Search
1986 articles for “failure-prediction AUROC of 0.967” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
Nothing matched all of your words, so these match any of them.
-
An Investigation of Binders for the Production of Biomass Briquettes from Sawdust and Cow Dung Admixture
Abstract: This study explored an investigation on the effect of binders for the production of biomass briquette from saw dust and cow dung admixture for domestic cooking applications. The materials used to investigate the study were sawdust and cow dung was treated, and the sawdust was grind and screened using sieve mesh size into particle size of 2mm. The biomass briquettes were produced by mixing sawdust and cow dung within the …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 1–11 Read article
-
Investigation of Characteristics of Vernonia amygdalina Stem on Remediation of Crude Oil Polluted Loamy Soil Environment
Abstract: The effectiveness of Vernonia amygdalina in Total Petroleum Hydrocarbon (TPH) mitigation in a loamy soil environment was monitored using mixture of 100ml of Crude oil, 2kg of loamy soil and 25g to 100g of remediant determined. The experiment was set-up based on the design concept considered as presented in this research, which involved constant volume of 100ml of crude oil, constant mass of 2kg of loamy and changes in mass …
Published in Emerging Trends in Chemical Engineering · Vol. 10, Issue 2, 2023 · pp. 23–30 Read article
-
Reduction of Electric Vehicle Driving Range Due to Battery Capacity Fading
Abstract: This paper is mainly focused to the estimation of the reduction of the driving range in electric vehicles due to battery capacity fading as a consequence of the aging effects with cycling. A scale model reproducing the real driving conditions in electric vehicles has been used to develop a simulation process to evaluate the incidence of the cycling on the battery capacity fading. The model on which the simulation has …
Published in Journal of Automobile Engineering and Applications · Vol. 8, Issue 2, 2021 · pp. 1–16 Read article
-
Utilization of Fish Excreta for Algae Production
Abstract: AbstractAlgae has been existing on earth since its beginning but its prospective advantages have recently been understood and hence it is now being considered to play a major role in solving some of the most critical problems of the world. However the high cost of algae production is the biggest obstacle in making algae a mainstream candidate for the development of various products. The current study tried to reduce the …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 8, Issue 3, 2017 · pp. 9–17 Read article
-
Analysis of The Performance of A PV/PCM System in Variable Solar Radiation Conditions
Abstract: This paper studies the performance of a PV/PCM system operating at variable solar radiation conditions. The system has been tested for six different solar radiation levels, from 250 W/m2 to 950 W/m2 determining the steady-state temperature for every case. An algorithm has been developed to predict the steady-state temperature. This prediction has produced values within 97% accuracy of experimental data. A reduction of temperature up to 18.9ºC has been achieved. …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 12, Issue 1, 2021 · pp. 1–20 Read article
-
Role of Solid Acid Catalyst in Isopropylation Reaction
Abstract: Cumene synthesis was carried out by the reaction of benzene with isopropyl alcohol in the vapour phase over rare earth metal modified 13X zeolite. Zeolite modification was done by exchanging sodium ions of the zeolite with cerium ions to vary the acidity of the catalyst in the range of 0.25‑1.36 meq/g. The synthesis was carried out over a wide range of operating conditions. The synthesis conditions were optimized by studying …
Published in Journal of Catalyst & Catalysis · Vol. 2, Issue 2, 2015 · pp. 19–26 Read article
-
Performance Evaluation of H 2 SO 4 -Rice Husk-Moss Adsorbent for the Removal of Zn (II) Ion from the Effluent of Science Equipment Development Institute (SEDI)
Abstract: This research was carried out to investigate the potential of green algae (moss) with the support of H 2 SO 4 treated rice husk activated carbon using batch adsorption process for the removal of Zn (II) ions from SEDI industrial effluent. The rice husk- moss algae was activated using H 2 SO 4 . The effluent was characterized using atomic absorption spectrophotometer with initial concentration values of 12.3 mg/l for …
Published in Journal of Catalyst & Catalysis · Vol. 9, Issue 1, 2022 · pp. 6–15 Read article
-
Geotechnical Assessment and Stabilisation of Lateritic Soils in Tarkwa Using Rice Husk Ash for Road Construction Purpose
Abstract: The cost effectiveness of upgrading gravel roads to a sealed standard has challenged road authorities to make optimum use of naturally occurring materials such as laterites as sub-base and base materials. Untreated laterites have presented problems such as pavement swelling and depression in road construction. This research seeks to assess and stabilise the geotechnical properties of some lateritic soils in Tarkwa using Rice Husk Ash for road construction purposes. Lateritic …
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 1, 2019 · pp. 6–16 Read article
-
Performance of Polyster Fibre Reinforced Concrete
Abstract: The present work deals with the results of experimental investigations on Recron 3s Polyester fibre reinforced concrete. Effect of these fibres on various strengths of concrete are studied. Firstly 0.1% fiber content is used and after that varied from 0.2 to 1.8% at an interval of 0.2% by weight of cement. Various strengths considered for investigation are compressive strength, flexural strength, split tensile, bond strength and shear strength. Cube of …
Published in Journal of Construction Engineering, Technology & Management · Vol. 9, Issue 2, 2019 · pp. 37–46 Read article
-
Study of Nano Additives in Concrete mix Proportioning Using Nano Particle
Abstract: This research literature reviews on nanomaterials in concrete. Now, the conventional concrete Properties of nanomaterial utilization have been introduced to various attentions to increase. Ultimately, as an introduction, the nanomaterial is increasing the strength and durability of the Concrete. The nanomaterial is described as the material that includes the particle size Less than 200 nm. While the investigation of Concrete in the importance of nanomaterials, the demand is at least …
Published in Journal of Construction Engineering, Technology & Management · Vol. 10, Issue 1, 2020 · pp. 37–48 Read article
-
The Study on Properties of Concrete with Cement Partially Replaced by Corn Cob Ash
Abstract: In recent times, instead of cement many alternative materials are being used as the binding material in the construction sector. One such binding material that can be used as a partial replacement for cement is corn cob ash. Corn cob is agricultural waste product obtained from maize or corn. Corn cob is the hard thick cylindrical central core of maize. The tests were carried out on the raw materials to …
Published in Journal of Construction Engineering, Technology & Management · Vol. 6, Issue 1, 2016 · pp. 78–83 Read article
-
Influence of Mineral Admixture on Compressive Strength of Concrete
Abstract: The current paper shows the results of an investigation focused on the effect of metakaoline (MK) and silica fume (SF) on the compressive strength of concrete. The aim of the study was to investigate the effect of concrete compressive strength containing different percentage levels of metakaoline and silica fume on fresh and mechanical properties of the concrete. Pastes containing 0%, 5%, 10%, 15% and 20% of metakaoline and silica fume …
Published in Journal of Construction Engineering, Technology & Management · Vol. 2, Issue 1-3, 2012 · pp. 42–47 Read article
-
Optimum Mixture Proportioning of Sawdust Ash Blended Sand-Stone Dust Blocks Using Scheffe’s Regression Theory
Abstract: This study carried out an experimental investigation on the compressive strength of sawdust ash blended sand-stone dust block of size 450 x 225 x 150 mm using Scheffe’s (5, 2) regression theory. The compressive strength of sawdust ash blended sand-stone dust blocks obtained based on fifteen trial mix ratios were used to develop the mathematical model while the results of the compressive strength values obtained based on the additional fifteen …
Published in Journal of Construction Engineering, Technology & Management · Vol. 13, Issue 2, 2023 · pp. 33–40 Read article
-
Two Degrees of Freedom Observer Controller for Load Frequency Control with Communication Delay
Abstract: Two degrees of freedom (2-DOF) Smith predictor based observer controller is designed for load frequency control of two area systems with communication delay. The conventional proportional integral (PI) controller is used for command tracking and an independent observer based feedback controller is designed for disturbance of change in load demand. In interconnected power system, the presence of communication delay complicates the design and implementation of the controller. The original delayed …
Published in Journal of Control & Instrumentation · Vol. 8, Issue 2, 2017 · pp. 35–44 Read article
-
IoT Based SCADA for Electrical Measurements and Control
Abstract: The suggested system's primary goal is to shield electrical equipment against malfunctions. Thesystem consists of various sensors that deployed strategically on electrical equipment. The data of theequipment is collected and transmitted to cloud platform through Node MCU ESP8266. The data issimultaneously displayed using LCD display. The collected data is splitted into train and test data.Train the machine learning model by using different algorithms. The best algorithm is chosen bycalculating their …
Published in Journal of Control & Instrumentation · Vol. 14, Issue 2, 2023 · pp. 38–47 Read article
-
Modeling of Sintering Process for the Preparation of Magnetic Abrasives by RSM and ANN Models
Abstract: In this study, a modeling has been done for the prediction of the sintering process, as sintering process is one of the best processes to prepare magnetic abrasives. The sintering process is modelled by using RSM and ANN techniques. The ANN model has been developed using a multilayer feed-forward neural network and trained with the help of an error backpropagation learning algorithm based on the generalized delta rule. The indication …
Published in Journal of Experimental & Applied Mechanics · Vol. 10, Issue 3, 2019 · pp. 5–12 Read article
-
Design and Analysis of Bootstrap Sample and Hold Circuit
Abstract: This paper describes the design and implementation of open-loop sample and hold-circuit using bootstrap technique, which can be used as front end sampling circuit for high-speed analog-to-digital converters. Different design criteria, viz., speed, power, resolution, linearity, noise and harmonic analysis have been dealt with. Both theoretical analysis and simulation results are carried out. The bootstrap circuit is designed and then compared in a 0.18 and 0.35 μm CMOS process. It …
Published in Journal of Electronic Design Technology · Vol. 5, Issue 3, 2014 · pp. 7–14 Read article
-
Fleet Guard: Advanced Fleet Management and Vehicle Monitoring System
Abstract: FleetGuard: Advanced Fleet Management and Vehicle Monitoring is a game changing IoT solution, crafted using Flutter in the Dart language, set to revolutionize conventional fleet management practices. It seamlessly integrates software and hardware components, with a primary focus on Tire Pressure Monitoring Systems (TPMS) and GPS sensors. This innovative system offers real-time tire pressure monitoring, predictive maintenance, and driver behavior analysis, emphasizing efficiency and safety, ultimately reducing operational costs, and …
Published in Journal of Electronic Design Technology · Vol. 14, Issue 2, 2023 · pp. 18–24 Read article
-
Evaluation of Diesel Engine Performance Using Neem Oil Methyl Esters and Biogas as an Alternative Source
Abstract: AbstractThe Neem oil methyl ester (NOME) used as a biofuel is produced by transestetrification process with an aim to reduce the viscosity level, fuel economy and less environmental pollution. Further, addition of biogas to the NOME is expected to improve the performance. The objective of study was to evaluate the performance parameters such as Total fuel consumption (TFC), Specific fuel consumption (SFC) and Brake thermal efficiency (BTE). The experiment was …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 8, Issue 1, 2018 · pp. 21–25 Read article
-
Effect of Layering of Reinforcement on Bearing Capacity of Shallow Footing Resting on Sand
Abstract: The study was done to investigate the performance of reinforced soil foundation. The construction of reinforced soil foundation has a cost effective alternative to conventional methods. Performance characteristics were improved by using one or more layers of non-woven geotextile placed beneath the footing to create a composite material. The reinforcement in the soil interacts with the soil and is resisted by friction, adhesion or passive / bearing capacity. To study …
Published in Journal of Geotechnical Engineering · Vol. 5, Issue 2, 2018 · pp. 15–19 Read article