Search
403 articles for “tensile strength”
-
Tensile and Flexural Strength Quantification of Basalt-Reinforced Epoxy Composites Fabricated via Vacuum-Assisted Resin Transfer Molding at Varied Fiber Volume Fractions Description
Abstract: Fiber-reinforced polymer composites have been identified to possess excellent properties that render them very suitable in the aerospace, automotive, marine and renewable energy sectors. However, for the industrially scalable vacuum-assisted resin transfer molding (VARTM) process, optimization of mechanical properties of basalt epoxy composites must be achieved systematically, which means that the effect of the fibre volume fraction(VF) on the mechanical properties of the composite needs to be quantified for different …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Experimental and Polynomial Regression Modelling of Tensile Characteristics of Hybrid Jute/Hemp Fiber Composites
Abstract: The present study aims to develop hybrid jute-hemp fiber/epoxy composites by the hand lay-up process with 60% of fiber reinforcement and 40 % of matrix ratio. To measure the change of tensile properties, prepared hybrid composites were tested for normal tensile strength and edge notch tensile (ENT) test as per the ASTM standards. Findings show that, developed composites with reported tensile strength followed by comparing it with fracture toughness. Experimentally, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 47–58 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
Investigating the Combined Effect of FDM 3D Printing Parameters on Tensile Behavior of ABS Plastic Using Taguchi Method.
Abstract: Fused Deposition Modelling (FDM) is a commonly utilized method in additive manufacturing. FDM is greatly affected by its printing parameters, which is why selecting the proper parameters is crucial for obtaining the desired properties of 3D printed parts. In this paper we have experimentally and statistically studied the influence of FDM 3D printing parameters (infill pattern, infill density and layer thickness) on tensile strength using Acrylonitrile Butadiene Styrene (ABS) filament. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 5, 2024 · pp. 161–169 Read article
-
Microstructural Characterisation and Analysis of Mechanical Behaviour of Hybrid AA 7075/7178 Fabricated Using Die Casting Technique
Abstract: AA are being increasingly used in the field of structural engineering owing to their desirable mechanical properties coupled with their recyclable and sustainable nature, thus contributing significantly towards reduction of carbon footprints and development of circular economy. Till date numerous research projects have been prompted to investigate the structural performance of aluminium alloy structures and develop alternatives with enhanced performance parameters. AA 7xxx (Al-Zn-Mg-Cu) are being widely used in variety …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 441–451 Read article
-
Thermal and Mechanical Properties of Zn-Fap Composites
Abstract: The aerospace and automotive industries have experienced a substantial surge in interest in innovative composite systems driven by the ongoing demand for lightweight, high-performance materials. In this study, the mechanical properties of zinc (Zn) matrix composites reinforced with fluorapatite particles (Fap) are examined as a function of thermal treatment. Within the context of this investigation, we endeavoured to create composite materials containing Zinc-Fluorapatite powder. Stir casting was used to produce …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1101–1110 Read article
-
Machine Learning-Assisted Design and Optimization of Lightweight Polymer Composites for IoT-Enabled Automotive Applications
Abstract: This study aims to develop an integrated machine learning and optimization framework for the intelligent design of lightweight polymer composites suited for IoT-enabled automotive applications. The goal is to enhance material performance while satisfying multiple design constraints such as mechanical strength, thermal stability, and process compatibility. A curated dataset of polymer composite formulations was used to train a Random Forest Regression (RFR) model capable of predicting tensile strength, thermal conductivity, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 12–27 Read article
-
Comparative Experimental Investigation of Infill Pattern and Infill Density on Fused Deposition Modeling (FDM) Process Characteristics of Polylactic Acid (PLA)
Abstract: Additive manufacturing is the potential and emerging technology widely being used to produce quality products with complicated profiles and customized features. Fused Deposition Modelling (FDM) process, a type of additive manufacturing technology using filament made of thermoplastic which is melted and subsequently extruded through nozzle. The main input process parameters of FDM are wall thickness, infill density, layer height, bed temperature, layer thickness, infill pattern, nozzle temperature etc. In this …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 335–345 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Mechanical and Physicochemical Characteristics of Nano-Hydroxyapatite Polymer Composites
Abstract: This study focuses on the development and characterization of nano-hydroxyapatite (nHAp)-reinforced poly (lactic acid) (PLA) composites for biomedical applications. The composites, prepared with varying nHAp content (5–25 wt%), were evaluated for their mechanical and physicochemical properties, including tensile strength, Young’s modulus, elongation at break, thermal stability, hydrophilicity, and crystallinity. Results revealed that tensile strength increased significantly with the incorporation of nHAp, reaching a peak of 62 MPa at 15 wt%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 115–125 Read article
-
Experimental Analysis of Aramid Fiber Reinforced with Tungsten Carbide
Abstract: This study investigates the mechanical performance of aramid fiber-reinforced epoxy composites enhanced with varying weight percentages of tungsten carbide (WC) powder as a secondary reinforcement. The composites were fabricated using both the hand lay-up and vacuum bagging techniques to ensure uniform dispersion of materials and quality surface finish. Tungsten carbide particles with an average size of 4 microns were incorporated into the aramid fiber matrix at incremental concentrations of 0%, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 146–157 Read article
-
Enhancing Mechanical Properties by Parameter Optimization in Fiber and Particle Reinforced Composites
Abstract: This research focuses on optimizing the mechanical and thermal properties of hybrid fiber and particle-reinforced composites through systematic parameter optimization using the Taguchi method and Grey Relational Analysis (GRA). Composites were fabricated using varying fiber volume fractions (20%, 30%, and 40%), particle sizes (20 μm, 60 μm, and 100 μm), and curing temperatures (60°C, 80°C, and 100°C) in a 3-factor, 3-level experimental design. Key properties such as tensile strength, impact …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 75–85 Read article
-
Review in Friction Stud Welding of Aluminium to Steel
Abstract: The demand for friction stud welded aluminum/steel joints has increased in many significant applications including cryogenics, structural engineering, spacecraft, rocket fuel tanks and high vacuum chambers owing to their superior properties. In automobile engineering, there is a requirement to join a mild steel earthing pin which is in the shape of a stud to an aluminum car body. Aluminum and steel was considered to join using friction stud welding. This …
Published in Journal of Thermal Engineering and Applications Read article
-
Enhancing Physical Properties of Unfilled SBR Rubber Compounds using Nano CaCO3 Additive
Abstract: The push for rubber compounds with improved characteristics in the rubber industry has sparked extensive research strategies for developing novel rubber compounds with improved properties like tensile strength, abrasion resistance, rolling resistance and flex properties etc., especially for the automobile industry. To intensify the processability, performance, and look of materials such as plastics, rubbers, paints, color, printing, and lubricants, additives are often employed to improve their qualities and overall value …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 40–49 Read article
-
Experimental Evaluations of the Tensile and Impact Characteristics of Polypropylene Composites Reinforced with Hybrid Fibers
Abstract: In marine engineering design, polymeric composites reinforced with natural fibers are frequently used. Through hybridization, natural fiber plastic composites' mechanical properties can be improved. Assessing the performance of recycled newspaper fiber (rNF) and rNF/glass fiber (GF) hybrid polypropylene composites is the aim of the current experiment. Using maleic anhydride (MA) as a coupling agent, the effects of GF loading on the impact strength and tensile behavior of composite materials with …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 1, 2025 · pp. 30–39 Read article
-
Evaluation of Modified Nanoparticles' Effects on Polypropylene Composites
Abstract: Numerous sectors use nanoparticles and nanocomposites in a range of applications, including medicine, textiles, cosmetics, agriculture, optics, food packaging, optoelectronics, semiconductors, aerospace, building materials, and catalysis. Polymeric nanocomposites, which combine organic polymers with inorganic nanoparticles, are a novel family of materials that perform better than their microparticle counterparts. They should therefore enhance the field of engineering applications. A polymer matrix's characteristics can be drastically changed by the addition of inorganic …
Published in International Journal of Pollution: Prevention & Control · Vol. 1, Issue 2, 2023 · pp. 23–34 Read article
-
To Study Properties of Concrete by Using Manganese Ore Aggregate
Abstract: Aggregate is one of the major ingredients of the concrete and the maximum part of strength of the concrete is governed by the aggregate. And thus, partial or total replacement of it can change the physical as well as the chemical properties of the concrete. Nowadays researchers are quite interested in obtaining the more durable and more resisting concrete to the diverse climatic conditions. In this research, aggregate is proportionately …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 2, 2024 · pp. 38–45 Read article
-
Empowering Concrete: Enhancing Strength and Durability with Coal Bottom Ash
Abstract: The utilization of coal bottom ash, an industrial waste byproduct, as a sustainable alternative to river sand in concrete production has gained increasing attention due to environmental concerns and the need for resource optimization. This study examines how incorporating coal bottom ash into concrete mixtures, either partially or entirely replacing river sands, affects different properties. These properties include the workability of fresh concrete, as well as its compressive strength, splitting …
Published in Recent Trends in Civil Engineering & Technology · Vol. 14, Issue 1, 2024 Read article
-
Optimization of Polymer-Enhanced Sustainable Concrete: A Composite Approach with Bentonite and Crumb Rubber Aggregates
Abstract: The disposal of rubber tyres has become challenging; on the other hand, the utilization of rubber tyres is also increasing daily in society. The successful use of crumb rubber as an alternative aggregate and bentonite as a partial cement replacement in concrete composites has been well established through prior research. These materials have individually demonstrated their potential to enhance sustainability, improve concrete properties, and reduce environmental impact, paving the way …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 701–715 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article