Search
99 articles for “operating voltage”
-
Review and Implementation of Superconducting Technology in Power System for Reduction of Transmission and Distribution Line Losses
Abstract: Superconducting technology has wide applications in superconducting generator, superconducting transmission lines and superconducting energy storage systems. Most of the studies undertaken conclude that although the application of superconducting material in power system did indeed lead to improved efficiencies, the capital cost and cooling energy requirement were too large and that it was not economically feasible to implement. But the major result in the following studies is that in the future, …
Published in Journal of Semiconductor Devices and Circuits · Vol. 12, Issue 1, 2025 · pp. 26–36 Read article
-
Active Power Control during Contingency using UPFC
Abstract: The ability of FACTs devices to control phase angle, bus voltages and line impedance in transmission line is what make it capable of controlling power flow. In this paper, we have studied one of most effective FACTS device known as UPFC. Analysis under the contingency is done using 10 bus system and contingency condition is being introduced in three-phase, delta-delta connected transformer i.e. one base is damaged or accidently opened. …
Published in Journal of Power Electronics and Power Systems Read article
-
Performance Analysis of Dual Junction Solar Cell Devices utilizing Subcells of In0.51Ga0.49P and GaAs to Study Key Solar Cell Parameters via TCAD based Simulation
Abstract: In the present work, a multi-junction solar cell was designed to obtain better performance over single-junction solar cells. The proposed structure is composed of different layers of diverse semiconductor materials stacked on each other. Here, an In0.51Ga0.49P/GaAs double-junction solar cell was outlined as having a distinctive composite material (GaAs) as the tunneling junction. To optimize the solar cell's effectiveness, In0.47Ga0.15Al0.37P was used in the window layer and the back-surface field …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 829–837 Read article
-
Cooling test's impact on photovoltaic solar panel systems
Abstract: Temperature changes have a massive effect on the performance of photovoltaic (PV) solar panels that are currently extensively used for the conversion of solar power into electrical energy. The output of solar systems is limited, especially in hot climates, as heating of the panel causes output voltage and efficiency to drop. The paper explores the effects of cooling on the quality and performance of photovoltaic (PV) solar panels. In this …
Published in International Journal of Electronics Automation · Vol. 4, Issue 2, 2026 Read article
-
Electrical Discharge Machining for Precision Metal Working Industries
Abstract: EDM is called as Electrical Discharge Machining. Otherwise called as Spark Erosion Machining, Electro-Erosion Machining, Spark Machining, and Electro Discharge Machining. It is an unconventional machining process to machine hard metals and alloys. EDM has been a significant machining technique. The electrode, work piece materials, dielectric, and the range of pulse rate, current, and voltage make up the basic EDM process. The dielectric serves the following purposes: it transports removal …
Published in International Journal of Electro-Mechanics and Material Behaviour · Vol. 1, Issue 2, 2023 · pp. 7–11 Read article
-
A Novel Approach for Design and Optimization of Slot Antenna for WLAN Applications
Abstract: The simulation, and analysis of a micro-strip fed slot antenna array intended for operation in the 2.4 GHz ISM (Industrial, Scientific, and Medical) band, which is widely used for wireless technologies such as Wi-Fi and Bluetooth. A slot antenna is a type of antenna where a slot (cut or gap) is made on a metal surface, and it radiates electromagnetic waves. Utilizing ANSOFT HFSS software, the antenna's performance is optimized, …
Published in Journal of Microwave Engineering and Technologies · Vol. 12, Issue 1, 2025 · pp. 1–12 Read article
-
Development of a Polymer-Encapsulated IoT-Based Sensor for Thermal and Electrical Protection of EV Batteries
Abstract: Electric Vehicles (EVs) mark a critical shift toward sustainable transportation, with Battery Management Systems (BMS) playing a vital role in ensuring battery safety, reliability, and efficiency. The proposed BMS in this project incorporates real-time charge monitoring, temperature sensing, and fire detection capabilities to address safety concerns associated with lithium-ion batteries. Key features include current and voltage tracking, State of Charge (SoC) estimation, fault detection, and a user-friendly LCD interface. By …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 582–591 Read article
-
Flying Drone Using KK Flight Controller
Abstract: This paper presents the design, development, and testing of a quadcopter drone using the KK2.1.5 flight controller, with an emphasis on stability and educational value. The KK2.1.5 controller features are inbuilt LCD screen, inbuilt programming, enabling direct configuration and tuning without the need for a computer interface, which makes it highly suitable for beginners and students. The drone is built using a modular frame architecture, which allows for easy replacement …
Published in International Journal of Advanced Control and System Engineering · Vol. 3, Issue 2, 2025 · pp. 20–25 Read article
-
Energy Management System with Home Automation
Abstract: The surge in population and industrial activity is leading to higher energy consumption rates daily, yet there's a shortage of expertise in monitoring and managing this usage. Traditional energy meters used in homes are offline and necessitate manual readings, which can be addressed through the adoption of smart energy meters. Proposed as an IoT-based solution, these meters enable users to access readings globally, providing detailed information on voltage, current, power, …
Published in Journal of Energy, Environment & Carbon Credits · Vol. 14, Issue 1, 2024 · pp. 1–10 Read article
-
Solar Tracking System and Battery Management
Abstract: This project focuses on optimizing renewable energy systems by combining a dual-axis solar tracking mechanism with a smart Battery Management System (BMS) to improve solar energy harvesting and storage. The system uses an Arduino Uno microcontroller and Light Dependent Resistors (LDRs) to track the sun's position, enabling the solar panel to adjust its orientation in real-time for optimal sunlight exposure throughout the day. At the same time, the integrated IoT-based …
Published in Journal of Alternate Energy Sources & Technologies · Vol. 17, Issue 2, 2026 Read article
-
Voltage Vigilance: Ensuring Balance and curbing Theft in Power Distribution Networks
Abstract: This project proposes a system for detecting electrical overload and earth faults using an Arduino Uno controller. The system uses a current sensor to identify overloads and a voltage sensor to detect earth faults. An ESP8266 module allows users to switch between the two fault detection modes. When an overload is detected, the Arduino turns off AC bulbs using a relay and sends an alert message via a GSM module. …
Published in International Journal of Advanced Control and System Engineering · Vol. 3, Issue 1, 2025 · pp. 15–21 Read article
-
Distributed Load Shedding in Energy Distribution System with IoT
Abstract: This project is designed to develop a modern power distribution and control system which is a very thoughtful one in reducing unwanted power usage in modern times. It is a microcontroller operated system where we fix a maximum power limit for each consumer. Night time is considered to be the peak time for energy consumption, to be precise from 6pm to 11 pm. Here we program the microcontroller to cut …
Published in Trends in Electrical Engineering · Vol. 14, Issue 2, 2024 · pp. 1–9 Read article
-
Alcohol Detection for Automobiles
Abstract: The Alcohol Detection Device Project aims to create an alcohol detection device that can accurately measure the alcohol concentration in a driver’s blood while operating a vehicle. Alcohol-impaired driving poses a significant threat to road safety worldwide. The device aims to enhance road safety, reduce accidents, and save lives. Public Health Impact by promoting responsible driving habits, the device contributes to public health by minimizing the negative consequences of alcohol-related …
Published in Journal of Automobile Engineering and Applications · Vol. 11, Issue 1, 2024 · pp. 18–25 Read article
-
IoT-Based Power Monitoring System
Abstract: Today, in many smart systems, IOT plays an important role. It is mostly used in power monitoring, Household applications, and also in industrial applications. In that, power is the most important thing that is to be monitored, controlled and properly utilized. In this paper, a system is designed for monitor and control the street lights of particular area. With the help of LDR, power consumption is possible. Customers and system …
Published in Journal of Power Electronics and Power Systems · Vol. 16, Issue 1, 2026 · pp. 16–24 Read article
-
An Optimization Technique to Resolve Real time Monitoring using IoT for Smart Energy Meter
Abstract: This paper presents an IoT-based smart energy meter designed for accurate, real-time monitoring of household and industrial electrical consumption. Customers and system operators can view real-time patterns of energy consumption with an easy-to-use web-based dashboard. Users can obtain important insights into their electricity consumption through graphical representations and historical data analysis, allowing for more efficient load management, energy conservation, and cost optimization. Users can obtain energy data from any location …
Published in Journal of Power Electronics and Power Systems · Vol. 16, Issue 1, 2026 · pp. 33–40 Read article
-
Integration of Taguchi and MCDM Techniques for the Optimization of Experimental Parameters in Electrical Discharge Machining: A Research
Abstract: Electric discharge machining (EDM) represents a non-conventional approach to machining, particularly beneficial for processing hard-to-machine materials or components with high length-to-diameter ratios or intricate shapes. Widely employed across various industries such as automotive, chemical, aerospace, biomedical, and tool and die, EDM offers a unique method for achieving precise shapes and dimensions. Unlike traditional machining methods where form is attained through the interaction of the tool and workpiece, EDM operates without …
Published in Trends in Mechanical Engineering & Technology · Vol. 14, Issue 1, 2024 · pp. 6–14 Read article
-
Design and Simulation of Low-power, High-speed Effective Area Mux Based One-bit Full Adder Using CMOS Technology
Abstract: Our findings reveal a novel kind of circuit capable of performing both XOR and XNOR operations in parallel. Power dissipation and delay are both greatly reduced in the proposed circuits due to their low output capacitance as well as minimal short-circuit power dissipation. We show six new hybrid 1-bit full-adder (FA) circuits that take use of the XOR-XNOR or XOR/XNOR gates' special full-swing function. Each potential circuit layout has both …
Published in International Journal of VLSI Circuit Design & Technology · Vol. 1, Issue 1, 2023 · pp. 25–33 Read article
-
Catalytic Performance Improvement in Polymer Derived Nanostructures for Fuel Cell Applications
Abstract: The performance and operational lifetime of PEMFCs are closely linked to the catalytic activity and durability of cathode electrocatalysts. In this research, a polymer-derived cobalt–iron nitrogen-doped carbon (CoFe–N/C) nanostructured catalyst is developed to enhance the ORR performance for PEMFC applications. PAN and melamine serve as nitrogen-rich polymer precursors, while cobalt and iron salts generate highly dispersed metal–nitrogen active sites within a porous carbon matrix through thermal treatment at 900 °C. …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 968–979 Read article
-
AI-Driven Predictive Maintenance Framework for Intelligent Vehicle Health Monitoring
Abstract: The accelerated development of smart and connected car systems made the necessity to find the accurate and real-time predictive maintenance solutions which would minimize the number of unexpected failures as well as increase the cars on-road safety. The current paper proposes an artificial intelligence-based hybrid predictive maintenance system that combines Long Short-Memory (LSTM) networks and the XGBoost predictor to provide a potent vehicle fault diagnosis, Remaining Useful Life (RUL) prediction, …
Published in Trends in Machine design · Vol. 13, Issue 1, 2026 · pp. 1–17 Read article