Search
346 articles for “tensile properties”
-
Basalt Fiber, Palm Fiber, and Seashell Powder Reinforced Hybrid Epoxy Composites: A Mechanical Characterization
Abstract: This study investigates epoxy-based composites reinforced with basalt fiber, palm fiber, and seashell powder fabricated via hand lay-up. Mechanical characterization included tensile, flexural, hardness, and impact testing, supported by ANOVA and TOPSIS analyses. The Basalt-Epoxy composite has the highest mechanical strength among the systems under investigation, with a tensile strength of 275 N/mm² and a yield stress of around 215 N/mm². Compared to Palm-Epoxy composite, which has the lowest mechanical …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1565–1575 Read article
-
Plant-Derived Fiber-Reinforced Polymer Composites: The Impact of Compatibilizer on the Fundamental Characteristics and Degradation Properties
Abstract: By using compression molding, unidirectional polypropylene (PP) composites reinforced with banana fiber were created both with and without the use of stearic acid (SA) as a coupling agent. Four filler loading levels (10%, 20%, 30%, and 40% by weight) were employed during the composite manufacturing process, using raw banana fiber. The resulting composites underwent mechanical testing (tensile, bending, and impact characteristics). The ideal combination of mechanical properties was found in …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 1, 2025 · pp. 27–37 Read article
-
Experimental Study on the Strength Enhancement of Carbon Fiber Reinforced GGBS Concrete
Abstract: This study provides an in-depth analysis of the experimental investigation conducted on carbon fiber reinforced GGBS concrete (CFRGC). The primary objective of the research was to evaluate the effects of carbon fibers on various mechanical properties of concrete, with a particular focus on strength parameters. In this study, the carbon fiber content was systematically varied from 0.5% to 1.5% by weight of cement, in increments of 0.5%, to determine the …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 36–50 Read article
-
Mechanical Performance Degradation of Naturally Aged Nitrile Butadiene Rubber in Low Frequency Range...
Abstract: For good mechanical design, damping is often still an invisible requirement. Nitrile Butadiene Rubber (NBR) has a wide range of applications as a damping and sealing material. To offer the long-term service of NBR, it is important to estimate the degradation of modal properties under complex mechanical and environmental loading. The present work aims to correlate the experimental data with generalized higher-order Maxwell models and curve fitting techniques to find …
Published in Journal of Polymer & Composites Read article
-
Investigation on Mechanical Properties of Geo Polymer Concrete With Fly Ash and Steel Fibers
Abstract: The goal of this project was to manufacture fly ash-based geopolymer concrete (FAC), a more environmentally friendly substitute for conventional Portland cement concrete (OPC) by using fly ash (FA) in place of cement. The study discovered that the properties of FAC were comparable to those of OPC, and that the concrete's performance was greatly impacted by the geopolymer's polymeric nature. The geopolymerization process was started with an alkaline solution, and …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 250–260 Read article
-
Improving the Performance of Self-compacting Concrete Using Optimized Admixture Combinations
Abstract: This study explores the influence of various admixture combinations on the performance of Self-Compacting Concrete (SCC), with an emphasis on its flow behavior, compressive strength, tensile strength, flexural strength, and resistance to impact. Various admixtures, including Air-Entraining Agent (AEA), Water-Reducing Plasticizer (WPC), Retarder (RET), and Accelerator (ACC), were incorporated into the SCC reference mix (SP + VMA) to evaluate their impact on SCC performance. A series of tests—such as slump …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 81–89 Read article
-
Mechanical Characterization of Kevlar 49 and Pina Fiber Hybrid Composites
Abstract: The pursuit of sustainable yet high-performance materials has accelerated research into hybrid composites that combine synthetic and natural fibers. This study investigates the fabrication and characterization of a Kevlar 49/Pina fiber hybrid composite using epoxy resin as the matrix. Kevlar 49, known for its exceptional tensile strength and energy absorption, was employed as the face sheet material, while Pina fiber, a biodegradable reinforcement extracted from pineapple leaves, was incorporated as …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 301–316 Read article
-
Properties of Biodegradable Films based on Pectin, Mango Kernel Flour and Unrefined Palm Oil
Abstract: This study allowed to develop biodegradable films based on pectin, incorporating mango kernel flour and unrefined palm oil, whose physical and mechanical properties were investigated. Results highlighted the feasibility of developing of these composite films. The film properties showed variability in color, physical, barrier and mechanical properties, depending to concentration of ingredients. Biodegradable films obtained are homogeneous, non-cracked, uniform, and color is mainly orange. Opacity of films increased with the …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 52–62 Read article
-
Optimization of Process Parameters for Cu90Ni10 Alloy Processed by Wire Arc Additive Manufacturing (WAAM) Using an L9 Orthogonal Array
Abstract: Abstract Wire Arc Additive Manufacturing (WAAM) has gained significant attention in recent years as a promising technique for producing complex metallic components. This study focuses on the processing of Cu90Ni10 alloy using WAAM and employs an L9 orthogonal array to optimize the mechanical properties of the resulting components. Cu90Ni10 alloy is known for its excellent corrosion resistance and electrical conductivity, making it a critical material in various industries, including aerospace …
Published in Journal of Polymer & Composites · Vol. 11, Issue 8, 2023 · pp. 292–301 Read article
-
An Experimental Investigation of Polyethylene Terephthalate Fibers in the Properties of Concrete
Abstract: In India near about every year 45 million tons of solid waste is generated. The solid waste rate is increasing of 1.5 to 2% every year. In that total solid waste, Plastics contains 12.3% waste generated in which most common are the water bottles. Now the present worldwide situation, the production of PET (Polyethylene Terephthalate) exceeds 6.9 million tons per year. So that it is necessary to reusing of PET …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1063–1072 Read article
-
Characterization of Mechanical and Viscoelastic Properties of Ceramic Nanoparticle-Reinforced Polymer Composites
Abstract: This study examines the mechanical and viscoelastic properties of polymer composites reinforced with ceramic nanoparticles, specifically focusing on enhancing the performance of the material through the incorporation of alumina nanoparticles. The composites were produced by embedding alumina nanoparticles into an epoxy matrix, and their properties were assessed using tensile, flexural, and dynamic mechanical analyses (DMA). The tensile tests showed a remarkable 40% increase in tensile strength and a 35% enhancement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 71–82 Read article
-
Mechanical Characteristics of Naturally Woven Coconut Sheath/Short Sisal Fiber Reinforced Polymer Hybrid Composites
Abstract: This study presents the outcomes of an experimental investigation focusing on the tensile, flexural, impact and water absorption properties of unsaturated polyester resin reinforced with naturally woven coconut sheath and short sisal fibers. Sisal fiber, characterized by its abundance, affordability, degradability, and robust strength, serves as a compelling reinforcement. The naturally woven coconut sheath fibers, discreetly found in the hidden sections of coconut branches, offer an inexpensive, biodegradable option with …
Published in Journal of Polymer & Composites · Vol. 12, Issue 1, 2024 · pp. 34–44 Read article
-
Mechanical Properties Investigation of Green Waste Composite Material
Abstract: Widespread accessibility and abundance of natural fibres are driving forces behind renewed focus on eco-friendly solutions. Researchers have recently begun to focus on natural fibres as reinforcement due to their many advantages over more conventional materials. Natural fibre is an attractive ecological and biodegradable alternative to most common glass fibre, synthetic reinforcement, because of its high specific and low cost mechanical capabilities. India is home to a wealth of untapped …
Published in Journal of Polymer & Composites · Vol. 11, Issue 4, 2023 · pp. 28–36 Read article
-
Effect of Graphite and Titanium Dioxide on Mechanical Properties and Wear Behavior of Al based HMMCs
Abstract: Aluminium Metal Matrix Composites (MMC) is beneficial in a diversity of applications of engineering, particularly due to their strength while being lightweight. The intention of this paper is to develop a Hybrid Metal Matrix Composite (HMMC) using base metal aluminium alloy which is reinforced with different wt% of Graphite and Titanium Dioxide and then study the different mechanical properties like microstructure analysis, tensile strength, hardness, and wear behavior of HMMC …
Published in Journal of Polymer & Composites · Vol. 11, Issue 13, 2023 · pp. 20–30 Read article
-
Synergistic Procurement and Molecular Characteristics of Full Grain Leather in Advanced Material Engineering
Abstract: This article explores the molecular characteristics and engineering processes involved in the production and application of full-grain leather, recognized for its premium quality due to its intact granular structure. Full-grain leather, undivided into split layers, maintains a robust and durable molecular composition, making it a preferred material in high-quality garment manufacturing. The study emphasizes the role of leather conditioners in restoring the molecular suppleness and moisture retention of leather, crucial …
Published in International Journal of Advance in Molecular Engineering · Vol. 2, Issue 2, 2024 · pp. 8–13 Read article
-
Polymer Matrix-Based High-Performance Thermoplastic Composites for Automotive Applications: Design, Characterization, and Interface Behavior
Abstract: The study emphasizes the role of high-performance thermoplastic polymer matrices such as PEEK, PPS, and PA6, selected for their superior thermal stability, mechanical strength, and recyclability in automotive environments. The expanded usage of electric vehicles (EVs) and self-driving transportation creates a demand for advanced materials which are weight-conscious yet high in strength relative to their weight, impact-resistant yet still being environmentally friendly. This study aims to create and define fiber-reinforced …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 216–237 Read article
-
Exploring the Mechanical Characterization and Microstructural Properties of the Varying Weight % of Nano Boron Carbide (nB4C) Reinforced Al2024 composites using the Vacuum-Assisted Stir Casting Method
Abstract: In this investigation the stir casting technique is utilized to fabricate Al2024-B4C nano composites. The nanoB4C particles used in the reinforcement material have a particle size of 50 nm and variable weight percentages. In Al2024 composites, boron carbide reinforcement is included at weight percentages ranging from 0% to 3%, with a 1% interval between each percentage addition. Following the casting process, the samples were prepared for microstructural and mechanical evaluation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 394–404 Read article
-
A Review on Properties of Natural Fiber Reinforced Composite Materials for Automotive Application
Abstract: The use of composite polymer matrix materials is growing rapidly in automotive, marine and aerospace applications due to their light weight and recyclable properties. In the automotive industry, the use of polymer matrix for interior panels, trims, exterior panels and fender assemblies is rapidly increasing in the 21st century. It also stimulates the use of polymer compounds reinforced by natural fibers. Natural fiber polymer composites are a growing industry due …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 915–922 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Exploring The Performance Dynamics of Basalt Fibre Reinforced Polymers: Mechanical and Viscoelastic Insights
Abstract: Basalt fibre reinforced polymer (BFRP) composites are gaining significant attention as sustainable alternatives to traditional reinforcement materials due to their superior mechanical performance, thermal stability, and eco-friendliness. This study examines the tensile, flexural, impact, and viscoelastic properties of BFRP composites fabricated via vacuum-assisted resin transfer molding (VARTM) using varying fibre volume fractions (20%, 30%, and 40%) and fibre orientations (unidirectional and bidirectional). The results reveal that composites with 40% fibre …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 12–22 Read article