. A comparative study on the compressive strength of M30 grade of concrete using Spirulina and Bacillus Subtilis (B.Subtilis) were carried out. Volume of Spirulina and B.Subtilis …
Published in Recent Trends in Civil Engineering & Technology · Vol. 8, Issue 2, 2018 · pp. 18–22 Read article
-
Effect of Fiber Hybridization on Compressive Strength and Water Permeability of Steel Fiber Reinforced Concrete
Abstract: The paper presents results of an investigation conducted to study the compressive strength and water permeability of hybrid steel fiber reinforced concrete (HySFRC). Steel fibers of different lengths, i.e., 12.5, 25 and 50 mm having constant diameter of 0.6 mm were systematically combined in different mix proportions to obtain mono, binary and ternary combinations. Mixes with no fibers were also cast for comparison purpose. Three fiber volume fractions, i.e., 0.5, …
Published in Recent Trends in Civil Engineering & Technology · Vol. 4, Issue 1, 2014 · pp. 11–16 Read article