Search
1957 articles for “properly” (ranking capped at the first 2,000 matches — narrow the search to see the rest)
-
Effect of Nanoclay Loading on Physical and Mechanical Properties of Epoxy Composites
Abstract: The effects of multilayer silicate loading on hardness, tensile, and impact properties were examined by developing epoxy–nanoclay composites with 0–5 wt% nanoclay. A desirable compromise between reduced void content and higher Shore D hardness was reached with an ideal nanoclay loading of 3 wt%, which reflected improved load transfer and increased matrix stiffness as a result of limited polymer chain mobility. Tensile strength and modulus rose up to 3 wt% …
Published in International Journal of Advance in Molecular Engineering · Vol. 4, Issue 1, 2026 · pp. 36–45 Read article
-
The Effect of Welding Parameter and Tool Geometry on Mechanical Properties of RZ5-10wt%TiC FSW Joint
Abstract: Friction Stir Welding (FSW) of metal matrix composite (MMC) provides the grain refinement and reinforcement redistribution of the composite used for wide application in aerospace and structural. This wide application needs development of best-suited joining process for MMC which is complicated to unite by the traditional welding process. The paper observed the consequence of the welding parameter and tools’ geometry on the mechanical properties of the friction stir butt welded …
Published in Journal of Polymer & Composites · Vol. 14, Issue 4, 2026 Read article
-
Comparative Investigation on Mechanical Properties of AMCs Fabricated through Liquid and Solid-State Fabrication Process
Abstract: This current research work is primarily focused on comparative experimental study on effect of two distinct fabrication process routes i.e. liquid state and solid state process and their corresponding parameters on microstructure and micro-hardness properties of Aluminium matrix composites (AMCs). In this work, AMCs were fabricated by reinforcing Al2O3 powder materials of 5, 10 and 15 wt.% into pure Aluminum (Al) matrix phase through two distinct processes; liquid state (stir …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 202–215 Read article
-
Substantial Enrichment of Mechanical, Thermal and Electrical Properties of Thermoplastic Polyester Elastomer by Melt Blending with Nano-ZnO
Abstract: Polymers are more reinforced with nano metal oxides, a completely flexible composite of engineering that simplifies the way of exhibiting good mechanical and chemical features. Polymer mixtures represent a very vital field in the handling of innovative ingredients, which have better features than net polymers. Polymer mixtures are able to deliver ingredients with prolonged useful features beyond the range that can be achieved from a single polymer equivalent. A methodical …
Published in Emerging Trends in Chemical Engineering Read article
-
A Review of the Properties of Electro Less Duplex Coatings with Different Outer Layers and Bath Preparations
Abstract: Electroless coatings are widely used now because of their outstanding tribological as well as physical qualities. The need for a coating or finished product with any of these attributes has increased over the past few years. As a consequence, there has been a rise in the amount of study and associated publishing production on the creation of various surface types and coverings with various components. This study gave rise to …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 1, 2023 · pp. 6–11 Read article
-
Geopolymer Concrete Composites and its Properties- A Clean and Sustainable Development
Abstract: Production of geopolymer composites, an inventive and environmentally friendly substitute for regular Portland cement concrete, involves the polymerization of several industrial waste materials, including fly ash, powdered granulated blast furnace slag, silica fume, and rice husk ash, using solutions that are very alkaline. Because this technique removes the requirement for calcination, which is a significant contributor of CO2 emissions during the manufacturing of OPC, GPC is more ecologically friendly. Alkaline …
Published in Journal of Polymer & Composites · Vol. 12, Issue 3, 2024 · pp. 284–300 Read article
-
Advanced Processing Technologies and Material Properties of Ceramic-Matrix Composites for Structural and Industrial Applications
Abstract: Ceramic-matrix composites (CMCs) are becoming more popular as building and industrial materials because they have a unique set of qualities, such as being able to withstand high temperatures and being light and strong. This brief talks about the newest improvements in processing methods and material features that have put CMCs at the top of the list of industrial materials. Using advanced processing methods like chemical vapor infiltration (CVI), polymer infiltration …
Published in Journal of Polymer & Composites · Vol. 12, Issue 6, 2024 · pp. 138–151 Read article
-
The Poisson–Uma Distribution with Properties and Applications to Model Thunderstorm Events
Abstract: The discrete data available in any field of knowledge is influenced by several known and unknown factors and the factors which affect the discrete data are stochastic. The stochastic nature of discrete data is a challenge for statisticians to model and analyze with the existing discrete distributions. In the present paper, Poisson-Uma distribution, the Poisson compound of Uma distribution, has been proposed to model over-dispersed data of thunderstorm events. The …
Published in Research & Reviews : Journal of Statistics · Vol. 13, Issue 1, 2024 · pp. 20–30 Read article
-
Influence of Tib2 Wt. % on the Microstructural and Mechanical Properties of In-Situ Processed Stir-Cast Metal Matrix Composite of Al-6061
Abstract: Currently, there is an increasing trend in the automotive and aerospace industries towards the adoption of lighter and stronger materials to reduce weight and enhance fuel efficiency. Metal matrix composites must be developed in order to increase the overall performance of automobiles and aircraft as a result of this transition. Among the various composite materials employed, Aluminium Matrix Composites (AMCs) are frequently utilised to meet stringent industrial requirements. The purpose …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 655–661 Read article
-
Investigation of Dielectric Properties of Lead-Free BaTiO3 Ceramic at Different Sintering Temperatures
Abstract: In the present study, Barium titanate (BaTiO3) was produced using the conventional solid-state sintering technique at three distinct sintering temperatures: 1000, 1100, and 1200°C. It was confirmed by the X-ray diffraction pattern that the perovskite phase was formed without secondary peaks and that the presence of the tetragonal phase was observed near room temperature. Upon conducting a frequency- dependent dielectric study, it was found that ceramic sintered at 1100°C exhibited …
Published in Recent Trends in Fluid Mechanics · Vol. 12, Issue 1, 2025 · pp. 23–30 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Comparative Analysis of Antioxidant and Antimicrobial Properties of Tasar Sericin from Different Ecological Regions of India
Abstract: Sericin is a by-product of the silk industry, has gained attention for its bioactive properties, and ability to scavenge free radicals for protecting cells from oxidative damage, and different climatic conditions may influence the biochemical properties of the sericin. Thus, the present study aims to evaluate the antioxidant and antimicrobial properties of tasar sericin extracted from silkworms reared in diverse ecological regions of India. South Bihar, Jharkhand, Chhattisgarh, and Odisha …
Published in Research and Reviews : A Journal of Life Sciences · Vol. 15, Issue 1, 2025 · pp. 70–76 Read article
-
A Brief Review on Perovskite Materials: Synthesis, Properties, and Applications
Abstract: Perovskite materials have emerged as a transformative class of compounds, capturing widespread interest due to their remarkable properties and diverse applications across various fields, including optoelectronics, catalysis, energy storage, and environmental technologies. The synthesis techniques, classification, and unique properties of perovskite materials are thoroughly examined in this paper, which highlights the materials' potential to completely transform a number of sectors. One of the standout features of perovskites is their highly …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 42–49 Read article
-
Green Synthesis and Evaluation of Electronic and Optical Properties of CdS/CdTe Quantum Dots
Abstract: The CdS/CdTe quantum dots (QDs), with altered concentrations of CdS, were synthesized using straightforward precursors through an environmentally friendly green method. The synthesized quantum dots were characterization by UV–visible absorption spectroscopy, Photoluminescence (PL), and Fourier Transform Infrared Spectroscopy (FTIR) to understand their electronic and structural properties. The average particle size is nearly consistent with the values derived from Brus's formula. The UV–visible spectra show a blueshift compared with pure sample, …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 185–194 Read article
-
Utilizing Machine Learning to Evaluate the Connection between Poisson's Ratio and the Petrophysical Properties of Reservoir Rocks
Abstract: The Poisson's ratio is a crucial cornerstone, illuminating our understanding of geomechanical behaviour in wells during the dynamic drilling process and the inspiring recovery journey. This research rigorously employs machine learning methods to analyse the significant impact of geophysical parameters on the Poisson ratio in hydrocarbon reservoirs found in oil fields. The analysis utilized data from multiple oil and gas fields, highlighting the crucial relationships between the Poisson ratio, the …
Published in Journal of Petroleum Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 33–43 Read article
-
Investigating The Mechanical Properties of Sisal/Areca/Sisal Natural Fiber Reinforced Composite Material Treated with NaOH and Filled with Al2O3 and Tio2
Abstract: Biopolymer-based composites which are obtained from the natural resources like plants, animal or mineral based have recently attracted significant interest because they can be used in interesting ways in biology and materials science. These materials are generally non-toxic, reusable, and recyclable, which are useful in many situations where sustainability and environmental protection are important. Plant Based fibers like Bamboo, Coir, Kenaf, Banana, Sisal, hemp and jute are proving their potentiality …
Published in Journal of Polymer & Composites · Vol. 13, Issue 3, 2025 · pp. 413–425 Read article
-
Comparative Analysis of 3D Printed Nylon and PETG Specimens for Mechanical Properties.
Abstract: Fused deposition modeling (FDM) is one of the most used additive manufacturing techniques for polymer components. The polymer materials generally used in FDM process are polylactic acid (PLA), acrylonitrile butadiene styrene (ABS), polyethylene terephthalate glycol (PETG), Nylon, etc. The mechanical properties of parts fabricated by FDM depend on material and process parameters. Several researchers have tried to investigate the influence of process parameters on mechanical properties for some of the …
Published in Journal of Materials & Metallurgical Engineering · Vol. 15, Issue 3, 2025 · pp. 7–14 Read article
-
Effect of Solution Heat Treatment and Aging on the tensile Properties of Ti-6Al-4V Alloy Component Manufactured by Wire Arc Additive Manufacturing
Abstract: Wire Arc Additive Manufacturing (WAAM) is a cost-effective technique for fabricating components from the Ti-6Al-4V alloy, known for its high strength and utility in demanding applications. To maximize its strength, the alloy undergoes Solution Treating and Aging heat treatment, comprising three key steps: (i) Solution Treating: The alloy is heated to 950°C (just below the β transus) and held for 1 hour, increasing the β phase proportion. This step sets …
Published in International Journal of Machine Systems and Manufacturing Technology · Vol. 3, Issue 2, 2025 · pp. 1–6 Read article
-
Thermo-Mechanical and Electrical Properties of Multi-Walled Carbon Nanotube-Enhanced Polyimide Composites for Aerospace Thermal Protection Systems
Abstract: Advanced aerospace thermal protection systems (TPS) require multifunctional materials that simultaneously provide high thermal stability, mechanical strength, and reliable electrical performance. Polyimide (PI) is widely used in aerospace structures due to its lightweight design and exceptional thermal durability, yet its low thermal conductivity and insulating behavior limit its effectiveness in heat dissipation and electromagnetic interference (EMI) shielding applications. This study addresses these limitations by developing multi-walled carbon nanotube (MWCNT)-reinforced polyimide …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 966–982 Read article
-
Influence of the Modification of Resol Phenolics on the Properties of Glass and Cotton Fiber Laminates
Abstract: Fiber reinforced polymer (FRP) composite based on resol phenolics awaits special attention due to excellent inherent properties of the resol phenolics. In this study, modified resol phenolics by unsaturated polyester (UP) and epoxidised novolacs of simple phenol, o-cresol and p-cresol were used to fabricate glass and cotton FRPs. An overall enhancement of 25% in tensile strength and 40% in impact strength is achieved upon modification for both the modified laminates. …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 239–255 Read article