Search
380 articles for “compressive”
-
Mechanical Properties of Rice Husk Ash Based Concrete Composites
Abstract: The production of rice is important all over the world. The husk that is made is usually used as a combustible material to prepare fields, giving energy through both direct combustion and gasification. The material rice husk ash may be quite fine. A common particle size for rice husk ash is 3 to 75 µm. This research demonstrates how the rice husk ash affects the mechanical properties of concrete composites. …
Published in Journal of Polymer & Composites · Vol. 12, Issue 7, 2024 · pp. 67–72 Read article
-
Experimental Evaluation of Strength in Bacterial Concrete Mixtures
Abstract: The incorporation of bacteria into concrete, through the process of Microbiologically Induced Calcite Precipitation (MICP), offers a promising approach to enhancing the mechanical properties and durability of concrete. This research explores the effect of bacterial addition on the compressive strength, split tensile strength, flexural strength, and workability of concrete. Specifically, three bacterial strains—Bacillus megaterium, Bacillus subtilis, and Pseudomonas aeruginosa—were used in varying concentrations (10⁴, 10⁵, and 10⁶ cells/ml) and incorporated …
Published in Journal of Construction Engineering, Technology & Management · Vol. 14, Issue 3, 2024 · pp. 61–69 Read article
-
Evaluating the Structural Performance of Concrete with Partial Replacement of Fine Aggregate by Plastic Waste
Abstract: This work evaluates the performance of concrete incorporating plastic waste as a partial replacement for fine aggregate, at replacement levels of 0%, 5%, 10%, 15%, and 20%. Various tests were conducted on fresh and hardened concrete to assess workability, strength, and durability. The slump cone and compaction factor tests were used to measure workability, yielding a slump range between 25–30 mm and a compaction factor of 0.98, indicating medium workability. …
Published in Journal of Structural Engineering and Management · Vol. 11, Issue 3, 2024 · pp. 69–75 Read article
-
E-glass Fiber Epoxy Composites: Role of Al2O3/SiC Fillers in Physical, Flammability and Mechanical Characteristics
Abstract: This study investigates the effects of varying weight percentages of Silicon Carbide and Alumina particles in epoxy-based composites, fabricated through compression molding, on their physical and mechanical properties. Comparing different studies on carbon fiber-reinforced polymer (CFRP) composites, as well as glass fiber-reinforced polymer (GFRP) composites, especially with the reinforcement of nanoparticles such as silicon carbide (SiC), alumina (Al2O3) and graphene. The investigations cover fabrication methods, like vacuum infusion and compression …
Published in Journal of Polymer & Composites · Vol. 13, Issue 1, 2025 · pp. 238–250 Read article
-
Experimental Investigation on Strength and Durability Properties of Slag Based Alkali Activated Concrete Incorporating Fly Ash
Abstract: To minimize carbon emissions during cement production and to resolve landfill issues arising from industrial waste, the adoption of alkali-activated concrete (AAC) incorporating various by-products from industry has become increasingly popular as environmentally friendly option to conventional concrete in the construction sector. This study focused on strength and durability of AAC by utilizing waste industrial by-products such as ground granulated blast furnace slag (GGBS) and fly ash (FA) at ambient …
Published in Journal of Polymer & Composites · Vol. 13, Issue 2, 2025 · pp. 393–400 Read article
-
Assessing Concrete Strength Through Substituting Coarse Aggregate with Steel Slag and Cement with Bentonite Powder
Abstract: This study investigates the strength characteristics of concrete by partially replacing cement with bentonite powder and coarse aggregate with steel slag. The research aims to evaluate the mechanical performance of concrete through compressive strength, split tensile strength, and flexural strength tests. Bentonite powder is substituted at varying levels of 0, 10, 20, and 30%, while steel slag is incorporated consistently at 60% as a replacement for coarse aggregate. The objective …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 2, 2025 · pp. 1–8 Read article
-
Enhancing Concrete Durability and Mechanical Properties for Pavement Quality Concrete (PQC) Roads Using Basalt Fiber Reinforcement
Abstract: Concrete, by nature, is brittle and has a very low tensile capacity, which is a double whammy in transportation infrastructure, such as pavement quality concrete (PQC), for roadways, where we need durability and strength. One such method is the use of basalt fibre, as it is a much better way of enhancing the road runway way performance of concrete. This research studies the impact of the addition of basalt fibres …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 266–280 Read article
-
Evaluating the Optimal Alccofine-1203 Replacement Ratio in M20 Grade Concrete
Abstract: The primary objective of this research is to investigate the potential of partially replacing cement with Alccofine 1203 in M20 grade control concrete and to evaluate the resulting effects on the mechanical properties of the concrete. Alccofine 1203, a high-performance mineral admixture known for its ultrafine particle size and high reactivity, was used as a partial cement substitute at varying replacement levels of 5%, 10%, and 15% by weight of …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 294–299 Read article
-
Innovations and Comparative Analyses in Foam Concrete: A Review of Emerging Techniques and Materials
Abstract: Foam concrete, recognized for its lightweight and eco-friendly properties, is gaining prominence as a sustainable construction material. However, challenges such as low mechanical strength, performance variability, and limited environmental resistance have prompted significant innovations in recent years. This study synthesizes findings from three key studies focused on enhancing foam concrete’s performance through nanomaterials, natural fibers, and alternative lightweight aggregates. The incorporation of nano-silica and nano-calcium carbonate into coal gangue foam …
Published in Trends in Transport Engineering and Applications · Vol. 12, Issue 3, 2025 Read article
-
Mechanical Characterization of Hybrid Basalt Fiber Composites with Silicon Carbide Fillers
Abstract: Natural fiber composites (NFCs) have experienced significant growth and innovation in recent research because to their advantages over synthetic fiber composites, including their lower cost and environmental impact. This paper investigates the tension and compression properties of hybrid laminate composites composed of stainless-steel wire mesh, epoxy resin reinforced with basalt fibre, and silicon carbide (SiC) filler. Composites with varying weight percentages of SiC filler (0%, 1.5%, and 3%), were made …
Published in Journal of Polymer & Composites · Vol. 13, Issue 4, 2025 · pp. 582–593 Read article
-
Study on Evaluation of Mechanical Properties of Kerb Stone Incorporating Polypropylene Material for Enhanced Durability and Performance
Abstract: This study evaluates the mechanical properties of kerb stone incorporating polypropylene (PP) material, to enhance durability and performance. In the wake of increasing environmental concerns and the need for sustainable construction practices, the reuse of plastic waste, particularly polypropylene, has emerged as a promising solution. Polypropylene, known for its durability, resistance to chemical attacks, and low water absorption, offers significant potential when integrated into concrete products. In this research, standard …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 73–84 Read article
-
Comparative Analysis of Eco Friendly Brick with Red Bricks
Abstract: This research presents a comparative analysis between conventional red bricks and eco-friendly bricks made from mud, rice husk, and dry plant leaves. The aim is to evaluate the potential of using sustainable, low-cost, and locally available agricultural waste materials in brick production as an environmentally conscious alternative to traditional methods. The eco-bricks were manufactured without kiln firing, significantly reducing energy consumption and carbon emissions. A series of laboratory tests—including compressive …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 · pp. 42–46 Read article
-
Optimizing Mechanical and Durability Properties of Eco-Friendly Composite Materials Using Recycled Fillers and ML Techniques
Abstract: The increasing demand for sustainable construction materials has intensified the exploration of recycled fillers as partial or full replacements for natural aggregates in composite materials. This study investigates the mechanical and durability performance of polymer matrix composites incorporating processed recycled fillers derived from construction and demolition (C&D) waste. Three distinct processing methods were employed to prepare the recycled fillers: untreated (URF), single processed (SPRF), and double processed (DPRF), with replacement …
Published in Journal of Polymer & Composites · Vol. 13, Issue 5, 2025 · pp. 269–309 Read article
-
An Experimental Investigation of Polyethylene Terephthalate Fibers in the Properties of Concrete
Abstract: In India near about every year 45 million tons of solid waste is generated. The solid waste rate is increasing of 1.5 to 2% every year. In that total solid waste, Plastics contains 12.3% waste generated in which most common are the water bottles. Now the present worldwide situation, the production of PET (Polyethylene Terephthalate) exceeds 6.9 million tons per year. So that it is necessary to reusing of PET …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 1063–1072 Read article
-
Enhancing Mechanical and Durability Properties of Coconut Shell Concrete Using Fly Ash
Abstract: The increasing demand for sustainable and lightweight construction materials has driven research into alternative aggregates for concrete production. This study investigates the mechanical and durability properties of coconut shell (CS) concrete with varying percentages of fly ash replacement. The research evaluates compressive strength, split tensile strength, water absorption, and workability to determine the feasibility of CS concrete as a structural material. Experimental findings indicate that incorporating 10% fly ash (CSF10 …
Published in Recent Trends in Civil Engineering & Technology · Vol. 15, Issue 2, 2025 · pp. 19–24 Read article
-
Enhancement in Performance of Conventional concrete mixes by using hybridization with steel & polypropylene fibres
Abstract: This experimental study evaluates the influence of incorporating steel and polypropylene fibers on the mechanical performance of high- performance concrete (HPC) across M30, M35, and M40 grades. This research focuses on evaluating the mechanical properties of High- Performance Concrete (HPC) enhanced with a hybrid reinforcement system consisting of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers are utilized to improve the compressive and tensile strengths, while polypropylene fibers contribute …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Strength Enhancement of Concrete with Nano-Based Admixtures
Abstract: The integration of advanced nanomaterials such as nano-silica and nano-clay has emerged as a highly promising and innovative technique to significantly enhance the mechanical characteristics and long-term durability of conventional concrete. In this comprehensive study, the effects of nano-modification on various concrete properties, including workability, compressive strength, split tensile strength, and flexural behavior, were thoroughly evaluated through a systematic experimental program. A series of concrete mix designs incorporating varying proportions …
Published in Journal of Structural Engineering and Management · Vol. 12, Issue 3, 2025 Read article
-
Performance Evaluation of Concrete with Binary and Ternary Blends of Fly Ash, Silica Fume, and Fiber Reinforcement
Abstract: This study evaluates the effect of ground granulated blast furnace slag (GGBS) as a partial replacement for cement on the mechanical properties of concrete, focusing on compressive and split tensile strength. Concrete mixes were prepared with GGBS replacement levels of 0%, 25%, and 50% and subjected to different curing methods, including water curing, steam curing, and conceal curing. These curing methods were selected to investigate their impact on hydration, strength …
Published in Journal of Construction Engineering, Technology & Management · Vol. 15, Issue 3, 2025 · pp. 40–45 Read article
-
A Strategy for Safer and More Resilient Industrial Construction
Abstract: This study investigates the effects of incorporating steel and polypropylene fibers into high-performance concrete (HPC) to enhance its mechanical behavior and ensure greater safety in industrial structures. The research focuses on HPC mixtures of M30, M35, and M40 grades reinforced with a combination of steel fibers (SF) and polypropylene fibers (PPF). Steel fibers contribute to improved compressive and tensile strengths, while polypropylene fibers help control crack formation and dissipate energy …
Published in Journal of Industrial Safety Engineering · Vol. 12, Issue 3, 2025 · pp. 1–6 Read article
-
Performance Evaluation of PET Strip Fiber Reinforced Concrete
Abstract: Polyethylene Terephthalate, commonly known as PET, is a petroleum-based plastic polymer that is widely used in the packaging of various commodities due to its durability, and poses a major threat to the environment. To tackle this scenario, the construction industry is researching all possibilities to incorporate this waste into concrete and enhance the properties of concrete. The present study evaluates the performance characteristics of M 30 grade concrete when reinforced …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1076–1088 Read article