Search
163 articles for “X-rays”
-
Kinetics of Crystallization and Microstructural Evolution of Commercial Fluorophlogopite Machinable Glass- Ceramics in the System SrO∙4MgO∙Al2O3∙ 6SiO2∙2MgF2 with Varying in B2O3
Abstract: Glass materials based on fluorophlogopite stoichiometry with varying concentrations of B₂O₃ were synthesized using the melt-casting method, followed by heat treatment at different crystallization temperatures. The resulting glass and glass–ceramic samples were characterized using differential thermal analysis (DTA), scanning electron microscopy (SEM), X-ray diffraction (XRD), and Fourier-transform infrared (FT-IR) spectroscopy. Kinetic analysis revealed that the activation energies required for the formation of glass–ceramics were 192.77 kJ mol⁻¹ and 210.47 kJ …
Published in Journal of Thin Films, Coating Science Technology & Application · Vol. 12, Issue 3, 2025 · pp. 1–16 Read article
-
Exploration of Copper Oxide PVA/PEG Paraffin Polymer Composites for Enhanced Thermal Performance of Nano-Enhanced Phase Change Materials and Their Environmental Impact
Abstract: This study investigates the synthesis, characterization, and application of copper oxide (CuO) nanoparticles integrated into polymer-based paraffin wax composites for advanced thermal management applications. CuO nanoparticles were synthesized using a wet chemical approach and characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and dynamic light scattering (DLS), confirming their crystalline structure, morphology, and nanoscale size distribution. The synthesized nanoparticles were incorporated into polymer-supported phase change …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 156–173 Read article
-
Structural Modification of Sugarcane Bagasse using Alkaline, Acid, and Bleaching Pretreatments for Enhanced Yield of Poly (1→4)-β-D-glucopyranose (Cellulose) and Hemicellulose for Utilization as Biocomposites
Abstract: Sugarcane bagasse, a lignocellulosic byproduct generated in substantial quantities by the sugar industry, represents a promising feedstock for the sustainable production of enzymes and bio-based chemicals. Its high (1→4)-β-D-glucopyranose (cellulose) content, abundant availability, and low cost make it an ideal candidate for bioconversion processes. However, the inherent recalcitrance of bagasse, primarily due to its lignin-rich matrix, necessitates effective pretreatment strategies to enhance enzymatic digestibility. This study presents a comparative investigation …
Published in Journal of Polymer & Composites · Vol. 13, Issue 6, 2025 · pp. 983–992 Read article
-
Fabrication and Analysis of PBAT/Cyperus Rotundus Micro Crystalline Cellulose Biofilms for Food Packaging Applications
Abstract: Global plastic waste crisis has gained an increasing attention and many efforts have been made recently to develop biodegradable polymers as food packaging alternatives. Solution casting is used for fabrication and characterization of reinforced polybutylene adipate-co-terephthalate (PBAT) biofilm with Cyperus rotundus microcrystalline cellulose (CRC). PBAT-CRC biofilms with different CRC loadings (1%, and 2%) had been prepared and their structural, mechanical, thermal and morphological properties of fabricated biofilms were analyzed to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 591–599 Read article
-
Performance Evaluation of Green Walnut Husk Waste Extract for Inhibiting Aluminium 8088 Corrosion in Acidic Solution
Abstract: The cumulative call for environmental and supportable corrosion inhibitors has obsessed curiosity in exploiting plant-based agronomic surplus resources. Presented research work discovers the corrosion inhibition probable of green walnut husk extract(GWH)—a normal and plentiful agro-waste—on Aluminium 8088 alloy in an acidic medium. Aluminium 8088, however identified for its corrosion resistance, is vulnerable to squalor in highly acidic settings, affectation trials in several industrial claims. GWH extract act as an ecologically …
Published in Journal of Modern Chemistry & Chemical Technology · Vol. 17, Issue 1, 2026 · pp. 44–60 Read article
-
Synthesis, Characterization and Dielectric Properties of Polymer Materials for Microwave Communication Applications
Abstract: The rapid advancement in wireless communication technologies has necessitated the development of advanced materials with tailored dielectric properties. Polymer materials, because of their flexibility, lightweight nature, and processing ease, are currently being used in initiatives to formulate low-dielectric materials specifically tailored for microwave communication applications. In the current investigation, the authors concentrate on the synthesis, characterization, and dielectric properties of five distinct novel polymer materials. The synthesized polymers are characterized …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1482–1495 Read article
-
Activated Carbon Materials as Ideal Adsorbents for the Desulfurization of Fossil Fuels
Abstract: Removal of organosulfur compounds from diesel is of interest from scientific, social, economic, and environmental viewpoints. Production of clean fuel remains a primary goal of the petroleum refining industry. The reduction of sulfur content below stringent ppm levels in diesel fuels becomesincreasingly challenging due to the presence of sterically hindered sulfur compounds, such as 4,6- dialkyldibenzothiophenes, which are resistant to removal over conventional supported mixed sulfide hydrodesulfurization catalysts. Consequently, alternative …
Published in International Journal of Pollution: Prevention & Control · Vol. 4, Issue 1, 2026 · pp. 28–34 Read article
-
Structure–Optical Property Correlation of Co-Doped TiO₂ and ZnO Nanofillers for Advanced Functional Composite Applications
Abstract: This study investigates the enhancement of the structural and optical properties of titanium dioxide (TiO₂) and zinc oxide (ZnO) nanoparticles through cobalt (Co) doping. Pristine TiO₂ and ZnO are widely studied metal oxides; however, their large band gaps and limited visible-light absorption restrict their performance in optoelectronic, photocatalytic, and environmental applications. Co doping is employed as an effective strategy to overcome these limitations by inducing band-gap narrowing, creating defect-related electronic …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1374–1394 Read article
-
Spin Coated Polyvinylidene Difluoride / Ionic Liquid Nanocomposite Thin Films with Enhanced Dielectric and Piezoelectric Properties
Abstract: This study introduces a novel approach to enhance the piezoelectric and dielectric properties of polyvinylidene difluoride (PVDF) by incorporating 1-butyl-3-methylimidazolium tetrafluoroborate ([BMIM][BF₄]) ionic liquid via a spin-coating method— a processing route that has been rarely reported for PVDF/ionic liquid composites. Structural and morphological analyses using X-ray diffraction (XRD), Raman spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) confirm the successful integration of [BMIM][BF₄] into the PVDF matrix. The …
Published in Journal of Polymer & Composites · Vol. 14, Issue 1, 2026 · pp. 1190–1204 Read article
-
Utilization of Treated Textile Dyeing Wastewater and GGBFS–Perlite Blends for Sustainable Cementitious Composite Development
Abstract: The increasing global demand for concrete critically intensifies the consumption of potable water, raising significant environmental concerns and depleting vital resources. Concurrently, the textile dyeing industry generates substantial volumes of wastewater, posing considerable disposal and pollution challenges. Our investigation explores a dual solution by utilizing treated textile dyeing wastewater as an alternative mixing water source, combined with ground granulated blast furnace slag (GGBFS) and perlite as supplementary cementitious materials (SCMs), …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 291–300 Read article
-
Gamma Irradiation Effects on Structural and Optical Properties of PVA/Al₂O₃/TiC Polymer Nanocomposites for Optoelectronic Applications
Abstract: PVA/TiC/Al2O3 nanocomposite (PTA) films were successfully prepared via the solution casting method. The impact of high-dose gamma (γ) irradiation (30 kGy) on the structural and optical properties of PVA/TiC/Al2O3 nanocomposites was systematically explored using X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), and UV–Visible spectroscopy. XRD analysis confirmed the semi-crystalline nature of the nanocomposites, which was found to decrease upon incorporation of Al₂O₃ nanoparticles and exposure to …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 717–729 Read article
-
Effect of Gamma and Electron Beam Irradiations on Crystalline and Gelatinization Properties of Edible Potato Starch
Abstract: Exposure of food material to radiation causes changes in crystalline (damage of crystal structure / lattice distortion), and gelatinization (digestive)properties. Potato starch (PS) is one of the important globally used food supplement in different forms like chips, curries, cusins etc. During its use the PS is exposed to radiations, altering its molecular structure (due to chain cleavages) and bring changes in structural and physical properties ; sometimes ill – effects …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 113–127 Read article
-
Synthesis of Glass Fiber Reinforced Polymer Composites Incorporating MWCNTS and Graphene: A Study on Dynamic Mechanical Behavior and Cole–Cole Representation
Abstract: Glass fiber reinforced polymer (GFRP) composites were fabricated using multi-walled carbon nanotubes (MWCNTs) and graphene as nanofillers through the hand lay-up technique. Two sets of composites were prepared by incorporating MWCNTs and graphene separately into the epoxy resin matrix at varying weight percentages (2%, 4%, 6%, 8%, and 10%). Mechanical and viscoelastic properties were evaluated following ASTM standards, and Dynamic Mechanical Analysis (DMA) was performed to study their mechanical and …
Published in Journal of Polymer & Composites · Vol. 14, Issue 2, 2026 · pp. 1411–1403 Read article
-
Fabrication and Comparative Study of Synthetic and Eggshell Waste Derived Hydroxyapatite-Based Composites for Biomedical Applications
Abstract: Hydroxyapatite is widely used as a bioceramic material in orthopedic and dental field because of its exceptional biocompatibility and bioactivity. Hydroxyapatite (HAp) doped with several mineral ions has been frequently reported to further enhance its bioactive nature. Several studies indicate that biological waste materials can serve as calcium sources for hydroxyapatite synthesis, with eggshells being one such promising source. In the present work, two types of hydroxyapatite were synthesized: pure …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 33–46 Read article
-
Effect of Red Mud Loading on the Thermal and Mechanical Performance of Polypropylene Composites
Abstract: Waste red mud (RM) serves as a low-cost and sustainable filler material in a polypropylene (PP) matrix. This study investigate the effects of different red mud contents on the dynamic mechanical and thermal properties of polypropylene-red mud (RM-PP) composites where red mud levels range from 0% to 40% (based on weight percentage). Fourier Transform Infrared Spectroscopy (FTIR) was conducted for verifying the presence of both polypropylene and red mud in …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 161–169 Read article
-
Valorization of Human and Cattle Dental Waste into Functional Composite Biomaterials: A Detailed Comparative Analysis
Abstract: This study investigates the conversion of human and cattle (goat and cow) teeth into bioactive hydroxyapatite-based composites and presents a detailed comparative evaluation of these biogenic materials with laboratory-synthesised (synthetic) hydroxyapatite (HAp). In this work, hydroxyapatite was extracted from human and bovine teeth through controlled calcination and milling, while synthetic HAp was prepared using a standard wet chemical precipitation route. All materials were subsequently sintered at 900 °C and fabricated …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 340–354 Read article
-
Polymer-Mediated Electron Transfer in Eco-Friendly P3HT–rGO Nanocomposites for Optoelectronic Applications
Abstract: Conducting polymer–graphene hybrid nanocomposites have emerged as promising materials for next-generation optoelectronic applications owing to their solution processability, tunable interfacial properties, and mechanical flexibility. Recent studies have highlighted the importance of graphene–polymer hybrid systems in enhancing charge transport pathways, exciton dissociation efficiency, and interfacial stability in organic optoelectronic devices. Despite these advantages, a key challenge remains the efficient production of individual graphene sheets through the reduction of graphene oxide using …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 413–423 Read article
-
High-Performance Polymer Composite Membranes for Selective Ion Transport in Advanced Energy Conversion Systems
Abstract: The development of high-performance Polymer Composite Membranes (PCM) with enhanced ion transport is essential for Polymer Electrolyte Membrane Fuel Cells (PEMFC). However, low-humidity conditions and filter agglomeration still limit long-term membrane stability. This research designs a functionalized PCM integrating cross-linked Poly (Vinyl Alcohol)/Poly (Ethylene Glycol) (PVA/PEG) matrix with sulfonic acid functional groups and Titanium Dioxide (TiO₂) nanofillers to improve selective ion transport under low-humidity conditions. Two types of PCM were …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 724–736 Read article
-
Machine Learning Based Optimization of Polymer Structure Property Relationships in Composite Material Systems
Abstract: In modern engineering applications, polymer-based composite materials have garnered a lot of attention because of their lightweight nature, high strength-to-weight ratio, and changing physical features. In order to maximize the relationships between polymer structure and properties in composite materials, this study suggests a strategy based on reinforcement learning (RL). The research utilized the Polymer Composite Properties Dataset, which contains 12,700 records associated with polymer matrices, reinforcement fillers, interfacial bonding characteristics, …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 · pp. 242–255 Read article
-
Hybrid Polymer Composites Reinforced with Coconut Shell Fillers and Silica Fume: Synergistic Effects of Industrial By-Products : A Comprehensive Review
Abstract: The increasing requirement of sustainable and high-performance engineering materials has led to increased research in hybrid polymer composites comprising sustainable fillers in the form of renewable biomass or industrial by-products. Among the various bio-fillers that exist, coconut shell filler is gaining much prominence due to its low density, high content of lignin, hardness, and abundance as agricultural waste. Another industrial by-product that is rich in amorphous silica and possesses high …
Published in Journal of Polymer & Composites · Vol. 14, Issue 3, 2026 Read article