Search
241 articles for “degradation mechanisms”
-
Perspectives of 3D-Printed Polylactic Acid-Based Composites Reinforced with Natural Fibers
Abstract: The growing demand for sustainable and biodegradable materials has led to the development of polylactic acid (PLA)-based composites reinforced with natural fibers. This study investigates the mechanical, thermal, printability, and environmental performance of 3D-printed PLA/Natural Fiber composites, addressing key challenges in fiber-matrix compatibility, structural integrity, and biodegradability. Natural fiber reinforcement enhanced Young’s modulus and flexural strength, but excessive fiber content led to agglomeration, reduced tensile strength, and increased brittleness. Thermal …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 649–664 Read article
-
Next-Generation Catalysts: Enhancing Efficiency and Selectivity in Chemical Reactions
Abstract: This study investigates the fundamental principles of coatings and their rejuvenation mechanisms, focusing on the development of advanced coatings that not only protect but also restore the performance of degraded surfaces. The article delves into the various types of coatings, including organic, inorganic, and hybrid formulations, emphasizing their distinct characteristics and applications. A significant portion of the study is dedicated to the mechanisms of rejuvenation, where we analyze how specific …
Published in Journal of Catalyst & Catalysis · Vol. 11, Issue 3, 2024 · pp. 24–28 Read article
-
Simultaneous Improvement of Mechanical Properties and Thermal Stability of Polyvinyl Chloride Nanocomposite by Magnesium Aluminum-Layered Double Hydroxide
Abstract: The application of nanoclays in polyvinyl chloride (PVC) is limited as the organic modifier of conventional nanoclays can degrade PVC. Using usual nanoclays could reduce thermal stability due to the catalytic effects on PVC degradation, so the main chalenge is to find suitable nanoclay for PVC. The effects of two nanoclays, MgAl-layered double hydroxide and alkylammonium-modified montmorillonite, were studied on the mechanical properties of PVC nanocomposites. Dioctyl phthalate (DOP)-plasticized PVC …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 825–837 Read article
-
Improving the Mechanical and Interfacial Properties of Bhendi Fiber via Chemical Surface Treatments
Abstract: Because of its primary benefits—moderate strength and stiffness, low cost, and being a renewable, degradable, and ecologically friendly material—natural fibers are believed to have potential use as reinforcing agents in polymer composite materials. Due to their inherent hydrophilicity, they have a tendency to retain moisture, which can impair or soften the fibers' adhesion to the surrounding matrix. This can have an impact on the performance of composite materials used in …
Published in International Journal of Advance in Molecular Engineering · Vol. 3, Issue 1, 2025 · pp. 22–32 Read article
-
Photonic Polymer Composites for Light-Modulating Displays and High-Throughput Optical Data Transmission
Abstract: The combination of PMMA-based composites recently received substantial attention from the photonic applications field since these materials combine excellent optical transparency, mechanical flexibility and straightforward fabrication capabilities. The material performance of pure PMMA requires functional additives because it shows limited thermal properties and optical attenuation in addition to sensitivity against UV rays. The research explores developmental pathways for PMMA composites through combined use of nanoparticles and electro-optic polymers with dopants …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 838–860 Read article
-
Marine Algal Microfiber and Agro-Waste Reinforced Crosslinked Polymer Composites for Sustainable Coastal Materials
Abstract: Crosslinked bio-polymer composites reinforced with marine algal microfibers and agro-waste fillers were fabricated and systematically characterized for sustainable coastal applications. Mechanical testing revealed that tensile strength increased from 18.5 MPa for neat polymer to 25.1 MPa at 20 wt.% reinforcement (~35% improvement), while the flexural modulus improved from 0.72 GPa to 1.02 GPa (~42% increase). Impact strength, however, decreased from 3.8 kJ/m² for neat polymer to 2.9 kJ/m² at 30 …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 210–223 Read article
-
Predictive Modeling of Polymer Composites for Medical Implants Using Artificial Intelligence Techniques
Abstract: The use of polymers in biomaterials was now key to designing the next generation of medical implants, which need to be strong and also compatible with living tissue. Tests for biocompatibility, such as those done in the laboratory and by doing experiments on animals, require much time and many resources, so the need for computer-based approaches becomes clear. An artificial intelligence approach was provided in this study to determine how …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 665–692 Read article
-
Advancements in Polymer Chemistry for Biomedical Applications: A Focus on Injection Guides
Abstract: Polymers have revolutionized biomedical applications, offering versatility, biocompatibility, and cost-effective manufacturing. This paper explores the role of polymer chemistry in the development of an advanced injection guide for precise drug delivery, aiming to enhance both safety and efficiency in clinical settings. Emphasis is placed on polymer selection, structural design, and functional modifications to improve injection procedures. By leveraging biodegradable and biocompatible polymers, the guide minimizes adverse tissue reactions while ensuring …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 129–136 Read article
-
Hybrid Polymer Nanocomposites with Enhanced Dielectric and Optical Properties for Wireless Communication Systems
Abstract: The incorporation of nanofillers into polymer matrices offers a promising approach to enhancing the multifunctional properties of composite materials. This study examines the effect of nanofiller concentration on the dielectric performance, mechanical strength, thermal stability, optical absorbance, and electromagnetic interference (EMI) shielding effectiveness of polyvinylidene fluoride (PVDF)-based nanocomposites. Titanium dioxide (TiO₂) and zinc oxide (ZnO) nanofillers were incorporated at varying concentrations to assess their influence on material properties. EMI shielding …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 518–549 Read article
-
Comprehensive Review of Kojic Acid and Its Derivatives: Biological Activities, Safety, and Therapeutic Potential in Depigmentation
Abstract: There are several uses for kojic acid in human medicine, particularly in depigmentation. Additionally, derivatives of it are suggested to enhance efficacy, avoid side effects, and stop chemical degradation. With an eye toward human use and an attempt to clarify the action mechanisms, the goal of this study was to review the most recent scientific literature regarding the biological activities and safety information of kojic acid or its derivatives. During …
Published in Research and Reviews: A Journal of Pharmaceutical Science · Vol. 16, Issue 2, 2025 · pp. 45–53 Read article
-
Polymeric Hybrid Systems Engineered with Multiple-Stage Energy Absorption for Temperature Control
Abstract: Polymer–composite based phase change systems offer an effective strategy for adaptive thermal management; however, most existing systems exhibit single-stage latent heat transitions, limiting their applicability in environments with fluctuating thermal loads. In this study, a thermoplastic polyurethane (TPU) polymer matrix was reinforced with two microencapsulated paraffin-based phase change materials (PCM-A and PCM-B) to achieve multi-level latent heat storage behavior. The fabricated TPU/PCM-A10–B20 polymer–composite demonstrated two distinct endothermic transitions at approximately …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 146–155 Read article
-
The Effect of Temperature on Possible Microorganisms Isolated and Identified in Freshwater and Saltwater Media from Mixed Crude Oil
Abstract: The investigation of the effect of temperature on the characteristics and properties of microorganisms isolated and identified in freshwater and saltwater media mixed with crude oil demonstrates the potential impact of temperature variation under different bioreactor conditions. However, temperature was identified as an inhibitor of microbial growth, resulting in a decrease in the population of individual organisms sampled during the investigation. This trend was observed in both freshwater and saltwater …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 2, 2026 · pp. 36–47 Read article
-
Design and Characterization of High-Performance Polymer Nanocomposites for Aerospace Applications
Abstract: Polymer nanocomposites have revolutionized aerospace materials through mechanical strength, thermal stability, and lightness. A number of polymer matrices filled with nanofillers such as carbon nanotubes, graphene, and nanoclay considerably improved structural integrity, flame resistance, and environmental adaptability. However, fabrication techniques are still being optimized so that nanofillers are properly dispersed throughout, which may create contradictions between mechanical strength and process ability. This work tries to design and characterize high- performance …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 178–193 Read article
-
Assessment of Matrix Cracking and Fiber Breakage in Hybrid Composite Materials.
Abstract: Hybrid composite materials, combining two or more distinct fiber or matrix constituents, have emerged as advanced structural solutions for aerospace, automotive, marine, and civil engineering applications. However, their complex microstructure makes them susceptible to multiple interacting damage mechanisms, particularly matrix cracking and fiber breakage. This study provides a comprehensive assessment of these damage modes, emphasizing their initiation, evolution, and combined effects on the mechanical integrity of hybrid composites. Matrix cracking …
Published in International Journal of Fracture Mechanics and Damage Science · Vol. 3, Issue 2, 2025 · pp. 1–5 Read article
-
Bio-Derived TPS–Lignin Hybrid Composites Reinforced with Modified Coir and Plantain Fibers for Eco-Efficient Structural Applications
Abstract: This study develops bio-derived polymer composites using a thermoplastic starch–lignin (TPS–lignin) matrix reinforced with alkali-treated coir and plantain fibers for sustainable load-bearing applications. The TPS–lignin matrix was formulated using cassava starch, glycerol, and 10 wt% lignin, while coir and plantain fibers were surface-modified using 5 wt% NaOH to enhance interfacial compatibility. Composite laminates were fabricated with varying fiber loadings (10–40 wt%) through melt-mixing and hot-press compression. Tensile, thermal, morphological, and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 136–145 Read article
-
Studies on Mechanical, Electrical and Thermal Properties of Compatibilized PLA/ABS Blends Reinforced with Wood Flour
Abstract: AbstractPoly lactic acid (PLA) bio-polymer (60%) was blended with acrylonitrile butadiene styrene (ABS) (40%) and filled with wood flour (0, 10, 20%) using a twin screw compounding extruder and a suitable compatibilizer i.e., glycerol, is also incorporated into that mixture at a percentage of 4% respectively. Test specimens were prepared by using an injection molding machine for mechanical, electrical and thermal properties as per ASTM standards and the properties were …
Published in Journal of Polymer & Composites · Vol. 3, Issue 3, 2015 · pp. 20–26 Read article
-
Approximation-Aware Computation for Graceful QoS Degradation in Modern Multiprocessor Operating Systems
Abstract: Modern multiprocessor operating systems face unprecedented challenges in maintaining Quality of Service (QoS) guarantees under dynamic workload conditions and resource constraints. Traditional approaches to resource management often result in abrupt service degradation or complete task failure when system resources become scarce. This study presents a comprehensive framework for approximation-aware computation that enables graceful QoS degradation in multiprocessor environments. We explore the integration of approximate computing paradigms with operating system schedulers, …
Published in Journal of Operating Systems Development & Trends · Vol. 12, Issue 3, 2025 · pp. 08–15 Read article
-
IoT-Enabled Polymer–Gel PCM Composites for Intelligent Thermal Management in Solar Facade Applications
Abstract: The present study investigates the development of a multifunctional polymer–gel phase change composite designed for solar façade applications with integrated real-time thermal monitoring capability. A crosslinked polyvinyl alcohol–borax matrix was employed as a three-dimensional polymer scaffold to encapsulate paraffin-based phase change material, ensuring leakage-free operation and structural integrity under repeated thermal cycling. Graphite nanoplatelets were incorporated as thermally conductive nano-fillers to enhance heat transfer through the polymer composite via percolation-driven …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 99–111 Read article
-
Toxic Trails: Land Degradation Induced By Pollutants
Abstract: Land degradation, driven by various pollutants, poses a significant threat to global ecosystems, agriculture, and human well-being. This review article explores the mechanisms through which pollutants, including heavy metals, pesticides, industrial chemicals, and urban waste, contribute to soil erosion, salinization, acidification, and loss of soil biodiversity. The article presents detailed case studies from regions such as China, India, Nigeria, the United States, Europe, Sub-Saharan Africa, and Australia, highlighting the diverse …
Published in International Journal of Land · Vol. 1, Issue 1, 2024 · pp. 37–45 Read article
-
Investigation on Basalt Based High Performance Concrete
Abstract: The study aims to explore the potential of basalt fibers and metakaolin in enhancing the mechanical, durability, and microstructural characteristics of concrete. The investigation begins with a thorough literature review is conducted to ascertain the present status of information regarding metakaolin, basalt fibers, and their impact on concrete. The experimental program involves the formulation of concrete mixtures with varying percentages of basalt fibers and metakaolin, alongside a control mixture without …
Published in Journal of Polymer & Composites · Vol. 11, Issue 10, 2023 · pp. 1–8 Read article