Search
150 articles for “elastic properties”
-
Nanocomposites Based on LDPE–EVA Thermoplastic Elastomer (TPE): Effect of Laponite Clay
Abstract: The effect of pristine and modified laponite RD and RDS on a model low-density polyethylene (LDPE)—ethylene vinyl acetate copolymer (EVA) thermoplastic elastomer (TPE) blend system is explored in this article. The nanoclay particles are melt-blended with the LDPE–EVA system at 1.5 wt% loading. Both laponite RD and RDS are modified by ion exchange method utilizing dodecyl ammonium ion to improve the interaction of clay particles with polymer matrix. The blends …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 17, Issue 3, 2015 · pp. 17–27 Read article
-
Modelling of Concrete Slab Tensile Stresses for Apron International Al-Najaf Airport
Abstract: The objective of this study was to develop Three Dimensional Finite Element Model (3D-FEM) that can be used to investigate the structural analysis of apron area plain and reinforced concrete slab under Airbus A380-800 aircraft land gear loading. The computer program ANSYS (2014) was selected to develop 3D-FEM for this study. Suggested rigid pavement for apron area was studied with different thickness (20,30, 40 and 50 mm) and Young modululi …
Published in Trends in Transport Engineering and Applications · Vol. 3, Issue 2, 2016 · pp. 7–18 Read article
-
Review on Hair Cosmetics on Flaxseeds
Abstract: Worldwide cultivation of flaxseed (Linum usitatissimum), a significant medicinal oil seed crop, is practiced. Flaxseed belongs to the Linaceae family.Because of its biologically active components, which include lignans, dietary fiber, and alpha-linolenic acid, flaxseed has garnered interest as a functional food ingredient recently.Worldwide, Flaxseed is cultivated not only for its oil and fiber but also for its nutritional and potential therapeutic benefits. The dietary fiber present in flaxseed supports overall …
Published in Research and Reviews : A Journal of Ayurvedic Science, Yoga and Naturopathy · Vol. 12, Issue 2, 2025 · pp. 38–46 Read article
-
A Review on Formulation and Evaluation of Polyherbal Face Sheet Mask.
Abstract: This research focuses on the formulation and evaluation of a polyherbal face sheet mask developed using natural herbal ingredients to address common skin concerns such as acne, dullness, pigmentation, sun damage, dark spots, and uneven skin tone. With the increasing demand for safe, eco-friendly, and chemical-free skincare products, herbal-based cosmetic formulations have gained significant attention due to their therapeutic properties, minimal side effects, and enhanced consumer acceptance. Face sheet masks …
Published in Research & Reviews : Journal of Herbal Science · Vol. 15, Issue 2, 2026 · pp. 8–15 Read article
-
Development of PU/Graphene Anticorrosion/antifriction coatings
Abstract: Corrosion inhibition and reduction of frictional wear is a necessary requirement in launch vehicles. Organic coating proves to be the cheapest and most advantageous owing to its high mechanical resistance and high adhesion, better chemical stability, low permeability for corrosive components etc. Among the organic coatings reported, Polyurethane is found to be the most suitable candidate it being relatively durable, softer and more elastic than other organic coatings. However, graphene …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 10, Issue 2, 2023 · pp. 45–56 Read article
-
Prediction of Mechanical Properties for Advanced Engineering Applications utilizing Polymer Composite Materials by Machine Learning
Abstract: Polymer composites show great promise as engineering materials because of their mechanical performance, resistance to corrosion, lightweight nature, and adaptability in design. Aerospace, automotive, biomedical, maritime, and civil engineers all rely on mechanical property prediction to cut down on trial expenses, expedite product development, and optimize material selection. Speedy design optimization is not possible using traditional numerical and experimental methods due to the high costs associated with material characterisation, computational …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 1258–1284 Read article
-
Performance Evaluation of Rubber Crumb-Modified Bitumen for Sustainable Pavement Applications
Abstract: This research investigates the effect of rubber crumb modification on the physical and mechanical properties of VG-40 bitumen for flexible pavement applications. Rubber crumbs were incorporated at varying percentages (0, 8, 10, 12, 14, and 16%) to analyze their impact on penetration, softening point, ductility, and elastic recovery. Additionally, the Marshall stability test was conducted to evaluate the strength and deformation characteristics of the bitumen mix. The results demonstrated a …
Published in Journal of Geotechnical Engineering · Vol. 12, Issue 2, 2025 · pp. 20–24 Read article
-
Design and Performance Analysis of Sustainable Hybrid Composites for Impact Absorption and Lightweight Applications.
Abstract: This study explores the mechanical and structural properties of a novel hybrid composite composed of recycled tyre rubber, ceramics, and wood. The investigation focuses on key parameters, including energy absorption, compressive and tensile strength, and density, to evaluate the composite's suitability for diverse applications. The impact energy absorption test revealed that Sample A, comprising 50% rubber, 25% ceramic, and 25% wood, exhibited the highest energy absorption capability, with an average …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 95–104 Read article
-
Computational Modeling of Fluid Flow through A Fractured Media under Overburden Pressures
Abstract: Computational analyses were conducted to investigate fluid flow characteristics of a real fractured media. Finite element (FE) and computational fluid dynamics (CFD) analyses were implemented to carry out these computational analyses. The fractured media was exposed to external pressurization to predict permeability and asperity deformation. Furthermore, a series of CFD-FE analyses were also conducted to determine the reduction in permeability of the fractured media under the external pressure. An elastic-plastic …
Published in Journal of Petroleum Engineering & Technology · Vol. 5, Issue 1, 2015 · pp. 25–43 Read article
-
Experimental Investigation on Mechanical Properties of Concrete Replacing of Steel Slag as Coarse Aggregate
Abstract: The basic objective of this study was to identify alternative source of good quality aggregate which is depleting very fast due to the fast pace of construction activities. This paper describes the optimum level of replacement of Energy Optimized Furnace (EOF) steel slag by weight of coarse aggregate for a mix proportion of M20 grade concrete to find out the optimum ratio of steel slag. Civil Engineers have been challenged …
Published in Journal of Structural Engineering and Management · Vol. 4, Issue 2, 2017 · pp. 44–49 Read article
-
STUDY OF THE RHEOLOGICAL, PHYSICAL-MECHANICAL PROPERTIES OF DISPOSED POLYPROPYLENE AND POLYVINYL CHLORIDE BINARY MIXTURES
Abstract: In this study, various compositions were prepared by modifying the decommissioned polypropylene (PP)-based polymer waste with polyvinyl chloride (PVC) in different proportions for the purpose of modification, and the flow index and physical and mechanical properties of their alloys were studied. As a result of the research, the following results were obtained. PP/PVC binary compositions were prepared and samples were obtained based on 6 different proportions by changing the amount …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 Read article
-
Aerogel Composite from Scope–A Study
Abstract: This article is a study of nano-metric porous dimension so as to originate open scripture to allocate semi-composite organized after drying. Particulate merged add an addendum anew formation to subdivide inter atoms to bond nano-composite ingredients. Properties of matter have been identified to be lower than 100 nm. Reinforce of aerogel as blanket has been designated to bear as usual insulation upon typifying configurative scope as substrate to cover. Adjoined …
Published in Journal of Materials & Metallurgical Engineering · Vol. 11, Issue 1, 2021 · pp. 1–12 Read article
-
ML-Based Predictive Modeling of Mechanical Properties in 3D-Printed Polymer Composites for IoT Applications
Abstract: This study aims to develop an interpretable and high-accuracy machine learning framework for predicting the mechanical properties of 3D-printed fiber-reinforced polymer composites, with a focus on structure–property correlations relevant to polymer processing and functional performance. Composite specimens based on PLA and ABS matrices were fabricated using FDM with varying weight fractions (5–20 wt%) of carbon and glass fibers. Standardized mechanical testing (ASTM D638, D256, D790) was performed to evaluate tensile …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 61–78 Read article
-
Bioinspired Nanocomposite Bone Pins: Fabrication, Evaluation, and Suitability for Orthopedic Implant Applications
Abstract: Bone tissue engineering (BTE) requires scaffolds that mimic bone’s mineral–organic composition, offering mechanical strength, bioactivity, and degradation rates compatible with regeneration. Conventional metallic implants face corrosion and toxic ion release risks, while ceramics like hydroxyapatite (HAp) are bioactive but brittle. This study reports a multifunctional hybrid scaffold combining HAp for osteoconductivity; polycaprolactone (PCL) and collagen for flexibility and biocompatibility with sodium citrate for nanoparticle dispersion, ferrocene (Fc) for catalytic bioactivity; …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 526–540 Read article
-
Using FEA Simulation and Photoelasticity Techniques to observe Integrated Stress Pattern for Transparent Polycarbonate Rectangular Specimen having Arc Feature
Abstract: In the fields of mechanics and materials science, photoelasticity is a reliable experimental method that provides a visual evaluation and analysis of the distribution of stress in materials that are transparent or translucent. This non-destructive testing technique uses the special property of materials known as birefringence, or double refraction, to visualise stress on a model under load. The process involves building a physical model that mimics real-world structures, applying mechanical …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 55–63 Read article
-
Polymer-Based Medical Restraints: Advances in Polymer Chemistry for Enhanced Patient Safety
Abstract: Medical restraints play a crucial role in ensuring patient and staff safety during medical procedures, particularly when dealing with individuals who may be at risk of self-harm or unintentional movement. Traditional restraints, often made from rigid materials or fabric straps, present several challenges, including patient discomfort, pressure injuries, and incompatibility with advanced medical imaging techniques such as MRI and CT scans. Moreover, traditional materials may deteriorate over time, diminishing their …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 153–157 Read article
-
Integrated Analysis of Stress Patterns in Transparent Polycarbonate Specimens: A Comparative Study between Photoelasticity and FEA Simulation for Compact Circular Testing
Abstract: Photoelasticity stands as a robust experimental technique within the realms of mechanics and materials science, offering a means to visually assess and analyze stress distribution within materials possessing transparency or translucency. This method, a non-destructive testing approach, involves the visualization of stress on a model subjected to a load, leveraging the unique property of materials known as birefringence or double refraction. The procedure entails the careful selection of a suitable …
Published in Journal of Polymer & Composites · Vol. 12, Issue 4, 2024 · pp. 79–87 Read article
-
Comprehensive Review of EPDM (Ethylene Propylene Diene Monomer) Rubber
Abstract: The terpolymer elastomer known as ethylene propylene diene monomer (EPDM) is made up of ethylene and propylene with trace amounts of a non-conjugated diene as a third monomer. This elastomer was created using the idea of limited olefinic functionality, which is brought about by diene monomer incorporating unsaturation into the polymer backbone. This random elastomeric copolymer, which has a fully saturated polymer backbone, has intriguing qualities such as good heat …
Published in Emerging Trends in Chemical Engineering · Vol. 12, Issue 2, 2025 · pp. 27–34 Read article
-
Stiffness of Concrete Flexural Members Increases on Use of Shape Memory Alloy Bars as Reinforcement
Abstract: This paper describes the properties of Shape Memory Alloys (SMAs) and its useful aspect towards utilization in civil engineering structures. The non-linear material behavior in terms of shape memory effect, superelasticity, martensite damping and variable stiffness is presented. The values of effective moment of inertia and cracking moment, of treated and controlled Reinforced Concrete (RC) beams were determined using ACI 318, AS 3600 and CEB-FIP model codes. Treated beams were …
Published in Recent Trends in Civil Engineering & Technology · Vol. 2, Issue 1-3, 2012 · pp. 124–138 Read article
-
Exploring the Effect of Modified Nanosilica on a Model LDPE–EVA-based TPE System
Abstract: The effect of modified nanosilica particles on a model low-density polyethylene (LDPE)–ethylene vinyl acetate copolymer (EVA) based thermoplastic elastomer (TPE) blend system is explored in this article. Modified nanosilica particles were melt-blended with the LDPE-EVA system at 1.5, 3, and 5 wt% loadings through the variation of the sequence of addition. The blends were compression molded, and their morphological, rheological, mechanical and thermal properties were evaluated. The properties of the …
Published in Nano Trends – A Journal of Nano Technology & Its Applications · Vol. 17, Issue 3, 2015 · pp. 6–16 Read article